Jump to content

[CNX-Software] - T-HMI ESP32-S3 board comes with an 2.8-inch touchscreen color display, three Grove expansion connectors


RSS Bot

Recommended Posts

ESP32-S3 HMI board resistive touch panel

Lilygo has launched yet another ESP32-S3 board with an integrated display, but the T-HMI has a larger 2.8-inch color display and a resistive touch panel suitable for HMI (Human Machine Interfaces). It is also equipped with three Grove connectors for expansion with sensors or actuators. Like all the recent ESP32-S3 boards from Lilygo, the T-HMI features the ESP32-S3NR8 WiFi 4 and Bluetooth MCU with 8MB PSRAM, as well as a 16MB SPI flash, a microSD card slot, a few buttons, and power from USB or a LiPo battery. Lilygo T-HMI board specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, 8MB PSRAM, wireless connectivity Storage – 16MB SPI flash, microSD card socket Connectivity via ESP32-S3 2.4 GHz 802.11 b/g/n Wi-Fi 4 with 40 MHz bandwidth support Bluetooth Low Energy (BLE) 5.0 connectivity with long-range support, up [...]

The post T-HMI ESP32-S3 board comes with an 2.8-inch touchscreen color display, three Grove expansion connectors appeared first on CNX Software - Embedded Systems News.

View the full article

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines