Igor,
Thanks for the response and suggestions. I followed them but still have problems getting this to work.
As suggested, I ran "modprobe brcmfmac" which loaded the module and added brcmfmac to /etc/modules.
lsmod returns:
lsmod
Module Size Used by
cpufreq_conservative 4923 0
cpufreq_powersave 876 0
cpufreq_stats 2759 0
cpufreq_userspace 1289 0
bluetooth 231349 0
dm_crypt 13513 1
af_alg 3898 0
nfsd 170855 2
dm_mod 65376 2 dm_crypt
sg 17563 0
uas 9794 0
caam_jr 12324 0
imx_ipu_v3 33796 0
caam 5963 0
brcmfmac 154271 0
brcmutil 3997 1 brcmfmac
cfg80211 157970 1 brcmfmac
rfkill 12201 2 cfg80211,bluetooth
I edited the /etc/network/interfaces to "enavble" wlan0 but ifup still returns the following error and wifi is not working:
ifup wlan0
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Failed to bring up wlan0.
/etc/network/interfaces looks like this:
cat /etc/network/interfaces
# Wired adapter #1
auto eth0
iface eth0 inet dhcp
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
#
# Wired adapter #2
#auto eth1
# iface eth1 inet dhcp
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
#
# Wireless adapter #1
auto wlan0
iface wlan0 inet dhcp
# wpa-ssid SSID
# wpa-psk xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
wpa-ssid sketch-wlan
wpa-psk 1ea89bd2335623e66f19bc5b4fbfe810a8207913894d3f010778693720fe69f7
# to generate proper encrypted key: wpa_passphrase yourSSID yourpassword
#
# Local loopback
auto lo
iface lo inet loopback
dmesg | grep brcm returns
[ 1.033321] brcm_reg: disabling
Can you give me any further suggestions?
Thanks