sugatam Posted March 21 Posted March 21 I updated my Rock-5b after a few months, but the latest edge kernel doesn't boot. Getting this on bootup: [ 38.709046] rockchip-pm-domain fd8d8000.power-management:power-controller: failed to get ack on domain 'gpu', val=0xaffff [ 38.710010] SError Interrupt on CPU5, code 0x00000000be000411 -- SError [ 38.710013] CPU: 5 UID: 0 PID: 449 Comm: (udev-worker) Tainted: G C 6.14.0-rc7-edge-rockchip64 #1 [ 38.710017] Tainted: [C]=CRAP [ 38.710018] Hardware name: Radxa ROCK 5B (DT) [ 38.710019] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 38.710021] pc : _raw_spin_lock_irqsave+0x38/0x8c [ 38.710027] lr : regmap_lock_spinlock+0x18/0x2c [ 38.710031] sp : ffff800085b4b650 [ 38.710032] x29: ffff800085b4b650 x28: ffff800082263538 x27: ffff80007a891558 [ 38.710035] x26: 0000000000000001 x25: ffff000100d7b080 x24: ffff000100d9b898 [ 38.710037] x23: 0000000000000000 x22: 0000000000000001 x21: 0000000000000000 [ 38.710039] x20: 000000000000000c x19: 0000000000000000 x18: 00000000ffffffff [ 38.710042] x17: 66203a72656c6c6f x16: 72746e6f632d7265 x15: 776f703a746e656d [ 38.710044] x14: 6567616e616d2d72 x13: 000000000000030d x12: 00000000ffffffea [ 38.710046] x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800082227770 [ 38.710048] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8 [ 38.710050] x5 : ffff800080adc9dc x4 : 0000000000000008 x3 : ffff800080adc450 [ 38.710052] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000100d9d400 [ 38.710055] Kernel panic - not syncing: Asynchronous SError Interrupt [ 38.710056] CPU: 5 UID: 0 PID: 449 Comm: (udev-worker) Tainted: G C 6.14.0-rc7-edge-rockchip64 #1 [ 38.710058] Tainted: [C]=CRAP [ 38.710059] Hardware name: Radxa ROCK 5B (DT) [ 38.710060] Call trace: [ 38.710062] show_stack+0x18/0x24 (C) [ 38.710066] dump_stack_lvl+0x38/0x90 [ 38.710069] dump_stack+0x18/0x24 [ 38.710071] panic+0x39c/0x3f4 [ 38.710075] nmi_panic+0x40/0x8c [ 38.710077] arm64_serror_panic+0x64/0x70 [ 38.710079] do_serror+0x3c/0x78 [ 38.710081] el1h_64_error_handler+0x30/0x48 [ 38.710085] el1h_64_error+0x6c/0x70 [ 38.710087] _raw_spin_lock_irqsave+0x38/0x8c (P) [ 38.710090] regmap_lock_spinlock+0x18/0x2c [ 38.710092] regmap_write+0x3c/0x78 [ 38.710095] rockchip_pd_power+0xf8/0x5e8 [ 38.710098] rockchip_pd_power_on+0x14/0x20 [ 38.710100] _genpd_power_on+0x98/0x18c [ 38.710103] genpd_power_on.part.0+0xa4/0x1ac [ 38.710106] __genpd_dev_pm_attach+0x1fc/0x304 [ 38.710108] genpd_dev_pm_attach+0x64/0x74 [ 38.710111] dev_pm_domain_attach+0x20/0x34 [ 38.710114] platform_probe+0x50/0xdc [ 38.710117] really_probe+0xc0/0x388 [ 38.710120] __driver_probe_device+0x7c/0x15c [ 38.710122] driver_probe_device+0x40/0x114 [ 38.710124] __driver_attach+0xf4/0x1fc [ 38.710126] bus_for_each_dev+0x74/0xd4 [ 38.710128] driver_attach+0x24/0x30 [ 38.710130] bus_add_driver+0x110/0x234 [ 38.710132] driver_register+0x60/0x128 [ 38.710135] __platform_driver_register+0x24/0x30 [ 38.710138] panthor_init+0x64/0x1000 [panthor] [ 38.710148] do_one_initcall+0x44/0x2a8 [ 38.710150] do_init_module+0x58/0x208 [ 38.710154] load_module+0x2000/0x20c0 [ 38.710156] init_module_from_file+0x84/0xc4 [ 38.710159] __arm64_sys_finit_module+0x1f4/0x2f8 [ 38.710161] invoke_syscall+0x48/0x110 [ 38.710164] el0_svc_common.constprop.0+0x40/0xe8 [ 38.710167] do_el0_svc+0x20/0x2c [ 38.710170] el0_svc+0x30/0xd0 [ 38.710173] el0t_64_sync_handler+0x144/0x168 [ 38.710176] el0t_64_sync+0x198/0x19c [ 38.710178] SMP: stopping secondary CPUs [ 38.710244] Kernel Offset: disabled [ 38.710245] CPU features: 0x380,00000070,00901250,8200720b [ 38.710247] Memory Limit: none [ 38.737861] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- Looks like this issue? https://patchwork.kernel.org/project/linux-rockchip/cover/20250220-rk3588-gpu-pwr-domain-regulator-v6-0-a4f9c24e5b81@kernel.org/ Are others are running into the same? Downgrading to kernel 6.12 works around this for the time being. 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.