RSS Bot Posted June 9 Share Posted June 9 Description Helping @alexl83 with his OrangePi 5 Plus ๐ Support for this board with SPI image was added to U-Boot this january: https://github.com/u-boot/u-boot/commit/7c084fd51c0c52b24facdbcfeeaf2c70fba03406 Also add the latest DDR and BL31 blobs, this should fix issues like recently on the NanoPC T6. Marked as WIP to give room for testing. How Has This Been Tested? [x] Build success: ./compile.sh BOARD=orangepi5-plus BRANCH=edge RELEASE=trixie EXPERT=yes KERNEL_CONFIGURE=no BUILD_MINIMAL=no BUILD_DESKTOP=no uboot [ ] @alexl83 please test freshly built edge kernel image [ ] @alexl83 please test freshly built vendor kernel image (vendor u-boot should be applied) [ ] @alexl83 please test edge image on SD card while vendor U-Boot is installed in SPI (or wherever it lives when it comes from the factory) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article Link to comment Share on other sites More sharing options...
Recommended Posts