T9 TvBox Sunwell - Pcb Label T9-RK3328-8x4-V1.8

[GmP]

TV Box Status Information Template Version 1.0

TV Box Name (example: TX3 mini): T9

CPU (example: amlogic s905w): RK3328

Armbian build file name: Armbian_community_25.11.0-trunk.367_Rk3318-box_trixie_current_6.12.54_minimal.img

DTB file used: rockchip/rk3318-box.dtb

Kernel Version: 6.12.56-current-rockchip64

Distribution Installed (focal, buster, etc): trixie

Working Ethernet (Yes/No):Yes

Max Ethernet Speed that works (100/1000): 100 Max

Does wifi work (Yes/No): Yes 2/5

Does bluetooth work (Yes/No): Yes

Does HDMI audio work (Yes/No): Yes - after last update , (also analog and spdif ports are available - not tested).

Additional Comments (provide any additional information you feel is important): IR Receiver yes

5 Digit display working: yes

MASKROM PINS for recovery flashing available on the back side.

SOC RK3328

RAM 4Gx4 D9PQL

VFD DRIVER FD6551

WLAN CHIP SP6330

32 GB EMMc KLMBG2JENB

VT RT9045

vfd.conf rk3318-t9.dtso Log android gpio T9.txt

Edited November 2, 2025 by GmP
update

[Константин Кривбасс]

Hello! I see you installed the 3318 image on the T9 and everything works fine. Congratulations! I'm not a big Linux expert, but I'd like to make a server out of it. I have the same console, but I'm afraid I can't handle it. I couldn't even find the best image for it...could you share your image for it?

[GmP]

https://github.com/armbian/community/releases/download/26.2.0-trunk.385/Armbian_community_26.2.0-trunk.385_Rk3318-box_trixie_current_6.18.8_minimal.img.xz

this is the latest console build compatible with T9. You will need to configure a little bit the environment after booting to enable all the features via ssh and wired lan.

If the device is still on android the best is to follow the tutorial from @jock in