Jump to content

function1983

Members
  • Posts

    1
  • Joined

  • Last visited

  1. I hope this will help other people. I have T95z Plus 3GB/32GB model. - First I tested with Armbian_5.60_Aml-s9xxx_Ubuntu_bionic_default_4.18.7_20180928: (good) It would boot right up, screen is showing (bad) no USB is not recognized (usb keyboard nor usb mini keyboard+mouse combo). No ethernet either. I tried several dtb files without luck. - Then I tried: Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_server_20171226 which works really well: (good) Screen shows, keyboard input ok without having to add/change dtb file. (bad) Ethernet is unstable. By which I mean you can ping the device somewhat, but really unstable. You cannot ssh, it will just hang until you give up. The reason for this is it doesn't accept gigabit ethernet, you need to switch it to 100Mbps connection mode, which is a turn off for some people. To do this, you just have to put in the command: "sudo ethtool -s eth0 speed 100 duplex full" and ethernet is stable again. You can ssh from this point on. I really hope this help other people save several hours (like I did) trying to figure out how to install armbian on this device. Have fun.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines