renedis

Members
  • Content Count

    16
  • Joined

  • Last visited

 Content Type 

Forums

Member Map

Store

Crowdfunding

Raffles

Applications

Everything posted by renedis

  1. You need to change the DTB file to version 5.88.190601 - 5.1.5 Located on the SD card: /boot/dtb-5.1.7-sunxi64/allwinner/sun50i-h6-orangepi-3.dtb That fixed it for me on 5.88 dev 5.17. Version linux-dtb-dev-sunxi64 version 5.90.190630 should work too, but I've not tested it. Check post:
  2. You guys are making it your self pretty hard
  3. Thanks mate for taking the time and effort!
  4. If I convert DTB to DTS (and back) and add this: /* There's the BT part of the AP6256 connected to that UART */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm4345c5"; clocks = <&rtc 1>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ max-speed = <1500000>; }; }; And copy https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 to: /lib/firmware/brcm/(BCM4345C5.hcd) Am I correct that it will it work then? (I'm using a OPi3)
  5. Thanks, I don't know how to do that and I'm not a "dts/dtb expert". Is there any guide on how to get this going? (not just bluetooth, als odts/dtb in generally). I'm interested and eager to learn but don't know where to start with this. Edit: I have absolutely no idea what I'm doing... But found this out looking at the schematics: PIN Define CFG PL10 BT-WIFI-ON 1 PM0 WL-WAKE-AP 0 PM1 BT-WAKE-AP 0 PM2 AP-WAKE-BT 1 PM3 WL-REG-ON 1 PM3 BT-REG-ON 1 I also found out that the schematics are the same as the AP6255. Edit2: Also found this topic.... Maybe if I convert DTB to DTS (and back) and add this: /* There's the BT part of the AP6256 connected to that UART */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm4345c5"; clocks = <&rtc 1>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ max-speed = <1500000>; }; }; And copy https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 to: /lib/firmware/brcm/(BCM4345C5.hcd) Am I correct that it will it work then? (I'm using a OPi3)
  6. Tried to do something with bluetooth, but "hcitool" and "bluetoothctl" tells me that there is no bluetooth controller. Anybody got this working yet?
  7. / _ \| _ \(_) |___ / | | | | |_) | | |_ \ | |_| | __/| | ___) | \___/|_| |_| |____/ Welcome to Debian Stretch with Armbian Linux 5.1.7-sunxi64 System load: 0.02 0.01 0.00 Up time: 8:04 hours Memory usage: 9 % of 1997MB IP: x.x.x.x CPU temp: 46°C Usage of /: 69% of 7.1G Everything is working now, I've installed to eMMC. Thanks everyone for working on this! The OPi3 is pretty fast too!
  8. [ o.k. ] Writing U-boot bootloader [ /dev/loop0 ] [ o.k. ] Done building [ /orangepi/build/output/images/Armbian_5.89_Orangepi3_Debian_stretch_dev_5.1.7.img ] [ o.k. ] Runtime [ 33 min ] [ o.k. ] Repeat Build Options [ ./compile.sh BOARD=orangepi3 BRANCH=dev RELEASE=stretch BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no ] OK, so building my own image worked.. But it still isn't working on my OPi3. Can anyone please provide a working IMG (5.88.190601 - 5.1.5)? Or tell me how to change the dtb file?
  9. There is a new update from PiHole that should fix this issue.
  10. Have you tried to install lm-sensors and run "sensors" to see what sensors are available?
  11. What has this to do with Armbian? But hey... Google automaticly converts the date/time scheme when you import. Just do it via the webGUI of Google.
  12. You'll probably need something like a buck converter. 12V HDD's can get power hungry when they spin-up. Up to 15W each.
  13. It feels like it takes forever.. +- 40 min on a Intel i5 6500 with 16GB memory.. Memory is not really important, it's CPU intensive.
  14. NanoPi M4 or RockPro64 indeed. A OrangePI 3 would do the job also if the PCI-E was OK.
  15. I'm planning on buying the OPI3 because of the rich feature set. I would love to put Armbian on it. Building an image is no problem for me but I'm lost tracing the current issues and would like to know what those are at the moment. I've found out: - HDMI resolution output issues. Fixed - CPU speed throttling issues. Fixed - WiFi issues. Fixed - eMMC issues: Fixed - NIC issues: ??? No issues for some? - Bluetooth issues: ??? - Sound issues: ??? - Reboot issues: ??? Can someone tell me if I'm correct about the above? Or i'm I wrong or missing something?