Sewyboowy Posted May 15, 2023 Share Posted May 15, 2023 Hi everyone! I've just got a new odroid c4 and am trying to hook it up to a small i2c oled display. I've wired it up to the I2C A SCA and SCL pins with 3.3V and GND as needed, and enabled both I2C A and B in armbian-config. However, when I run i2cdetect -y 0 I get the device grid with a 30 in position 30 and nothing else, both with the display hooked up or not, nothing changes. Is there anything obvious I might have missed to get I2C running? Thanks in advance for your help! 0 Quote Link to comment Share on other sites More sharing options...
dokw Posted May 21, 2023 Share Posted May 21, 2023 I have a similar problem with i2c. And I think it's related to the kernel. I posted here months ago but haven't got any reply. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.