How to install armbian in h618?

[firepower]

There was ssv6x5x android drivers in the tanix and vontar firmware i upload.

You could try them.

 

https://forum.armbian.com/topic/29794-how-to-install-armbian-in-h618/page/20/#findComment-217879

Edited 18 minutes ago by firepower

[svyatoslav]

 E: Unable to correct problems, you have held broken packages.
[💥] error! [ Failed to install host packages; make sure you have a sane sources.list.  ]
[💥] Cleaning up [ please wait for cleanups to finish ]
 

[svyatoslav]

firepower

https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_Vontar-h618_bookworm_edge_6.12.11_xfce_desktop.img.xz

https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_Transpeed-8k618-t_bookworm_edge_6.12.11_xfce_desktop.img.xz

this?

[Nick A]

@svyatoslav there’s android firmware but the Linux driver is old. Your dmesg doesn’t show any wifi info because there’s no driver. Unless you know how modify kernel drivers I would forget about it and use a usb wifi adapter.

Edited 6 hours ago by Nick A

[svyatoslav]

Unfortunately, the USB adapter was not detected either, there is still no sound.

this image used: Armbian-unofficial_25.05.0-trunk_Transpeed-8k618-t_bookworm_edge_6.12.11_xfce_desktop.img

[svyatoslav]

2 часа назад, firepower сказал:

There was ssv6x5x android drivers in the tanix and vontar firmware i upload.

You could try them

Please give me a link to your image.

I'm trying to make a micro computer for my child, so I'm puzzled by remaking the console, if he wants to watch cartoons he'll figure it out. This is useful, the kid is 6 years old and he only watches cartoons, both on TV and on the phone.

[979101h]

I have a box identical to the X98H. After installing the Armbian-unofficial_25.05.0-trunk_X98h_bookworm_edge_6.12.11_server.img.xz image compiled by Nike, the Ethernet port is not working. Here's the content returned by the dmesg command

[kvvvp]

1 час назад, svyatoslav сказал:

the USB adapter was not detected either, t

There is a stripped-down firmware in the Armbian images. Update it using armbian-config. Maybe the USB-WI-FI will work. But keep in mind that the updated firmware will take about 1 GB of memory.

[svyatoslav]

Они видны, но не работают.

root@x98h:~# lsusb
Шина 005 Устройство 002: ID 8301:0089 Беспроводная клавиатура Hapurs HPBT05R 2.4 G Mini Wireless Touchpad
Шина 005 Устройство 001: ID 1d6b:0001 Linux Foundation 1.1 корневой концентратор
Шина 003 Устройство 001: ID 1d6b:0002 Linux Foundation 2.0 корневой концентратор
Шина 004 Устройство 001: ID 1d6b:0001 Linux Foundation 1.1 корневой концентратор
Шина 002 Устройство 001: ID 1d6b:0002 Linux Foundation 2.0 корневой концентратор
Шина 006 Устройство 001: ID 1d6b:0001 Linux Foundation 1.1 корневой концентратор
Шина 001 Устройство 003: ID 148f:7601 Ralink Technology, Corp. Беспроводной адаптер MT7601U
Шина 001 Устройство 001: ID 1d6b:0002 Linux Foundation 2.0 корневой концентратор
Шина 007 Устройство 001: ID 1d6b:0002 Linux Foundation 2.0 корневой концентратор

Лучше всего работает: Armbian-unofficial_25.05.0-trunk_X98h_bookworm_edge_6.12.11_xfce_desktop., 

но нет Wi-Fi и звука.

dmesg.txt

Edited 3 hours ago by svyatoslav

[svyatoslav]

16.04.2025 в 05:10, firepower сказал:

Вот полная прошивка brcm wifi BT. Я обнаружил, что она может быть полезна для других устройств wifi BT.

 

no access

all links to your images are not available

Edited 3 hours ago by svyatoslav

[svyatoslav]

doesn't want to get ready, tell me where to go?

 

 

   E: Unable to correct problems, you have held broken packages.
[💥] error! [ Failed to install host packages; make sure you have a sane sources.list.  ]
[💥] Exiting with error 43 [ at /home/toor/build/lib/functions/logging/traps.sh:1
                exit_with_error() --> lib/functions/logging/traps.sh:1
     install_host_side_packages() --> lib/functions/host/host-utils.sh:81
      install_host_dependencies() --> lib/functions/host/prepare-host.sh:304
    prepare_host_noninteractive() --> lib/functions/host/prepare-host.sh:92
                do_with_logging() --> lib/functions/logging/section-logging.sh:81
                   prepare_host() --> lib/functions/host/prepare-host.sh:17
              prepare_host_init() --> lib/functions/main/start-end.sh:64
       main_default_start_build() --> lib/functions/main/start-end.sh:17
          do_with_default_build() --> lib/functions/main/default-build.sh:41
         cli_standard_build_run() --> lib/functions/cli/cli-build.sh:25
        armbian_cli_run_command() --> lib/functions/cli/utils-cli.sh:136
                 cli_entrypoint() --> lib/functions/cli/entrypoint.sh:176
                           main() --> compile.sh:50
 ]
[💥] Cleaning up [ please wait for cleanups to finish ]
 

[Nick A]

@svyatoslav are you using my latest build?

