Armbian for H313 X96-Q LPDDR3 TV-Box

[rafaeldavid]

1 hour ago, Nick A said:

It shouldn’t take that long.. did you try booting without the sdcard?

I tried, nothing happens, it stays on a black screen. 😪

[Nick A]

@rafaeldavid Try a different sdcard.

[rafaeldavid]

13 hours ago, Nick A said:

@rafaeldavid Try a different sdcard.

 

I tried, unfortunately the other one I have here at home doesn't recognize when I use it. To try another one, I'll have to buy a new one... =(

[Đỗ Quang Huy]

Hi,

 

I have an another version Box from H96 Max.
  https://www.h96tvbox.com/product/h96-max-h313-android-14-atv-tv-box/

Already install version X96Q V5.1 and almost worked except Wifi and Ethernet
Wifi chipset is AIC8800D40
 

What I need to do for enable wifi and Ethernet ? Do you have any suggestions 
 

[Nick A]

For Ethernet maybe this will fix your problem. 

 

The X98H also has the same wifi chip.

https://github.com/NickAlilovic/build/blob/v20250306/patch/kernel/archive/warpme-6.12/2001-arm64-dts-allwinner-h618-add-x98h.patch

+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	max-frequency = <35000000>;
+	status = "okay";
+
+	wlan: wifi@1 {
+		reg = <1>;
+	};
+};

 

[Đỗ Quang Huy]

@Nick A

Thank you so much. I build with x98h version, both Ethernet and Wifi worked.
Wifi only has problem when use command "reboot", wlan0 is disappear. But if I unplug power and plug again, then wifi is work again.

[sicxnull]

Just checked in and am surprised this thread has gotten so much attention. Glad people have been able to use and modify the image as needed. Huge shoutout to @Nick A for all the support he's giving in here

 

[Nick A]

Glade to see you back @sicxnull. Thanks for the shoutout! Tried my best while you were gone. I don’t own one of these boxes. But I guess it doesn’t matter which one I get because theirs so many variations of the same box.

[Krayfish]

Hello, @sicxnull, Thanks for all your work on the H96X box.

I'm trying to install Armbian on my x96q V5.1, your image (Armbian-unofficial_24.11.0-trunk_X96q-v5-1_bookworm_current_6.6.44_mate_desktop.img.xz) works great apart from I'd really like a server instead of desktop. I'm just wanting to use it for a VPN (Tailscale) exit node.

Would it be hard to build a server version? I have no Linux experience.

 

[junji]

Notice, translation by ChatGPT.

Hi everyone!
I have an MX10 F3 TV stick running Android for a specific purpose, but I believe it could be more efficient with Armbian.

I'm testing Nick's image Armbian-unofficial_25.05.0-trunk_X96q-lpddr3-v1-3_bookworm_edge_6.12.11_xfce_desktop.img.xz on a microSD. It works well, except for Wi-Fi and Bluetooth — the chip is AIC8800.

I don’t know how to install the patch that has been shared. I also haven’t been able to make it work by installing the firmware and SDIO from https://github.com/geniuskidkanyi/aic8800

@Nick Aif you plan to release future versions, do you intend to include native support for the AIC8800 chip?

[Abay Kalenov]

@IronIgel  @ketzercat so, i also bought one of these have you launched somehow?

[rockamal]

@junji. Can you explain me how you proceed to boot this OS image Armbian-unofficial_25.05.0-trunk_X96q-lpddr3-v1-3_bookworm_edge_6.12.11_xfce_desktop.img.xz ?