user89235

So I just download all images in your UBOOT folder and rename them to uboot.img (and try them, one by one)? That didn't work, if I did everything correctly :/

Unfortunately, I've already bought/received the A64 TV Box. I tried to run your Armbian builds, however it doesn't even try to boot from the SD Card, instead of that it instantly boots Android. I tried to force a boot from the SD using "adb reboot update", which didn't work... Is there any way I can force the TV Box to boot from the SD Card? :/ I can access the recovery/bootloader through ADB, however I cant select that it should boot from SD, since it's only looking for a .zip update file. Edit: Using the toothpick method (by pushing down a little button in the AV port) loads a special custom recovery (?) which erases the user data, reinstalles Kodi and then reboots, I can't select anything else. The manifacturing company provides the original .img file ( "mxq_rk3328_d4_B_rtl8822_k11_20171221_r1(A64 显示kodi18.0).img" ), however the installation instructions are poorly translated. Putting a random update.zip on a flash drive (to trigger the update process, like I've done it with old S805 boxes) just opens a window, which says "error - not a valid update package". Edit #2: I've tried using the newest RockChip Batch Tool (which isn't in Chinese, thanks god) with the .img file, the original Android image gets accepted, but unluckily it doesn't accept the Armbian image ("ERROR - Load Firmware Failed").

Has anyone tried using Armbian with the A64 TV Box? It's one of the few Gigabit RK3328 TV boxes, most RK3328 have only 100M Ethernet, which makes them unsuitable for my use case :/ https://www.geekbuying.com/item/A64-KODI-18-0-Android-7-1-2-RK3328-4GB-64GB-TV-Box-402483.html