Search the Community

Hi. I am working with an Olinuxino A20 micro, but I have issues with the SPI bus. I hope somebody can help me to find a solution. I used Armbian 23.5 Bookworm with kernel 6.1 In sclk signal i have a pulse before to start the data transmission, I required the SPI to communicate a LoRa module but the pulse before of data generate that doesn´t work the LoRa module. I attached the signals.

Hello folks, I'm having trouble booting https://dl.armbian.com/lime-a64/Debian_stretch_next_nightly.7z as of today on my A64-OLinuXino-1G4GW. Armbian is installed on an external µSD card; the device has internal flash. Do you see, how I can fix this issue? Thanks, yanosz Log is: U-Boot 2018.05-armbian (Aug 21 2018 - 08:46:56 +0200) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: Olimex A64-Olinuxino DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Failed (-5) In: serial Out: serial Err: serial Net: No ethernet found. 230454 bytes read in 21 ms (10.5 MiB/s) starting USB... No controllers found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3090 bytes read in 15 ms (201.2 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 104 bytes read in 12 ms (7.8 KiB/s) 31652 bytes read in 23 ms (1.3 MiB/s) 3795 bytes read in 23 ms (161.1 KiB/s) Applying kernel provided DT fixup script (sun50i-a64-fixup.scr) ## Executing script at 44000000 4922442 bytes read in 260 ms (18.1 MiB/s) ** fs_devread read error ** ** File not found /boot/Image ** Bad Linux ARM64 Image magic! SCRIPT FAILED: continuing... switch to partitions #0, OK mmc1(part 0) is current device ** No partition table - mmc 1 ** starting USB... No controllers found USB is stopped. Please issue 'usb start' first. starting USB... No controllers found No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found.

Hi! The jessy vanilla image works fine, but when I boot the Olinuxino Micro with a SATA HDD connected, I don't have ethernet/ssh access anymore. Even reboot _without_ the HDD doesn't work, I need to restore the content of /boot with an SD-card-reader to make it work again. Sorry, I am (yet) not really into sunxi/uboot/kernel topics, so maybe there's a simple explanation to this behaviour?

I wanted to try 3.4 to see if I could build FFmpeg with the legacy Kernel. When I run any of the three (Trusty, Jessie, Wheezy) as soon as the script says starting Kernel, I get a few blue and green noise lines on the screen and then the screen disappears. I can use SSH and.the system is booting up and running. The one thing that I noticed is that when I log on, the name of the machine is LIME instead of MICRO. I'm running an Olimex Olinuxino Micro. Is there a config file that I need to tweek, or is the Kernel setup for a LIME? thanks MikeC

You know in Waynes World when the boys went to the Alice Cooper concert and got to meet Alice Cooper (they were his biggest fans)..... All they could say was "We're not Worthy.... We're not Worthy". That is the way I feel after downloading and installing the Jessie version of Armbian for my Olimex Micro. My hat is off to you.... Great Job!!!! It blows that awful SD I got from Olimex away..... I really want to see your desktop now.....

I live in the desert in California and the only Internet access I have is using PDANet on my phone. Is there a way to build an SD Card using rufus (which is a great app by the way) that I can use to load LXDE on my Olimex Micro? Once I get the desktop loaded I will get PDANet working on Olimex, but this seems like the lessor of two evils. I have both Jessie and Wheezy working and I'm still running off of the SDCard's. I have SSH working in both versions if that helps. thanks in advance. Mike

Good morning, I am trying to compile the lastest sources for the olinuxino-a20-micro and it fails on building libvdpau. VM guest is Ubuntu Mate 14.04 Here is what the actual error is (I left out the rest of the console log since it was fine): Cloning into '/home/deskwizard/A20-armbian/output/cache/sdcard/tmp/libvdpau-sunxi'... remote: Counting objects: 609, done. remote: Compressing objects: 100% (26/26), done. remote: Total 609 (delta 15), reused 1 (delta 1), pack-reused 582 Receiving objects: 100% (609/609), 299.91 KiB | 0 bytes/s, done. Resolving deltas: 100% (407/407), done. Checking connectivity... done. cc -MD -MP -MQ device.o -fpic -fvisibility=hidden -Wall -O3 -c device.c -o device.o cc -MD -MP -MQ presentation_queue.o -fpic -fvisibility=hidden -Wall -O3 -c presentation_queue.c -o presentation_queue.o cc -MD -MP -MQ surface_output.o -fpic -fvisibility=hidden -Wall -O3 -c surface_output.c -o surface_output.o cc -MD -MP -MQ surface_video.o -fpic -fvisibility=hidden -Wall -O3 -c surface_video.c -o surface_video.o cc -MD -MP -MQ surface_bitmap.o -fpic -fvisibility=hidden -Wall -O3 -c surface_bitmap.c -o surface_bitmap.o cc -MD -MP -MQ video_mixer.o -fpic -fvisibility=hidden -Wall -O3 -c video_mixer.c -o video_mixer.o cc -MD -MP -MQ decoder.o -fpic -fvisibility=hidden -Wall -O3 -c decoder.c -o decoder.o decoder.c: In function 'vdp_decoder_create': decoder.c:63:7: error: 'VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE' undeclared (first use in this function) case VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE: ^ decoder.c:63:7: note: each undeclared identifier is reported only once for each function it appears in decoder.c:64:7: error: 'VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH' undeclared (first use in this function) case VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH: ^ decoder.c: In function 'vdp_decoder_query_capabilities': decoder.c:188:7: error: 'VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE' undeclared (first use in this function) case VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE: ^ decoder.c:189:7: error: 'VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH' undeclared (first use in this function) case VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH: ^ make: *** [decoder.o] Error 1 cp: cannot stat ‘/home/deskwizard/A20-armbian/output/cache/sdcard/tmp/libvdpau-sunxi/libvdpau_sunxi.so.1’: No such file or directory Any pointers on what the issue might be or ways to figure it out ? Thanks, Deskwizard