Jump to content

[Armbian build PR] - Add WiP `Mekotronics` R58 boards (`rockchip-rk3588`)


Recommended Posts

Posted

Add WiP Mekotronics R58 boards (rockchip-rk3588)

mekotronics.com

  • rockchip-rk3588: add new board mekotronics-r58-minipc.wip (Mekotronics R58 MiniPC, and variants)
  • rockchip-rk3588: add new board mekotronics-r58x.wip (Mekotronics R58X)
  • rockchip-rk3588: add new board mekotronics-r58x-4g.wip (Mekotronics R58X-4G); add u-boot patches
  • rockchip-rk3588: set ROCKUSB_BLOB for RockUSB Maskrom -> Loader mode

u-boot: same as Radxa Rock-5A. RockUSB and UMS works; boot from eMMC only. No USB, no NVMe. Can stop u-boot by holding Shift-M during boot on serial console.

Kernel: was handled at https://github.com/armbian/linux-rockchip/pull/12 and https://github.com/armbian/linux-rockchip/pull/14 is pending.

Thanks @amazingfate for the kernel reviews and @monkaBlyat for the DTS's, and @NicoD-SBC for the R58X-4G unit.

the thing where the hell is the serial debug uart

Pinout is under the board. On this picture: bottom is GND, middle is RX and top is TX

View the full article

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines