malaga 0 Posted March 16 Share Posted March 16 dear community, i am not sure which sbc- this udoo is: which version of udoo well i guess -that this is a Udoo Quad Makerboard Rev. D. question: can i connect this to a SATA Board !? Note i want to build up a NAS/ Samba server. can i do that with this UDoo quad found the following specs CPU NXP i.MX 6 ARM Cortex-A9 Quad core 1GHz GPU Vivante GC 2000 + Vivante GC 355 + Vivante GC 320 Integrated accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™ Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due) RAM DDR3 1GB 76 fully available GPIO: 62 digital + 14 digital/analog Arduino-compatible R3 1.0 pinout HDMI and LVDS + Touch 2 Micro USB (1 OTG type a+b) 2 USB type A (x2) and 1 USB connector (requires a specific wire) Analog Audio and Mic CSI Camera Connection on board Micro SD card reader (boot device) Input Voltage (recommended) 6-15 V Ethernet RJ45 (10/100/1000 MBit) WiFi Module SATA are they still correct - and do the de the question is - which operating-system should i choose here!? 0 Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.