SR-G
-
Posts
37 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by SR-G
-
-
cancelled - power unit cable was not correctly plugged in and NAS was running on battery, hence the automated shutdowns, i think (but it's not clearly printed / displayed anywhere, i would say that it could have helped).
-
NAS was on during the night and this morning : no more RAID5 (with 5 WD HDD).
After reboot, i see that two disks are missing :
```
[Sun Jul 18 11:49:11 2021] ata1: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:49:14 2021] ata2: softreset failed (device not ready)
[Sun Jul 18 11:49:23 2021] ata1: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:49:24 2021] ata2: softreset failed (device not ready)
[Sun Jul 18 11:49:38 2021] ata1: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:49:38 2021] ata1.00: failed to set xfermode (err_mask=0x40)
[Sun Jul 18 11:49:56 2021] ata2: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:49:56 2021] ata2: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:49:57 2021] ata1: illegal qc_active transition (00000000->00000001)
[Sun Jul 18 11:50:06 2021] ata1: illegal qc_active transition (00000000->00000001)```
```
11:49 root@helios64 /mnt/internal# ll /dev/sd*
brw-rw---- 1 root disk 8, 32 2021-07-18 11:48 /dev/sdc
brw-rw---- 1 root disk 8, 33 2021-07-18 11:48 /dev/sdc1
brw-rw---- 1 root disk 8, 48 2021-07-18 11:48 /dev/sdd
brw-rw---- 1 root disk 8, 49 2021-07-18 11:48 /dev/sdd1
brw-rw---- 1 root disk 8, 64 2021-07-18 11:48 /dev/sde
brw-rw---- 1 root disk 8, 65 2021-07-18 11:48 /dev/sde1
```What's happening ?
Is it also a PSU that failed (like for HELIOS4 NAS ...) ? PSU unit light seems OK (blue led on the alimentation itself, not flashing)
-
So with a new PSU (30€ on amazon) my HELIOS4 NAS is working again.
-
Correct, 4 x 3.5" HDD in the NAS
-
Hello,
HELIOS4 system was running (and doing nothing), when it suddenly crashed.
After restart, nothing automatically loaded (system stuck in emergency mode), once USB cable plugged i managed to log only once into the system, and discovered that no disks where mounted anymore (not even available / detect by the board) (it's not so easy as it seems there are some freezes, maybe due to the hardware errors related to he missing hdd links)
13:00 root@helios4 ~# ll /dev/sd* zsh: no matches found: /dev/sd*Is this a failing PSU (like in other threads) ?
To be noted : the PSU has a blinking green light ... i can't remember if it was like that before ?
In journalctl :
May 26 12:57:03 helios4 kernel: ata1: SATA link down (SStatus 0 SControl 300) May 26 12:57:04 helios4 kernel: ata1: SATA link down (SStatus 0 SControl 300) May 26 12:57:06 helios4 kernel: ata1: COMRESET failed (errno=-32) May 26 12:57:06 helios4 kernel: ata1: reset failed (errno=-32), retrying in 8 se May 26 12:57:06 helios4 kernel: ata2: SATA link down (SStatus 0 SControl 300) May 26 12:57:07 helios4 kernel: ata2: SATA link down (SStatus 0 SControl 300) May 26 12:57:08 helios4 kernel: ata2: SATA link down (SStatus 0 SControl 300) May 26 12:57:11 helios4 kernel: ata2: COMRESET failed (errno=-32) May 26 12:57:11 helios4 kernel: ata2: reset failed (errno=-32), retrying in 8 se May 26 12:57:12 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:12 helios4 kernel: ata4: COMRESET failed (errno=-32) May 26 12:57:12 helios4 kernel: ata4: reset failed (errno=-32), retrying in 8 se May 26 12:57:13 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:14 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:15 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:15 helios4 kernel: ata1: SATA link down (SStatus 0 SControl 300) May 26 12:57:16 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:16 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:17 helios4 kernel: ata1: SATA link down (SStatus 0 SControl 300) May 26 12:57:17 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:17 helios4 kernel: ata1: SATA link down (SStatus 0 SControl 300) May 26 12:57:18 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:19 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 26 12:57:19 helios4 kernel: ata3: SATA link down (SStatus 0 SControl 300)Full boot log :
QuoteU-Boot SPL 2019.04-armbian (Nov 23 2020 - 16:19:37 +0100)
High speed PHY - Version: 2.0
Detected Device ID 6828
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 6 | SATA0 |
| 1 | 5 | USB3 HOST0 |
| 2 | 6 | SATA1 |
| 3 | 6 | SATA3 |
| 4 | 6 | SATA2 |
| 5 | 5 | USB3 HOST1 |
--------------------------------
High speed PHY - Ended Successfully
mv_ddr: mv_ddr-armada-18.09.2
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
mv_ddr: completed successfully
Trying to boot from MMC1
U-Boot 2019.04-armbian (Nov 23 2020 - 16:19:37 +0100)SoC: MV88F6828-A0 at 1600 MHz
DRAM: 2 GiB (800 MHz, 32-bit, ECC enabled)
MMC: mv_sdh: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **** Unable to read "/boot/boot.env" from mmc0:1 **
Model: Helios4
Board: Helios4
SCSI: MVEBU SATA INIT
Target spinup took 0 ms.
Target spinup took 0 ms.
AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
flags: 64bit ncq led only pmp fbss pio slum part sxs
No Link on this port!
