• Content Count

  • Joined

  • Last visited

About Liontek1985

  • Rank

Profile Information

  • Gender
  • Location
  1. hello guys, i have buy on aliexpress a sunvell r69 1gb ram/8gb nand and can´t run armbian on it = blackscreen no display screen with armbian on sdcard, android works. i have check it and the box has lpddr2 ram... not ddr3 is it possible to run armbian on it? best regards fredy
  2. Liontek1985


  3. thx for your answere i have readed that i need a fex file for legacy kernel me spend many time to find out the right settings in fex and now i have a workes fex file with all features! On my board i have on ram and soc good heatsinks with Thermal Grease (CM IC Essential E1) and a pi-fan with the new fex run it @ 40-45°c on fire the cpu speed issue is fixed, now change the board the speed form 408Mhz up to 1200Mhz, tested with many PSP, PSX and Dreamcast games without issues or hang ups the performance is like a orange pi pc himself is the nerd
  4. Hello Guys can anyone help me please to integrate the "sun8i-h3-libretech-all-h3-cc.dtb/dts" on Retrorangepi 4.2 (legacy) or to fix the problem? i have tested with many options in script.bin/fex, I used as a base the orangepipc bin/fex without result
  5. very helpful... i dont need official support, i need help from user to user that's what makes a good community
  6. Hello and thx for answer i have readed and now my Board run on Armbian Jessie (Retrorangepi 4.2) the problem what iam have the board run only on 408MHz in idle and on fire.... i have check the system settings, here is more than 408 allowed... i have tested with user_overlays in armbianEnv.txt without result sun8i-h3-libretech-all-h3-cc.dts in /boot/overlay-user/ directory armbianEnv.txt the "sun8i-h3-libretech-all-h3-cc.dtb/dts" file has a speed table up to 1368Mhz can anyone help me to fix the problem please best regards fredy
  7. Hello guys i have bought a Tritium H3 and iam search a option to setting the cpu/gpu/ddr clock for armbian give it a script.bin (like orange pi) for this board to configure or an other option? please help me best regards fredy