Delay IR keycode repeat Orange Pi Zero

[hal8k]

Armbian Monitor

http://ix.io/3qFr

 

Im using Orange Pi Zero with Armbian Buster and  have ir-keytable installed.

 

The problem I'm facing is the the kernel is repeating the keycodes too fast.

See this useful link , half way down section 2

 

https://www.sigmdel.ca/michel/ha/opi/ir_03_en.html#ir_keytable

 

My remote control is using rc5 protocol  and I have set delay and repeat delay with ir-keytable:

 

sudo ir-keytable -D 500 -P 500 -d /dev/input/event0

 

Testing with evtest  (event 0  on the Orange Pi 0)

displays key events in the consol, and ignores delays set by ir-keytable, keys are repeated about 5 times a second.

 

 

If anyone wants to test a remote after installing ir-keytable then a quick way to check a remote is to install all protocols with:
 

sudo ir-keytable -p all

ir-keytable  -t

 

Thanks in advance to anyone who can help

I may go back to using lirc if there is no way around this problem.