[CNX-Software] - Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating

Seeed Studio XIAO STM32C5 is the company’s first XIAO development board based on an STMicroelectronics MCU, namely a 144 MHz STM32C5A3CG Arm Cortex-M33 microcontroller. It features two CAN FD controllers and a 6-axis IMU with programmable heating for robotics, industrial control, and motion-sensing applications. The board also includes 16MB of external flash, a 48 MHz external crystal, a USB-C port, and battery charging circuitry. One CAN FD channel is connected to an onboard transceiver, while the second requires an external transceiver. The integrated IMU heater allows firmware to control sensor temperature and reduce measurement drift from temperature changes. XIAO STM32C5 specifications: MCU – STMicroelectronics STM32C5A3CG CPU – 144 MHz Arm Cortex-M33 with FPU and DSP instructions Memory – 256KB SRAM Storage – 1MB internal flash Storage – 16MB external flash USB – USB Type-C port with USB 2.0 Full-Speed support (12 Mbps) CAN Bus 2x CAN FD controllers (FDCAN1 and [...]

The post Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating appeared first on CNX Software - Embedded Systems News.

View the full article