• Content Count

  • Joined

  • Last visited

About houldsg

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I applied the workaround outlined by Mikaey and can confirm that throttling now works properly for me too. Thanks Everyone
  2. I totally missed it. Thanks. And it looks like I don't have to reinstall a new image, which is awesome.
  3. Beautiful. I'll try tonight, time permitting.
  4. Looks promising! My scenario doesn't look exactly like znoxx's. Mine idles at around 45-50 degrees. I have heatsinks attached and the case is the one sold on aliexpress with the removable top removed. It has bad airflow design but I'm not running it in a sealed box or anything. It's set up to use SPI to boot from an ssd. The uboot version in SPI is from "/usr/lib/linux-u-boot-next-orangepipc2_5.75_arm64" (using instructions from here) Hardware log is here: http://ix.io/1FUF And here's a test with the fan disconnected (I stopped the test at 80 degrees be
  5. It didn't happen to me on the previous image I was running (ARMBIAN 5.32.170803 nightly Ubuntu 16.04.5 LTS 4.11.10-sun50iw2) When I have some time, I'll put an older version on an sd card and prove it with data. Can anyone else identify the version they noticed the change in behavior?
  6. I'm having the same issue as well. I had to stick a small fan on the case for now. Under load, the frequency never drops below 1104MHz. I'm a bit of a noob but I've been trying to investigate (so let me know if I'm way off). houldsg@orangepipc2:~$ uname -a Linux orangepipc2 4.19.20-sunxi64 #5.75 SMP Fri Feb 8 10:29:25 CET 2019 aarch64 aarch64 aarch64 GNU/Linux houldsg@orangepipc2:~$ cat /sys/devices/virtual/thermal/thermal_zone0/ available_policies cdev0_weight k_d k_pu policy subsystem/ trip_point_0_hyst trip_point_1