Jump to content

MXQPRO 4K 5G fake S905 8GB +128GB real RK3128 1GB + 4GB


firepower

Recommended Posts

cpu: RK3128

ram: 4 x H5TQ2G43BFR  2Gbit (512M x 4) = 1GB

emmc: THGBMDG5  32Gbit = 4GB

Wifi: SV6158

heatsink also seemed fake, plastic, was not cool to touch like metal, removed to check cpu. cpu was not listed, but S905 was in photo. I claimed refund for counterfeit goods. I Expected it not to be S905, if it was a RK322X i would have kept it for armbian but RK3128 is worthless.

IMG_20240913_180428.thumb.jpg.567fac3e680bb9c94ea1bd702592be9d.jpg

IMG_20240913_150810.jpg

IMG_20240913_150749.jpg

 

IMG_20240913_155821.jpg

Edited by firepower
Link to comment
Share on other sites

DDR Version 2.06 20170316
In
1A1A1C1C   3
DDR3
282C1C1C   3
35351C1C   3
Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
mach:2
OUT
Boot1 Release Time: 2017-06-12, version: 2.40
ChipType = 0xa, 1384
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=3728MB
FwPartO�*V�k%���=0 20
StorageInit ok = 113376
SEC = 1
SecureInit 4 114844
Code check OK! theLoader 0x60000000, 168321
hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
�

U-Boot 2014.10-RK3128-06-g829baaa (Apr 19 2024 - 09:54:01)

CPU: rk3128
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 594000000HZ
    ddr pll = 600000000HZ
    codec pll = 400000000HZ
Board:  Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000060000000(0000000040000000)
128 MiB
GIC CPU mask = 0x00000001
rk dma pl330 version: 1.4
remotectl v0.1
pwm freq=0xb�*V�k%��� = 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from boot image.
power key: bank-0 pin-5
can't find dts node for fixed
No pmic detect.
power hold: bank-16777215 pin-255, active level-0
Secure Boot Mode: 0x1
SecureBootEn = 1, SecureBootLock = 1

#Boot ver: 2024-04-19#2.40
empty serial no.
normal boot.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
can't find power_ctr node for lcdc0
can't find dts node for deviceinfo
rk_hdmi_register:fail to read deviceinfo
Hdmi Devices Not Exist.
SCREEN_TVOUT
rk3036_tve_init:use default config g_tve_pos = 1
read logo on state from dts [1]
no fuel gauge found
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 1
kernel   @ 0x62000000 (0x0068db20)
ramdisk  @ 0x65bf0000 (0x00167f20)
bootrk: do_bootm_linux...
   Loading Device Tree to 65600000, end 65617398 ... OK
Add bank:0000000060000000, 0000000040000000

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.104 (txcz@txcz-host2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 19 09:45:47 CST 2024
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3128, model: rockchip,rk3128
[    0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x9dc00000, offset:0x00000000
[    0.000000] hdmi init vic is 1704292188
[    0.000000] cvbs init tve.format is 1
[    0.000000] cvbs init tve.format is 1
[    0.000000] cvbs init tve.format is 1
[    0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x9dc00000 for uboot logo
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(0) size(800000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 8 MiB at 9d400000
[    0.000000] ion_reserve: cma reserved base 9d400000 size 8388608
[    0.000000] cma: CMA: reserved 16 MiB at 7f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1672000 s13440 r8192 d15232 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261120
[    0.000000] Kernel command line: vmalloc=496M rockchip_jtag console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=disabled androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x00006000@0x00010000(kernel),0x00006000@0x00016000(boot),0x00010000@0x0001C000(recovery),0x00020000@0x0002C000(backup),0x00040000@0x0004C000(cache),0x00008000@0x0008C000(metadata),0x00002000@0x00094000(kpanic),0x00200000@0x00096000(system),0x00020000@0x00296000(radical_update),-@0x002B6000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x9dc00000 loader.timestamp=2024-04-19_09:54:01 hdmi.vic=1704292188 tve.format=1 SecureBootCheckOk=1
[    0.000000] rockchip jtag enabled
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 964088k/964088k available, 84488k reserved, 483328K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0bc6f5c   (12028 kB)
[    0.000000]       .init : 0xc0bc7000 - 0xc0c26480   ( 382 kB)
[    0.000000]       .data : 0xc0c28000 - 0xc0d0c3a0   ( 913 kB)
[    0.000000]        .bss : 0xc0d0c3a0 - 0xc0e2c95c   (1154 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

 

mxq_board.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines