shadowpho Posted March 9, 2021 Share Posted March 9, 2021 Armbianmonitor: https://justpaste.it/5jszu https://justpaste.it/5jszu I tried with I2C connected and disconnected between screen and tinkerboard. No change. (See below, looks like i2c-3/3-0045/tinker_mcu_bl is missing ). I checked around that area and tinker_mcu_bl is missing, but folder 3-0045 exists with lots of files in there. (bottom of the post) From dmesg I also see that i2c had a failure (ret = -6). (see next paste) Looking forward I see that -6 is no device found on i2c bus (assuming that's correct?). Does anyone know if brightness control works? [ 2.446829] tinker-mcu: tinker_mcu_probe: address = 0x45 [ 2.446843] tinker-mcu: send_cmds: 80 [ 2.493126] tinker-mcu: init_cmd_check: recv_cmds: 0xC3 [ 3.161121] tinker_mcu_screen_power_up [ 3.161122] tinker-mcu: tinker_mcu_screen_power_up: [ 3.161127] tinker-mcu: send_cmds: 8500 [ 4.545081] tinker-mcu: send_cmds: 8501 [ 4.569108] tinker-mcu: send_cmds: 8104 [ 4.572138] tinker-mcu: send_cmds: send command failed, ret = -6 [ 4.574293] tinker-mcu: tinker_mcu_set_bright: bright = 0xff shadowpho@tinkerboard:~$ sudo rpi-backlight -Btinker-board -p toggle Traceback (most recent call last): File "/usr/local/bin/rpi-backlight", line 10, in <module> sys.exit(main()) File "/usr/local/lib/python3.7/dist-packages/rpi_backlight/cli.py", line 103, in main if backlight.power: File "/usr/local/lib/python3.7/dist-packages/rpi_backlight/__init__.py", line 213, in power return bool(self._get_value("tinker_mcu_bl")) File "/usr/local/lib/python3.7/dist-packages/rpi_backlight/__init__.py", line 85, in _get_value raise e File "/usr/local/lib/python3.7/dist-packages/rpi_backlight/__init__.py", line 77, in _get_value return int((self._backlight_sysfs_path / name).read_text()) File "/usr/lib/python3.7/pathlib.py", line 1199, in read_text with self.open(mode='r', encoding=encoding, errors=errors) as f: File "/usr/lib/python3.7/pathlib.py", line 1186, in open opener=self._opener) File "/usr/lib/python3.7/pathlib.py", line 1039, in _opener return self._accessor.open(self, flags, mode) FileNotFoundError: [Errno 2] No such file or directory: '/sys/devices/platform/ff150000.i2c/i2c-3/3-0045/tinker_mcu_bl' 0 Quote Link to comment Share on other sites More sharing options...
shadowpho Posted March 9, 2021 Author Share Posted March 9, 2021 Oh no. Then I updated to 21.02.03 with 5.10.21-rockchip and now the display doesn't work at all 0 Quote Link to comment Share on other sites More sharing options...
q4a Posted September 10, 2021 Share Posted September 10, 2021 Sorry for post in old topic, but I can't change brightness via GUI on my ASUS tinker board (RK3288) with Ubuntu focal (21.05.8 + kernel 5.10.43-rockchip) and LXQt. I tried to change brightness from terminal with: xbacklight, xrandr and rpi-backlight - it did not help, but ddcutil (DDC/CI - Display Data Channel Command Interface): // make sure, that feature 10 is brightness $ sudo ddcutil capabilities | grep "Feature: 10" Feature: 10 (Brightness) // get current brightness $ ddcutil getvcp 10 VCP code 0x10 (Brightness ): current value = 60, max value = 100 // set current brightness $ sudo ddcutil setvcp 10 40 Some more info about ddcutil can be found on Arch wiki: https://wiki.archlinux.org/title/backlight#External_monitors I'm fine with changing brightness from terminal for now, but if you know better solution - post it here, please. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.