gyrex

FYI: Just downloaded and flashed Armbian 24.2.1 Bookworm CLI and it boots ok.

Hi guys, I downloaded Armbian 24.2.1 Jammy CLI (Armbian_24.2.1_Orangepizeroplus_jammy_current_6.6.16.img.xz) for the Orange Pi Zero Plus and it's not booting. Boot log below: U-Boot SPL 2024.01-armbian (Feb 09 2024 - 19:21:37 +0000) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):armbian NOTICE: BL31: Built : 19:20:27, Feb 9 2024 NOTICE: BL31: Detected Allwinner H5 SoC (1718) NOTICE: BL31: Found U-Boot DTB at 0x20a4ef0, model: Xunlong Orange Pi Zero Plus INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller NOTICE: PMIC: Assuming H5 reference regulator design INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied SCP/INF: Crust v0.6.10000 INFO: PSCI: Suspend is available via SCPI INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2024.01-armbian (Feb 09 2024 - 19:21:37 +0000) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: Xunlong Orange Pi Zero Plus DRAM: 512 MiB Core: 67 devices, 20 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from FAT... MMC: no card present ** Bad device specification mmc 0 ** In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: eth0: ethernet@1c30000 MMC: no card present ** Bad device specification mmc 0 ** Couldn't find partition mmc 0 MMC: no card present ** Bad device specification mmc 0 ** Couldn't find partition mmc 0 starting USB... Bus usb@1c1a000: sun4i_usb_phy phy@1c19400: External vbus detected, not enabling our own vbus USB EHCI 1.00 Bus usb@1c1a400: USB OHCI 1.0 Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1b400: USB OHCI 1.0 scanning bus usb@1c1a000 for devices... 1 USB Device(s) found scanning bus usb@1c1a400 for devices... 1 USB Device(s) found scanning bus usb@1c1b000 for devices... 1 USB Device(s) found scanning bus usb@1c1b400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop MMC: no card present Device 0: unknown device ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-02-01-a6-4a-c9-69 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/00000000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/0000000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/000000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/00000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/0000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/000 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/00 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/0 ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/default-arm-sunxi ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/default-arm ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Retrieving file: pxelinux.cfg/default ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Config file not found ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! => %

I'm using the latest image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53.img.xz and wifi isn't working. Is there something I need to do to load the module or something? sudo nmcli device show GENERAL.DEVICE: end0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 02:00:9E:C4:55:73 GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2 WIRED-PROPERTIES.CARRIER: on IP4.ADDRESS[1]: 10.11.12.140/24 IP4.GATEWAY: 10.11.12.1 IP4.ROUTE[1]: dst = 10.11.12.0/24, nh = 0.0.0.0, mt = 100 IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 10.11.12.1, mt = 100 IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000 IP4.DNS[1]: 10.11.12.1 IP4.DOMAIN[1]: lan IP4.SEARCHES[1]: lan IP6.ADDRESS[1]: fe80::573f:9a69:7cbf:6308/64 IP6.GATEWAY: -- IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 1024 GENERAL.DEVICE: lo GENERAL.TYPE: loopback GENERAL.HWADDR: 00:00:00:00:00:00 GENERAL.MTU: 65536 GENERAL.STATE: 100 (connected (externally)) GENERAL.CONNECTION: lo GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1 IP4.ADDRESS[1]: 127.0.0.1/8 IP4.GATEWAY: -- IP6.ADDRESS[1]: ::1/128 IP6.GATEWAY: -- I've also tried loading the edge kernel (Linux opizero2 6.4.12-edge-sunxi64 #1 SMP Wed Aug 23 15:32:56 UTC 2023 aarch64 GNU/Linux) and that's not working either.

Hi Gunjan, how does one upgrade from the 6.1 to the 6.5 kernel?

I also tried the Bullseye legacy kernel image Armbian_22.11.3_Orangepizero2_bullseye_legacy_4.9.318.img and after running my first apt update/upgrade I get this: Found U-Boot script /boot/boot.scr 3259 bytes read in 15 ms (211.9 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 190 bytes read in 11 ms (16.6 KiB/s) 262144 bytes read in 42 ms (6 MiB/s) ** File not found /boot/dtb/allwinner/overlay/-fixup.scr ** 7227822 bytes read in 625 ms (11 MiB/s) ** File not found /boot/Image ** Unknown command 'booti' - try 'help' SCRIPT FAILED: continuing... No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-sunxi No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found.

WiFi isn't working on the current legacy image: Armbian_22.11.3_Orangepizero2_jammy_legacy_4.9.318.img [FAILED] Failed to start Access poi…server for Wi-Fi and Ethernet. See 'systemctl status hostapd.service' for details. [ OK ] Finished OpenVPN service. openvpn.service [ OK ] Started /etc/rc.local Compatibility. rc-local.service rpc-statd-notify.service [ OK ] Started Notify NFS peers of a restart. [ OK ] Finished Permit User Sessions. systemd-user-sessions.service [ OK ] Started Bluetooth service. bluetooth.service [ OK ] Reached target Bluetooth Support. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... Starting LSB: Set sysfs variables from /etc/sysfs.conf... Starting Hostname Service... [ OK ] Finished resolvconf-pull-resolved.service. [ OK ] Finished Hold until boot process finishes up. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Terminate Plymouth Boot Screen. [ 19.330374] proc: unrecognized mount option "hidepid=invisible" or missing value Armbian 22.11.3 Jammy ttyS0 orangepizero2 login: [ 22.434473] WCN_ERR: dumpmem_rx_callback open error no.-21 retry:1 [ 22.608383] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 22.726784] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 22.845212] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 22.963555] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.081861] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.200187] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.318572] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.437000] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.555333] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.673674] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.792089] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 23.910506] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.028921] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.147344] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.265778] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.384217] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.502618] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.621046] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.739480] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.857837] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 24.976168] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.094571] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.212879] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.331223] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.449659] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.568189] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.686517] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.804861] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 25.923205] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 26.041563] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 26.159978] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! [ 26.166416] sunxi-mmc sdc1: retry:set phase failed or over retry times [ 26.173888] sunxi-mmc sdc1: retry:give up [ 26.178527] sdiohal err:dt read fail ret:-110, system_addr=0x4024f000 [ 26.187652] WCN_ERR: mdbg_dump_data dump memory error:-110 [ 26.193952] WCN_ERR: read HCI_ARM_WR_RD_MODE reg error:-1 [ 26.200105] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.206191] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.212273] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.218347] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.224430] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.230510] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.236538] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.242632] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.248709] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 26.254770] WCN_ERR: mdbg_dump_data dump memory error:-1 [ 35.679877] WCN_ERR: Not dump again!