[SOLVED] 100% /var/log usage & rsyslogd high CPU load

[ioncube]

My OS

OS: Armbian (24.8.4) aarch64 
Host: Radxa ZERO 3 
Kernel: 6.1.75-vendor-rk35xx 
Uptime: 5 mins 
Packages: 1358 (dpkg) 
Shell: bash 5.2.21 
Terminal: /dev/pts/0 
CPU: (4) @ 2.000GHz 
Memory: 1168MiB / 7686Mi

 

Reference Posts x2

 

I have this patch already in my /etc/systemd/journald.conf

I edited /etc/default/armbian-zram-config -> ZRAM_PERCENTAGE=10 but allotment size didn't increase after a reboot (~47M before as well). By default this variable was commented out

 

Filesystem                Size  Used Avail Use% Mounted on
tmpfs                     769M   24M  745M   4% /run
/dev/mmcblk1p2            116G   32G   84G  28% /
tmpfs                     3.8G  100K  3.8G   1% /dev/shm
tmpfs                     5.0M     0  5.0M   0% /run/lock
tmpfs                     3.8G  4.0K  3.8G   1% /tmp
/dev/md127                439G   65G  352G  16% /media/radxaRaid480gb
/dev/mmcblk1p1            256M  157M  100M  62% /boot
/dev/sdd1                 117G   37G   75G  34% /media/radxa128gb
/dev/zram1                 47M   46M     0 100% /var/log

 

 

 

Edited 11 hours ago by ioncube

[ioncube]

Solution found at