git clone https://github.com/NickAlilovic/build.git --branch v20250306

[svyatoslav]

18 минут назад, Nick A сказал:

git-клон https://github.com/NickAlilovic/build.git --branch v20250306

no

git clone https://github.com/armbian/build
 

[svyatoslav]

git-клон https://github.com/NickAlilovic/build.git --branch v20250306

same mistakes

 

[🌱] Installing host-side packages [ bison libc6-dev make dpkg-dev gcc ccache dwarves flex imagemagick libbison-dev libelf-dev libfdt-dev libfile-fcntllock-perl libmpc-dev libfl-dev lz4 libncurses-dev libssl-dev libusb-1.0-0-dev ntpdate patchutils pkg-config pv arch-test swig uuid-dev zlib1g-dev file tree expect colorized-logs zip pigz pbzip2 lzop zstd aria2 axel parallel rdfind libpython3-dev libffi-dev libgnutls28-dev gcc-aarch64-linux-gnu libc6-amd64-cross busybox gcc-arm-linux-gnueabi gcc-or1k-elf ]
[🔨]   E: Unable to correct problems, you have held broken packages.
[💥] error! [ Failed to install host packages; make sure you have a sane sources.list.  ]
[💥] Exiting with error 43 [ at /home/toor/build/lib/functions/logging/traps.sh:1
                exit_with_error() --> lib/functions/logging/traps.sh:1
     install_host_side_packages() --> lib/functions/host/host-utils.sh:81
      install_host_dependencies() --> lib/functions/host/prepare-host.sh:301
    prepare_host_noninteractive() --> lib/functions/host/prepare-host.sh:92
                do_with_logging() --> lib/functions/logging/section-logging.sh:81
                   prepare_host() --> lib/functions/host/prepare-host.sh:17
              prepare_host_init() --> lib/functions/main/start-end.sh:64
       main_default_start_build() --> lib/functions/main/start-end.sh:17
          do_with_default_build() --> lib/functions/main/default-build.sh:41
         cli_standard_build_run() --> lib/functions/cli/cli-build.sh:25
        armbian_cli_run_command() --> lib/functions/cli/utils-cli.sh:136
                 cli_entrypoint() --> lib/functions/cli/entrypoint.sh:176
                           main() --> compile.sh:50
 ]
[💥] Cleaning up [ please wait for cleanups to finish ]
[🌿] ANSI log file built; inspect it by running: [ less -RS output/logs/log-build-03e98215-6ec0-4f62-aee5-bd34c6d02252.log.ans ]
[🌱] Share log manually: [ use one of the commands below (or add SHARE_LOG=yes next time!) ]
[🌿] Share log manually: [ curl --data-binary @output/logs/log-build-03e98215-6ec0-4f62-aee5-bd34c6d02252.log.ans https://paste.armbian.com/log ]
[🌿] Share log manually: [ curl --data-binary @output/logs/log-build-03e98215-6ec0-4f62-aee5-bd34c6d02252.log.ans https://paste.armbian.de/log ]
[🌿] Share log manually: [ curl --data-binary @output/logs/log-build-03e98215-6ec0-4f62-aee5-bd34c6d02252.log.ans https://paste.next.armbian.com/log ]
[🌿] Share log manually: [ curl --data-binary @output/logs/log-build-03e98215-6ec0-4f62-aee5-bd34c6d02252.log.ans https://paste.armbian.eu/log ]
toor@orangepi3:~/build$
 

[Nick A]

Try installing these yourself before you build.. the build system recommends Ubuntu Jammy 22.04.x

 

sudo apt install  bison libc6-dev make dpkg-dev gcc ccache dwarves flex imagemagick libbison-dev libelf-dev libfdt-dev libfile-fcntllock-perl libmpc-dev libfl-dev lz4 libncurses-dev libssl-dev libusb-1.0-0-dev ntpdate patchutils pkg-config pv arch-test swig uuid-dev zlib1g-dev file tree expect colorized-logs zip pigz pbzip2 lzop zstd aria2 axel parallel rdfind libpython3-dev libffi-dev libgnutls28-dev gcc-aarch64-linux-gnu libc6-amd64-cross busybox gcc-arm-linux-gnueabi gcc-or1k-elf

Edited 1 hour ago by Nick A

[Nick A]

@979101h I have the original X98H. I'll test the image again on my box.

 

Edit:

Just tested the server image on my box. I have no issues with Ethernet.

I have all the same messages but your missing.

end0:Link is up - 100Mbps/Full - flow control rx/tx

Edited 19 minutes ago by Nick A

[svyatoslav]

[🔨]   E: Unable to correct problems, you have held broken packages.
[💥] error! [ Failed to install host packages; make sure you have a sane sources.list.  ]
[💥] Cleaning up [ please wait for cleanups to finish ]
 

[svyatoslav]

может быть проблема в том, что я запускаю сборку на orange3.?

there is no other option, only orange pi3 with armbian installed.

Edited 51 minutes ago by svyatoslav

[Nick A]

You need a PC... it would probably take days to compile a build on a SBC. 

 

 

Edited 41 minutes ago by Nick A

[firepower]

@svyatoslav

https://forum.armbian.com/topic/29794-how-to-install-armbian-in-h618/page/20/#findComment-217879