[NanoPC T4]

Hi all. Tell me please. How to get a uinitrd from a initrd.img?

[MALI T860 , has anyone successfully installed Panfrost on an RK3399 board ?]

Hi.

Why is the 2d drawing in X11 so slow? If you use mali blobs, the scrolling in the Windows is delayed, moving the Windows is done with jerks. Even when display compositing is enabled, you can see how the under level Windows are redrawn in parts. If you do not use mali blobs, the scrolling in the Windows is excellent. But the Windows move slowly. When the compositing is disabled, the window can reach several (5-7) seconds. One would think that the graphics accelerator and processor are slow. But I have experience using weaker devices (e.g. tegra k1 or exynos with mali t6xx). There such delays are not observed even in the mode without hardware acceleration.

[NanoPC T4]

16 hours ago, TonyMac32 said:

For RTC?  Yes, that can work. 

In WIKI the supply voltage is not specified. I had doubts.

[NanoPC T4]

23 hours ago, martinayotte said:

Battery for what ? For the whole board ? ... CR2032, you're kidding ...

Sorry, for RTC, of course.

[NanoPC T4]

Hi.

Recommend what battery CMOS can be used?
For example, cr2032 will normally work?