Hongtop H20PRO Android TV Box 16GB H616

[Piotr s]

Aliexpress item:

https://pl.aliexpress.com/item/1005006249858881.html

 

Extracted dtb and dts files attached.

 

It boots Warpme/miniarch image for X96 with LPDDR3 RAM

https://github.com/warpme/miniarch/releases/download/f3b14fbae071/MiniArch-20240715-6.16.1-board-h313.x96_q_lpddr3-SD-Image.img.xz

 

However internal Ethernet port is silent. It can work through USB->ETH adapter though.

 

Any Idea on how to make Ethernet working?

sun50.dtb sun50.dts

[Nick A]

@Piotr sTry this image https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_X96q-lpddr3_bookworm_edge_6.12.11_xfce_desktop.img.xz

 

to fix Ethernet you need to edit this file https://github.com/NickAlilovic/build/blob/v20250306/patch/u-boot/u-boot-h616/159-add-x96-q-lpddr3-v1.3-defconfig.patch. Change 16 to 0. Then compile a new image.

+&mdio1 {
+	rmii_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};

more information can be found here 

 

 

 

Edited 16 hours ago by Nick A

[Piotr s]

Unfortunately boot stops at 'Starting kernel' . However LED inside is pulsing, so it may be possible that only console stream is corrupt.

 

U-Boot 2025.01-armbian-2025.01-S6d41-P7151-H8869-V004f-Bb703-R448a-dirty (Apr 02 2025 - 21:10:39 -0400) Allwinner Technology

CPU:   Allwinner H616 (SUN50I)
Model: hechuang,x96-q LPDDR3
DRAM:  1 GiB
Core:  58 devices, 20 uclasses, devicetree: separate
WDT:   Not starting watchdog@30090a0
MMC:   mmc@4020000: 0, mmc@4021000: 3, mmc@4022000: 1
Loading Environment from FAT... Unable to use mmc 0:1...
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
No USB device found
Net:   apply fix for AC300 ephy bb version bug ...
using AC300 emac1 ephy default config ...
eth0: ethernet@5030000
starting USB...
No USB controllers found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
4641 bytes read in 2 ms (2.2 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
202 bytes read in 2 ms (98.6 KiB/s)
Load fdt: /boot/dtb/allwinner/sun50i-h313-x96-q-lpddr3.dtb
37577 bytes read in 5 ms (7.2 MiB/s)
Working FDT set to 4fa00000
Failed to load '/boot/dtb/allwinner/overlay/sun50i-h616-fixup.scr'
15484849 bytes read in 649 ms (22.8 MiB/s)
42621440 bytes read in 1781 ms (22.8 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=0x42b50000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    15484785 Bytes = 14.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
Working FDT set to 4fa00000
   Loading Ramdisk to 4913b000, end 49fff771 ... OK
   Loading Device Tree to 00000000490c9000, end 000000004913afff ... OK
Working FDT set to 490c9000

Starting kernel ...

[Nick A]

 @Piotr s im using the same warpme patches so it’s odd that it doesn’t boot. To show more information on your console screen change your loglevel to 7 in armbianEnv.txt. The file is located at the root directory of your sdcard.