Armbian for H313 X96-Q LPDDR3 TV-Box

[rafaeldavid]

1 hour ago, Nick A said:

It shouldn’t take that long.. did you try booting without the sdcard?

I tried, nothing happens, it stays on a black screen. 😪

[Nick A]

@rafaeldavid Try a different sdcard.

[rafaeldavid]

13 hours ago, Nick A said:

@rafaeldavid Try a different sdcard.

 

I tried, unfortunately the other one I have here at home doesn't recognize when I use it. To try another one, I'll have to buy a new one... =(

[Đỗ Quang Huy]

Hi,

 

I have an another version Box from H96 Max.
  https://www.h96tvbox.com/product/h96-max-h313-android-14-atv-tv-box/

Already install version X96Q V5.1 and almost worked except Wifi and Ethernet
Wifi chipset is AIC8800D40
 

What I need to do for enable wifi and Ethernet ? Do you have any suggestions 
 

[Nick A]

For Ethernet maybe this will fix your problem. 

 

The X98H also has the same wifi chip.

https://github.com/NickAlilovic/build/blob/v20250306/patch/kernel/archive/warpme-6.12/2001-arm64-dts-allwinner-h618-add-x98h.patch

+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	max-frequency = <35000000>;
+	status = "okay";
+
+	wlan: wifi@1 {
+		reg = <1>;
+	};
+};

 

[Đỗ Quang Huy]

@Nick A

Thank you so much. I build with x98h version, both Ethernet and Wifi worked.
Wifi only has problem when use command "reboot", wlan0 is disappear. But if I unplug power and plug again, then wifi is work again.