some4

Just wanted give some closure and follow-up on this issue: it was traced to bad RAM modules. Tested ok on different Orange Pi Primes.

I'm using a PSP, 5V 2A power supply and a Samsung 32GB card. I hit ctrl+c to copy error and i got past now I'm getting: [ 74.002120] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000008 [ 74.004751] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 74.010899] Mem abort info: [ 74.016811] ESR = 0x96000044 [ 74.019604] rcu: 3-...!: (1 GPs behind) idle=ffa/1/0x4000000000000000 sof tirq=357/364 fqs=20 [ 74.022646] Exception class = DABT (current EL), IL = 32 bits [ 74.031238] rcu: [ 74.037142] SET = 0, FnV = 0 [ 74.037148] (detected by 0, t=17447 jiffies, g=-799, q=296) [ 74.039152] EA = 0, S1PTW = 0 [ 74.042199] Task dump for CPU 3: [ 74.047757] Data abort info: [ 74.050890] udevadm

I've gotten further and it's now hanging at: starting version 232 [ 4.097575] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.102246] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.105195] random: systemd-udevd: uninitialized urandom read (16 bytes read) I get this error with the current Armbian images in the Downloads page. I'll do some more digging regarding this error when time permits. Thank you @martinayotte

Hello, I've built the DEV image/kernel for an Orange Pi Prime. On HDMI I see U-boot and the Armbian logo come up but I get "No signal" on the display after "Starting Kernel ..." I purchased a USB to TLL converter and observe the same symptom over the serial connection. I've written Armbian_5.67_Orangepiprime_Debian_stretch_dev_4.19.12.img using Etcher to a 32gb Samsung Evo Plus microsd. The board itself shows a steady green light. I'm new to the ARM world; so if I could get past this hurdle I'd be happy to maintain the Orange Pi Prime image. Thank you for all your work