RSS Bot Posted July 14, 2022 Share Posted July 14, 2022 At the beginning of the year, we wrote about WCH CH32V307 RISC-V microcontroller and a development board with 8 UART ports controlled over Ethernet. I’ve now been informed of a similar, but much more compact by VCC-GND Studio named “YD-CH32V307VCT6”. Besides the 144 MHz RISC-V microcontroller, the board features a 10Mbps Ethernet port, two USB Type-C ports, SPI flash, EEPROM, a microSD card socket, and four rows of 24 pins each for a total of 96 pins exposing all pins out of the LQFP100 package. YD-CH32V307VCT6 board specifications: MCU – WCH CH32V307VCT6 32-bit RISC-V microcontroller @ 144 MHz with 256K Flash, 64K SRAM Storage – 32Mbit SPI NOR flash (W25Q32), 64kbit EEPROM (24C64), MicroSD card slot Networking – 10 Mbps Ethernet USB – 1x USB 2.0 Type-C port (High Speed: 480 Mbps), 1x USB 2.0 Type-C port (Full Speed: 12 Mbps) Expansion – 2x 48-pin headers with 2 x 12-bit [...] The post YD-CH32V307VCT6 RISC-V MCU board comes with Ethernet and plenty of I/Os appeared first on CNX Software - Embedded Systems News. View the full article Link to comment Share on other sites More sharing options...
Luciano Posted November 14, 2023 Share Posted November 14, 2023 I try to work with a WCH board mounting a CH32V307VCT6 microcontroller.I find a data shee (witn pins etc..) but non a reference manual. You know if is available reference manual specifyng the register strucure so i can try to progam it? Link to comment Share on other sites More sharing options...
Recommended Posts