TVBOX M4xq with ik316 EMCP 1.0

[Aleqssandro Farias]

Hi @Nick A, good afternoon!
Yes, I tested them — I tried all three ISOs you shared. I'm sending you the UART logs from two of them: the one you specifically asked me to test and the MiniArch one.

The one you asked me to try throws a DRAM error, while the MiniArch image actually boots — maybe because it’s configured for eMCP.

log_miniarch.txt log_armbian_unofficial.txt

Edited 17 hours ago by Aleqssandro Farias

[Nick A]

@Aleqssandro Farias your miniarch image says it’s using Tanix TX6s (axp313).  Try the armbian version. 
https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_Tanix-tx6s-axp313_bookworm_edge_6.12.11.img.xz

[Aleqssandro Farias]

Hi @Nick A,

This ISO you sent has the same UART log error as the previous one. Here's the log:

"

U-Boot SPL 2025.01-armbian-2025.01-S6d41-P7151-H8869-V98f7-Bb703-R448a-dirty (Apr 02 2025 - 21:19:05 -0400)
DRAM: testing 32-bit width, rank = 2
read calibration failed!
testing 32-bit width, rank = 1
read calibration failed!
testing 16-bit width, rank = 2
read calibration failed!
testing 16-bit width, rank = 1
read calibration failed!
This DRAM setup is currently not supported.

resetting ...

"

Right now, the only image that boots properly is the MiniArch one.