Nick A Posted March 27 Posted March 27 (edited) I can't tell you which u-boot image to use until I get more information. u-boot is in the images you write to your sdcard. If you want try all these images. https://github.com/NickAlilovic/build/releases/tag/20250306 The best way to know if it's booting is to install a usb serial ttl device to your uart. Then use a terminal software to view u-boot/kernel messages. sudo gtkterm -p /dev/ttyUSB0 -s 115200 Edited March 30 by Nick A 0 Quote
Nick A Posted March 29 Posted March 29 (edited) @Felps Try this image. If it boots I'll make you a Armbian image. https://github.com/warpme/miniarch/releases/download/gdde1069c/MiniArch-20240715-6.14.0-board-h616.tanix_tx6s_axp313-SD-Image.img.xz Edited March 29 by Nick A 0 Quote
Nick F Posted March 31 Posted March 31 @Nick A Is it possible to use those programs to install firmware on these TV boxes to install Linux? Like phoenixusbpro, phoeniscard or phoenixsuit? 0 Quote
Nick F Posted March 31 Posted March 31 @Nick A I tested the image you sent, but it remains a black screen. Does this black screen mean that the TV box is trying to read it, but is unable to do so, or is it something else? 0 Quote
Nick A Posted March 31 Posted March 31 it could be.. the only way to find out is to install one of these... https://www.amazon.ca/IZOKEE-CP2102-Converter-Adapter-Downloader/dp/B07D6LLX19/ref=sr_1_5?crid=AMXIJBW4D3ME&dib=eyJ2IjoiMSJ9.Co3Uo8H4Xww9Sh693R4fJMfx-ODJ6Y_QaEWUP4zIOtoNKGIlFEYRqP4C0KzSPBy8jVLpNByeON_vsk0APSGxvWfseX_G4ItSw4nYPFOw7JRUep64_8ajaRvPhlZcW2TtfcdGMgVoenpBc1oX9hNSzCRAGTOxxVvJGpdVcD1CARcRLg_kgv4aFLwG7eyCtWw0ONVKSXczzt3p10BL2002l1FxX9Ohu9XHD8R22zlKXJu4hincHMKrWIlhaaKPeSYlGVQ7-kIZVtLLiJEyAkrqX_8Z0X4vq1ymDhGfVa4AqsWhnR9HHUTJr1CImmApwUmGCCka59lDC2ENNOSp1aXal0_0bRN6roLH0scZIsYGS8-Jh-R458uQiirWrrawf_pteu8lV_QoPK6xc7NK_5iLBGsydnPyYU9CR92LtK-yP3rlLNhpfexFcgbU73riWwlE.hhyW78XT4oycGfmgiIAbSTrykfO7MEMG9CF1UjqKJ-k&dib_tag=se&keywords=usb+to+ttl+adapter&qid=1743443020&sprefix=usb+to+ttl%2Caps%2C101&sr=8-5 0 Quote
Nick F Posted March 31 Posted March 31 (edited) @Nick A And how use this for install linux? Edited March 31 by Felps 0 Quote
Nick F Posted March 31 Posted March 31 @Nick A A forced installation on the TV box? But isn't there a chance of a problem? 0 Quote
Nick A Posted March 31 Posted March 31 (edited) Sorry but I can't help any further without this device installed.. we are working blind right now. If it still boots Android then the box should be okay. There's always a risk when modifying a tv box. I haven't broken one yet. Edited March 31 by Nick A 0 Quote
Nick F Posted Tuesday at 06:58 PM Posted Tuesday at 06:58 PM @Nick AAfter a lot of searching I found an ISO that my TV box "accepts", by reading the card with it, but every time I try to install mini arch, instead of installing in the flash memory, it installs via the SD card and I want it to be in the TV box's memory, how can I solve this? 0 Quote
Nick A Posted Tuesday at 07:41 PM Posted Tuesday at 07:41 PM @Felps which image are you using exactly? 0 Quote
Nick F Posted Tuesday at 07:45 PM Posted Tuesday at 07:45 PM This https://github.com/warpme/miniarch/releases/download/gdde1069c/MiniArch-20240715-6.14.0-board-h313.x96_q_lpddr3_v1.3-SD-Image.img.xz 0 Quote
Nick A Posted Tuesday at 07:47 PM Posted Tuesday at 07:47 PM Try this Armbian image https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_X96q-lpddr3-v1-3_bookworm_edge_6.12.11_xfce_desktop.img.xz 0 Quote
Nick F Posted Wednesday at 04:43 PM Posted Wednesday at 04:43 PM (edited) Apparently it worked, but stay in sd card and no in flash memory @Nick A Edited Wednesday at 04:44 PM by Felps 0 Quote
Nick A Posted Wednesday at 05:22 PM Posted Wednesday at 05:22 PM (edited) @Felps you need to install it on emmc using armbian-config. Edited Wednesday at 07:13 PM by Nick A 0 Quote
Nick F Posted Wednesday at 05:32 PM Posted Wednesday at 05:32 PM Where can i find it the armbian-config? And what a do it when find this for install the linux in flash memory? @Nick A 0 Quote
Nick F Posted Friday at 07:10 PM Posted Friday at 07:10 PM When select the option of install the driver of wifi, return a message error: Invalid overlay_prefix sun50i_h616 @Nick A 0 Quote
Nick A Posted Friday at 07:50 PM Posted Friday at 07:50 PM (edited) I just saw your wifi chip in the picture. Unfortunately, this chip only has drivers for older kernel versions. You’ll need to use a usb wifi device or Ethernet. Edited Friday at 09:27 PM by Nick A 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.