mxq pro 4k 5g allwinner h313 can't sd card boot

[Ducdanh Nguyen]

Hello @Nick A i did everything git cloned now im in setup,

heres what i choosed:

1. Do not change kernel configuration

And after that, i don't found any compactible for my h313

also note that mine firmware is based off d9 Pro 5g so i think it could use the same dram settings and wifi chip except for the cpu. Hope this helps!

[Ducdanh Nguyen]

I have identified the ram chip and nand, but don't know where wifi is, i think thats not very important since i have alot of usb wifi and ethernet

 

[Ducdanh Nguyen]

@Nick A heres the complete info : 

🧠 DRAM

Chip 1:

Marking: MPF694C4G-P

Maker: UniIC (UnilC)

Type: DDR3/DDR3L

Density: 4 Gb (512 MB)

Date code: 2021 (week 11)

Chip 2:

Marking: SBC13H4G150

Maker: UniIC (UnilC)

Type: DDR3/DDR3L

Density: 4 Gb (512 MB)

Date code: 2020 (week 11)

✅ Total RAM = 1 GB (2 × 512 MB)

💾 Storage (eMMC)

Chip:

Marking (line 1): NCEMAM60-08G

Maker: FORESEE

Type: eMMC Flash (not raw NAND)

Capacity: 8 GB

Marking (line 2): 000

Serial/Batch: Z1S1801147073

Date code: 1802 → Year 2018, Week 02

✅ Total storage = 8 GB eMMC (manufactured early 2018)

[Nick A]

@Ducdanh Nguyen you forgot these steps 

choose "Show CSC/WIP/EOS/TVB"

choose "I understand and agree"
 

you should see a few x96q in the list.