Armbian for custom SKIPR on TwoTrees SK1

[Mechano]

Hi there!

I've tried your image on Two Trees SK1 3d printer, it has a custom OEM of the SKIPR card. 

There's  no HDMI so I can't see what happens. But putting an ethernet cable it doesn't get DHCP address. 
The card has also a wifi that I can't identify, not visible with lcpci or lsusb. 

I put a picture of the card and a schema.

[Mechano]

I want to say that during this days I've been able to install your Armbian distribution in this mainboard of TwoTrees SK1 printer.
I've lost the use of the stock serial display, but don't mind it's crappy and can change with other solutions.

I've found into the stock firmware this two files and followed your instructions to put .dtb file in the /boot partition. 

into .dts file I've found this line:
 

compatible = "firefly,roc-rk3328-cc\0rockchip,rk3328";

 

It seems compatible with this board: https://wiki.t-firefly.com/ROC-RK3328-CC/index.html

 

I'm waiting an Artillery Sidewinder X4 Plus, It has another SKIPR-derived board. I'll try same experiment there. 
 

rk3328-roc-cc.dtb rk3328-roc-cc.dts

[mali]

hi im newly into this klipper thing and i also have a sk1 printer that i would like to update and upgrade. if possible can you share the files i would like to inspect them end learn more about how this works.

 

thanks in advance