Armbian for H313 X96-Q LPDDR3 TV-Box

[Frank White]

Hi Nick,

I was able to burn the following image to my SD card and it booted up perfectly.  I have version 5.1 of the board.  The only problem I noticed is neither the wifi nor ethernet port were working.  Any tips?

Armbian-unofficial_25.05.0-trunk_X96q-ddr3-v5-1_noble_edge_6.12.11_xfce_desktop.img.xz

Edited Friday at 03:17 PM by Frank White

[Nick A]

Which wifi chip do you have? Can you upload your dmesg logs here?

[Frank White]

Here's my board.  I will get dmesg in a bit.  I guess it's the XR819 chip.
 

  

Edited Friday at 04:43 PM by Frank White

[Frank White]

dmesg.txt

[Nick A]

Can you extract your dts from your original android.

 

You directory structure might be different.

 

[Frank White]

4 hours ago, Nick A said:

Can you extract your dts from your original android.

 

Not sure I did this correctly but here's what I got.

dtb.0.dts

[Nick A]

Try this image

 

[Frank White]

8 hours ago, Nick A said:

Try this image

Everything seemed to work except sound.  Thanks for your help.  

My first impression is that while super cool, the hardware isn't up to the task of running a desktop OS.  I'm going to try out the server version and see how that does.  

[Frank White]

Off topic question but I don't suppose you could point me in the right direction to get openwrt installed on my device?

[Nick A]

Sorry I never played with openwrt on these boxes. 

 

I found this.. not sure how it works. But I see x96q-lpddr3. 

https://github.com/armarchindo/ULO-Builder

 

Edited Saturday at 06:00 PM by Nick A

[vok4us]

Hi.
In October 2024, I wrote that I had a problem installing Armbian on eMMC of the tv box.

I managed to solve this problem. Here's what you need to do:
1. Download the image from the link - https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_X96q-lpddr3-v1-3_bookworm_edge_6.12.11_xfce_desktop.img.xz
2. Burn the image to microSD using Rufus or BalenaEtcher
3. Insert the microSD and turn on the tv box
4. Install Armbian
5. Next, launch the terminal and enter sequentially: armbian-install -> Boot from eMMC - system on eMMC -> ext4 (waiting ~5-10 minutes)
6. Turn off the tv box and extract the microSD
7. Turn on the tv box (Wi-Fi is not working)
8. Next, launch the terminal and enter sequentially: armbian-config -> System -> Kernel -> SY210 - Manage device tree overlays
9. Turn off the tv box (waiting ~5-10 minutes)
10. Turn on the tv box (Wi-Fi is working)

 

Special thanks to @Nick A
Good luck to all!!!