Unable to install Armbian on Arduino Uno Q (2 GB)

[lyevod79]

Hey there,

I try to install Armbian on my Arduino UNO Q (2 GB), but it fails with all three images

• Armbian_community_26.2.0-trunk.703_Arduino-uno-q_trixie_edge_6.19.0_minimal.tar.xz
• Armbian_community_26.2.0-trunk.703_Arduino-uno-q_noble_edge_6.19.0_gnome_desktop.tar.xz
• Armbian_community_26.2.0-trunk.703_Arduino-uno-q_noble_edge_6.19.0_kde-neon_desktop.tar.xz

The error message:

.\arduino-flasher-cli.exe flash .\Armbian_community_26.2.0-trunk.703_Arduino-uno-q_trixie_edge_6.19.0_minimal.tar.xz

WARNING: flashing a new Linux image will erase any existing data that you have on the board.

Do you want to proceed and flash .\Armbian_community_26.2.0-trunk.703_Arduino-uno-q_trixie_edge_6.19.0_minimal.tar.xz on the board? (yes/no)
yes
Unzipping Debian image
arduino-images/
arduino-images/disk-sdcard.img.esp
arduino-images/disk-sdcard.img.root
arduino-images/flash/
arduino-images/flash/imagefv.elf
arduino-images/flash/zeros_1sector.bin
arduino-images/flash/multi_image.mbn
arduino-images/flash/gpt_main0.bin
arduino-images/flash/gpt_backup2.bin
arduino-images/flash/featenabler.mbn
arduino-images/flash/boot.img
arduino-images/flash/prog_firehose_ddr.elf
arduino-images/flash/tz.mbn
arduino-images/flash/xbl.elf
arduino-images/flash/rawprogram0.xml
arduino-images/flash/gpt_both0.bin
arduino-images/flash/gpt_empty0.bin
arduino-images/flash/gpt_backup1.bin
arduino-images/flash/xbl_feature_config.elf
arduino-images/flash/rawprogram0.nouser.xml
arduino-images/flash/gpt_main2.bin
arduino-images/flash/km4.mbn
arduino-images/flash/gpt_backup0.bin
arduino-images/flash/zeros_33sectors.bin
arduino-images/flash/gpt_main1.bin
arduino-images/flash/abl.elf
arduino-images/flash/rpm.mbn
arduino-images/flash/storsec.mbn
arduino-images/flash/devcfg.mbn
arduino-images/flash/cdt.bin
arduino-images/flash/hyp.mbn
arduino-images/flash/qupv3fw.elf
arduino-images/flash/patch0.xml
arduino-images/flash/uefi_sec.mbn
panic: runtime error: index out of range [0] with length 0

goroutine 1 [running]:
github.com/arduino/arduino-flasher-cli/internal/updater.Flash({0x7ff7f72e8c08, 0xc0000e9e50}, 0xc000288130, {0xc0000a8060, 0x54}, 0x1?, 0x0, {0x0, 0x0}, 0x0)
        D:/a/arduino-flasher-cli/arduino-flasher-cli/internal/updater/flasher.go:95 +0x757
github.com/arduino/arduino-flasher-cli/cmd/arduino-flasher-cli/flash.runFlashCommand({0x7ff7f72e8c08, 0xc0000e9e50}, {0xc000288110, 0x1?, 0x1?}, 0x0, 0x0, {0x0, 0x0})
        D:/a/arduino-flasher-cli/arduino-flasher-cli/cmd/arduino-flasher-cli/flash/flash.go:117 +0x349
github.com/arduino/arduino-flasher-cli/cmd/arduino-flasher-cli/flash.NewFlashCmd.func1(0xc00002c908, {0xc000288110, 0x1, 0x1})
        D:/a/arduino-flasher-cli/arduino-flasher-cli/cmd/arduino-flasher-cli/flash/flash.go:74 +0x94
github.com/spf13/cobra.(*Command).execute(0xc00002c908, {0xc0002880e0, 0x1, 0x1})
        C:/Users/runneradmin/go/pkg/mod/github.com/spf13/cobra@v1.9.1/command.go:1019 +0xae7
github.com/spf13/cobra.(*Command).ExecuteC(0xc00002c608)
        C:/Users/runneradmin/go/pkg/mod/github.com/spf13/cobra@v1.9.1/command.go:1148 +0x465
github.com/spf13/cobra.(*Command).Execute(...)
        C:/Users/runneradmin/go/pkg/mod/github.com/spf13/cobra@v1.9.1/command.go:1071
github.com/spf13/cobra.(*Command).ExecuteContext(...)
        C:/Users/runneradmin/go/pkg/mod/github.com/spf13/cobra@v1.9.1/command.go:1064
main.main()
        D:/a/arduino-flasher-cli/arduino-flasher-cli/cmd/arduino-flasher-cli/main.go:71 +0x3f0

.\arduino-flasher-cli.exe flash latest works as expected, so it seems to be an issue with these images. Or do I use the wrong installation method?

The problem is reproducible under Windows 11 and Linux.

 

Installation over Armbian Imager also fails

• https://paste.armbian.com/fowidugipo
• https://paste.armbian.com/ogekaqalaq