Jump to content

lemonahmas

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by lemonahmas

  1. Seems like it won't boot and stucks at: INFO: PMIC: DRAM voltage: 1.50V INFO: Continiously reboot. Can't understand why. Any advice?
  2. hi there,the 4.19 kernel on win plus is great to play with but it really takes hours to boot. it stucks at starting kernel step. any advice?
  3. Hi everybody, burned the latest armbian for opi prime since I got the board, and the greed led is working, but after all I cannot find it with “arp -a” and the ethernet led is flash, both color. Anyone have the idea? I don't have a screen or tv even a router here course I am at university. So I directly connected my computer with the board. Don't think anything is wrong.
  4. Hi, I am using blinkt on win plus, but seems like there are no python GPIO library suits it. Anybody have an idea?
  5. As the link below. http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=382617850793&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111
  6. Such a GREAT job! And if it works I will compile another version for my orangepi win plus.
  7. and...this build won't work too, as my board is orangepi win plus. sad, the DT do need some help. Linux orangepiwin 3.10.107-pine64 #33 SMP PREEMPT Wed Sep 19 13:03:51 CEST 2018 aarch64 aarch64 aarch64 GNU/Linux
  8. Thank you for ur reply, And I tried this it worked: rmmod bcmdhd modprobe bcmdhd op_mode=2 AP6212 can only work in client mode or AP mode, it needs to be manualy changed. However, after reboot it won't work, so I guess I have to figure out how to keep this state.
  9. Hi everyone viewing this post, here is the situation. I think I have configured my hostapd correctly, but I cannot find the ssid(I haven't hidden it), and I cannot even join mannualy. there is no fatal error in the log so I don't know what to do. PLEASE HELP. THANK ALL OF YOU VERY MUCH. -----here is the log----- -----here is /etc/hostapd.conf----- # # armbian hostapd configuration example # # nl80211 mode # ssid=ARMBIAN interface=wlan0 hw_mode=g channel=9 #bridge=br0 driver=nl80211 ignore_broadcast_ssid=0 # 是否广播,0 广播 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 noscan=1 ## IEEE 802.11n ieee80211n=1 ht_capab=[DSSS_CK-40][HT20+] country_code=CH ieee80211d=1 ## IEEE 802.11n ### IEEE 802.11a #hw_mode=a ### IEEE 802.11a ### IEEE 802.11ac #ieee80211ac=1 #vht_capab=[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP3] #vht_oper_chwidth=1 #vht_oper_centr_freq_seg0_idx=42 ### IEEE 802.11ac # controlling enabled ctrl_interface=/var/run/hostapd ctrl_interface_group=0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines