Search the Community
Showing results for tags 'opi3'.
Hello, problem is next: my Orange Pi 3 now can't get IP address from my router. To solve it, I've connected via USB-TTL and on step "login:" it totally stucks and doesn't response for keyboard. What variants do I have, except reinstall OS? :) U-Boot SPL 2020.10-armbian (Feb 04 2021 - 00:24:13 +0100) DRAM: 2048 MiB Trying to boot from MMC2 NOTICE: BL31: v2.2(debug):a04808c-dirty NOTICE: BL31: Built : 00:24:06, Feb 4 2021 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07e188, model: OrangePi 3 INFO: ARM GICv2 driver initialized NOTICE
Hi guys! I have a problem with Orange Pi 3. After a night leaving the small board turned on I reboot the board and try to use a Bluetooth connector it shutdown. Again and again the same problem. When I touched the board it was so hot. Even when I use outside the case the board can't support a process for at least 30 minutes without turning off. I got the outputs of dmesg. As I don't know, I am a replay newbie, I ask for help here. Best regards. Paulo
Hi guys! I am making a separated network to connect my OPi3 to my old notebook to run some codes of my research. So, the problems is with ethernet connector in Orange Pi 3 that when I connect the cable from OPi3 to my switch LEDs just flash slow and in big intervals. When I try to ping from OPi3 to computer the ping just happens after big time later. I verify the cable and the switch with other devices (my personal notebook and my notebook from work). Everything is ok and running well. One thing blow my mind: when I connect cable from OPi3 directly to my notebook the L