Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anyone here running a home EV charger on a small SBC monitoring setup?

Featured Replies

I drive a 2022 Chevy Bolt EUV and charge at home overnight in Indianapolis. I'm looking at a Level 2 wall unit for the garage, and before I pick one I want to keep an eye on charging sessions from something small like a Raspberry Pi running Armbian rather than a cloud app.

The part I'm unsure about is how much telemetry these units actually expose. Some look like they only talk to a vendor app, and the ones with local APIs are the ones I'd want. I don't want to commit to a unit and find out later that I can't pull anything locally.

For those of you who charge at home and tinker with SBCs, did you check API or local access before buying? Any pitfalls with Wi-Fi dropouts or software updates breaking things? Would appreciate hearing what worked for you.

Update after digging around more - Best EV chargers of 2026 https://ratethepick.com/category/ev-chargers kept coming up while I was comparing units. Still not sure how many of those actually expose a local API worth using with a Pi, but I'm leaning toward checking that before I commit to one.

Edited by alexander_lewis

13 hours ago, alexander_lewis said:

The part I'm unsure about is how much telemetry these units actually expose.

I also do not know this, but what I do for older solar inverters is using my own power measurement modules. The inverters themselves have no I/O for telemetry (can buy as option though), only a simple pixels based display that shows some stats. So it is a matter of (bi-directional) power measurement. I use commercial modules (Sonoff, Shelly) but put Tasmota on those. Tasmota has plenty of options for telemetry I/O, like MQTT, or direct push in to InfluxDB for example. Those ESP based modules are WiFi only, so I had to take some measures w.r.t. WiFi networking/AccesPoints, but still less work than something wired as that also requires full isolation and still will then be destroyed by lightning for example. I assume you don't want to use the SBC for it's 40-pin header (GPIO's, busses), but just just its IP networking, HID (display, etc) and power supply. Or what shall the SBC/Armbian do?

Anyway, I am in EU, it is also a matter of connectors and power specifications. So I am only familiar with 230V AC single phase and 400V AC 3-phase. Also the charging is in your car, not in the boxes shown on that ratepick website. Also 'best' might be not best for you but best for Amazon etc and as you (I think) expect, for all those cloud apps and owners trying to benefit from all sorts of stats/data regarding the power flowing from the grid to your car. So they can sell that info to electricity company so then they can raise the price per kWh at night etc. And know when you are at home (or not).

So before buying, try to analyze what is actually inside in a more fundamental way. Like that a 'solar invertor' is indeed doing conversion ('invert') from DC to AC, but way more important is the algorithms handling the reality of clouds passing by and simply the complexity of PV cells characteristics.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.