How to install armbian in h618?

[kvvvp]

10/31/2025 в 10:28 AM, MeJune сказал:

I have installed additional IR remote and OpenVFD.

What kernel version are you using?

[MeJune]

@kvvvp Build from branch v20251014 (kernel 6.17.2)

[emor acid]

On 10/20/2025 at 5:10 PM, emor acid said:

hi, Compilation error, I also decompiled the dts available for Android for reference 

update armbian dts  ，Give to those in need

use sudo  armbian-add-overlay ***.dts

this dts can avaible  rtl8211f on h618 

 

 

 

 

/dts-v1/;
/plugin/;

/ {
    compatible = "allwinner,sun50i-h618";

    fragment@0 {
        target = <&mmc1>;
        __overlay__ {
            status = "disabled";
        };
    };

    fragment@1 {
        target = <&emac1>;
        __overlay__ {
            status = "disabled";
        };
    };

    fragment@2 {
        target = <&pio>;
        __overlay__ {
            x98h_rgmii_pins: x98h-rgmii-pins {
                pins = "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15";
                function = "emac0";
                drive-strength = <40>;
            };
        };
    };

    /* 3. 配置千兆网卡 */
    fragment@3 {
        target = <&emac0>;
        __overlay__ {
            pinctrl-names = "default";
            pinctrl-0 = <&x98h_rgmii_pins>;
            phy-mode = "rgmii"; 
            phy-handle = <&rgmii_phy>;
            phy-io-supply = <&reg_aldo1>;
            
           
            allwinner,tx-delay-ps = <700>;
            allwinner,rx-delay-ps = <3100>;
            
            status = "okay";

            mdio {
 

                rgmii_phy: ethernet-phy@1 {
                    compatible = "ethernet-phy-ieee802.3-c22";
                    reg = <1>;

                    reset-gpios = <&pio 8 16 1>; 
                    reset-assert-us = <30000>;
                    reset-deassert-us = <150000>;
                };
            };
        };
    };
};

[xdatravelbug]

@kil

I also own a T95H and playing around with that now. Would it be possible getting your final dts, dtb and .config for u-boot?

Thanks in advance & best regards

[kvvvp]

 Build from branch v20250306.

error! [ Failed to fetch SHA1 of 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git' 'tag' 'v6.12.11' - make sure it's correct  ]

How to remove the error?

[Nguyễn Lân]

Dear @Nick A

I used your rom "Armbian-unofficial_25.05.0-trunk_Vontar-h618_bookworm_edge_6.12.11_xfce_desktop.img.xz" date April.2025 to flash my box Vontar H618 which i checked inside the box that the chip marked "HK6334Q"
 

So far so good the Armbian running, however the wifi still doesnt work 

 

I read all around and aware that the HK6334Q chip will need the builded rom "Support AIC8800" to get wifi working 

 

Appreciate if you or someone else helping me to find way out for this wifi? And any recently builded rom support for both Alwinner H618 and HK6334Q (or AIC8800) drivers

 

Many thank in advance

 

[Nick A]

@Nguyễn Lân The HK6334Q Wi-Fi/BT chip uses the brcmfmac4334 firmware. If your Wi-Fi chip is detected by the kernel, the dmesg log will show the names of the .bin and .txt files it is looking for.

[Nick A]

@kvvvp I don't have any issues building from branch v20250306. Do you have docker installed? 

Edited 2 hours ago by Nick A