I modified the ethernet dtb for x96max 2GB version, it could boot but there is no driver for ethernet device from dmesg. Could you release the new image for the x96max 2GB version? Thanks
ethernet@ff3f0000 {
compatible = "amlogic, g12a-eth-dwmac", "snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000 0x0 0xff634540 0x0 0x8 0x0 0xff64c000 0x0 0xa0>;
reg-names = "eth_base", "eth_cfg", "eth_pll";
interrupts = <0x0 0x8 0x1>;
interrupt-names = "macirq";
status = "okay";
clocks = <0x2 0x38>;
clock-names = "ethclk81";
pll_val = <0x9c0040a 0x927e0000 0xac5f49e5>;
analog_val = <0x20200000 0xc000 0x23>;
pinctrl-names = "external_eth_pins";
pinctrl-0 = <0x11>;
mc_val = <0x1621>;
cali_val = <0x30000>;
internal_phy = <0x0>;
};
external_eth_pins {
linux,phandle = <0x11>;
phandle = <0x11>;
mux {
groups = "eth_mdio", "eth_mdc", "eth_rgmii_rx_clk", "eth_rx_dv", "eth_rxd0", "eth_rxd1", "eth_rxd2_rgmii", "eth_rxd3_rgmii", "eth_rgmii_tx_clk", "eth_txen", "eth_txd0", "eth_txd1", "eth_txd2_rgmii", "eth_txd3_rgmii";
function = "eth";
drive-strength = <0x3>;
};
};