dilligaf
Members-
Posts
19 -
Joined
-
Last visited
-
@arm_work2 Good work!)
-
Thanks a lot for help @balbes150, @mdel! After many reboot I create user, and perform the initial setup. Now i got shell, and test the system. But still no video output Огромное ÑпаÑибо за помощь! Ð’Ñ‹ проделали очень хорошую работу!
-
It's looks like box autoreboot while perform the initial setup. Is there any way to stop it?
-
Something strange happend while i logon: I changed root password, then system reboot. Now system reboot, after log in.
-
Thanks! Seems to it boot succsesfuly! Here is a log: https://yadi.sk/d/GvAeglLYwQWDT But i don't get hdmi output. PS Also, what is default login/password? root/odroid does not work.
-
Here we are: printenv:
-
Ok, i catch it. 1) fatload usb 0 0x21000000 uImage m8b_m201_1G#usb start (Re)start USB(0)... USB0: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: Highspeed device found ! scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found m8b_m201_1G#fatload usb 0 0x21000000 uImage reading uImage Enter Exception:0x00000004 link addr:0x1ff24954 2) fatload usb 0x0 0x21000000 uImage m8b_m201_1G#usb start (Re)start USB(0)... USB0: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: Highspeed device found ! scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found m8b_m201_1G#fatload usb 0x0 0x21000000 uImage reading uImage Enter Exception:0x00000004 link addr:0x1ff24954 3) help fatload m8b_m201_1G#help fatload fatload - load binary file from a dos filesystem Usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes] - load binary file 'filename' from 'dev' on 'interface' to address 'addr' from dos filesystem 4) help minicom.log
-
Can't stop boot on u-boot thru UART or USB keyboard. Is there a special hotkey? Загрузку прервать не получаетÑÑ Ð½Ð¸ через UART, ни через подключенную usb клавиатуру. Ð’ терминале отображаетÑÑ Ñхо, пробовал отправлÑÑ‚ÑŒ брÑйки, но не реагирует. ЕÑÑ‚ÑŒ какаÑ-то ÑÐ¿ÐµÑ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ ÐºÐ¾Ð¼Ð°Ð½Ð´Ð°?
-
I overwrite it on boot partition of linux sd/usb drive, right? Seems to the same exception apear. reading s805_autoscript 855 bytes read ## Executing script at 11000000 MMC: block number 0x1 exceeds max(0x0) ** Can't read from device 0 ** ** Unable to use mmc 0:1 for fatload ** reading uInitrd Enter Exception:0x00000004 link addr:0x1ff24954 Boot from sd with s805/mxq dtb.img: https://yadi.sk/d/ebPkKQiWwLWns Boot from usb with s805/mxq dtb.img: https://yadi.sk/d/8EJDmeeIwLYB2
-
Thanks. Hope our work will be helpfull
-
So, what i've got from UART: Default Android boot: here Try to boot from SD card: here UPD: Also add boot from USB: here And try to boot USB with MXQ dtb.img from balbes150 : log UPD: Everywhere the same exception. AND LAST: Booting AlexELEC UART log Booting corret with the same sd card.
-
Yes, i try all dtb files from this folder. I'll try to connect serial console to my box, to capture boot log, but i think my problem the same as @mdel. P.S. may be you got im(on mysku, for example), i may write you in russian.
-
Correct. I try to start system from SD. It does not boot. Then I burn image to external usb flash and it also does not boot. There are no messages on screen, only logo MXQ for 5 sec. and then reboot in cycle. For my dtb.img from @mdel i create new boot SD card(16gb micro sd). Burn Armbian_5.20_Vegas805_Ubuntu_xenial_3.10.102_20160923 with rufus, then paste dtb.img to root directory of created SDcard's boot partition. But i also got bootloop...
-
@mdel Thanks a lot! Renamed dilligaf-boot.img-second.gz to dtb.img, burn Armbian_5.20_Vegas805_Ubuntu_xenial_3.10.102_20160923 to SDcard one more time, paste dtb.img to root directory of boot partition... Sad, but i got bootloop again. I think it's kernel panik, as you got. Do you use serial connection to check boot logs?
-
@mdel So, I check my box: 1) strings /dev/block/env: multiboot seems to exist in my /dev/nand_env: https://yadi.sk/i/BnYRrmOkw7RVk 2) I capture my boot.img blob: https://yadi.sk/d/RoEp4iTSw7RVY. What next? I need to extract dtb file? @balbes150 I use another sd card to create linux bootdisk. I try 16g sd card and 16gb usb flash. Box start normaly, display first splash screen, and then, when start reeading flash drive, reboot. I use my pc hdmi monitor with box. I have link for AlexELEC linux img for my box: https://yadi.sk/d/LmcDKKy3w7UKy Also my box described here: http://mysku.ru/blog/china-stores/41504.html I don't have firmware archive, but may extract it from box, if it need?