Can not start port 1Net:
Warning: ethernet@70000 (eth1) using random MAC address - 8a:1e:dc:26:d7:9a
eth1: ethernet@70000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2996 bytes read in 214 ms (13.7 KiB/s)
## Executing script at 03000000
Boot script loaded from mmc
120 bytes read in 182 ms (0 Bytes/s)
27241 bytes read in 627 ms (42 KiB/s)
9448011 bytes read in 1878 ms (4.8 MiB/s)
6607552 bytes read in 1379 ms (4.6 MiB/s)
## Loading init Ramdisk from Legacy Image at 02880000 ...
Image Name: uInitrd
Created: 2021-05-14 13:15:56 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9447947 Bytes = 9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 02040000
Booting using the fdt blob at 0x2040000
Loading Ramdisk to 0f6fd000, end 0ffffa0b ... OK
ERROR: reserving fdt memory region failed (addr=2040000 size=6c000)
Loading Device Tree to 0f68e000, end 0f6fcfff ... OKStarting kernel ...
Uncompressing Linux... done, booting the kernel.
Loading, please wait...
Starting version 241
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1: recovering journal
/dev/mmcblk0p1: clean, 75903/1818432 files, 933326/7567200 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.Welcome to Debian GNU/Linux 10 (buster)!
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on fsck to fsckd communication Socket.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Reached target Slices.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target System Time Synchronized.
[ OK ] Listening on Journal Socket.
Mounting RPC Pipe File System...
Starting udev Coldplug all Devices...
Starting Load Kernel Modules...
Starting Set the console keyboard layout...
Mounting Kernel Debug File System...
Mounting POSIX Message Queue File System...
Starting Create list of re…odes for the current kernel...
Starting Remount Root and Kernel File Systems...
Starting Nameserver information manager...
[ OK ] Reached target Swap.
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Mounted RPC Pipe File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of req… nodes for the current kernel.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Set the console keyboard layout.
Starting Create System Users...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Nameserver information manager.
[ OK ] Started Create System Users.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted FUSE Control File System.
Starting Create Static Device Nodes in /dev...
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Started Helper to synchronize boot up for ifupdown.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
[ OK ] Mounted /tmp.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Found device /dev/ttyS0.
[ TIME ] Timed out waiting for device /dev/md/helios4:0.
[DEPEND] Dependency failed for /mnt/internal/raid.
[DEPEND] Dependency failed for Local File Systems.
[DEPEND] Dependency failed for Mark… need to relabel after reboot.
Starting Raise network interfaces...
Starting Set console font and keymap...
Starting Preprocess NFS configuration...
Starting Armbian ZRAM config...
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Closed Syslog Socket.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Timers.
[ OK ] Reached target Sockets.
Starting Armbian hardware monitoring...
Starting Armbian hardware optimization...
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
[ OK ] Started Set console font and keymap.
[ OK ] Started Preprocess NFS configuration.
[ OK ] Started Armbian hardware monitoring.
[ OK ] Started Armbian hardware optimization.
[ OK ] Reached target NFS client services.
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
[ OK ] Started Armbian ZRAM config.
Starting Armbian memory supported logging...
[ OK ] Started Armbian memory supported logging.
Starting Journal Service...
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started RPC bind portmap service.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Started Update UTMP about System Runlevel Changes.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemctl default" or "eGive root password for maintenance
(or press Control-D to continue):
Reloading system manager configuration
Starting default target -
So on my side, after my latest reinstallation (due to corrupted OS) :
- with default installation / configuration out of the box, i had one freeze every 24h
- by switching to "powersave", or to "performance" mode, and with min CPU frequency = max CPU frequency = either 1.8Ghz either 1.6Ghz : still the same (one freeze per day)
- by switching to "performance" mode, with min CPU frequency = max CPU frequency = 1.4Ghz, it seems now more stable (uptime = 5 days for now)
So my guts feeling is really that these issues :
- are mainly related to the cpufreq mechanizm
- and probably related to what has been nicely spotted before (by Vin), the fact that 2 core have different max frequency range (as expected per the specs, but maybe with a corner case in the cpufreq governance)
Quote8:38 root@helios64 ~# cat /sys/devices/system/cpu/cpufreq/policy*/scaling_min_freq
1416000
14160008:38 root@helios64 ~# uptime
08:38:34 up 5 days, 17:25, 1 user, load average: 0.00, 0.00, 0.00 -
I'm a bit confused to not have the same values on my side for all policies ...
Whereas :
(> i set min = max = 1.6Ghz through armbian-config)
What are these two different policies in /cpufreq/ ? (policy0 + policy4 in /cpufreq/ on my side)
Is it like "policy0" is used by "performance" governor mode and policy4 by "powersave" ? (in which case it would make sense for me to have different values)
-
On my side :
- OS (debian helios64 image) installed on SD card, SD card is a samsung one (128G)
- 5x Western Digital HDD (all the same) WDBBGB0140HBK-EESN 14TB, plugged in a regular way sda > sde (and so obviously no M.2 plugged in)
- I have the internal battery plugged in
At OS level :
- docker with netdata container (and nothing else for now)
- mdadm activated for the RAID-5 array
- SMBFS with a few shares- NFS with shares mounted on other servers (crashes where already happening before switching to NFS instead of SSHFS for regular accesses)
At this time at "workaround" side :
- latest kernel 5.10.21
- with patched boot.scr
- governor = powersave, min speed = max speed = 1.6Ghz (and not 1.8Ghz)
it seems to be the "least problematic" configuration (one crash every two days and not every day ...)
About load :
- rclone each day during a few hours to mirror everything in the cloud (limited to 750GB per day so it takes quite some days) - nearly no freezes during this
- borgbackup fetching from another server and through NFS some file to backup each night - i suspect some freezes there
- some NFS shares being accessed for various tasks all the times (sometimes with a lot of IO) - i suspect some freezes there
- all this is quite reasonable about load and is not generating a lot of IO in the end
Helios64 board ordered on 2020, jan 12 (order 1312), sent on 2020, sept 21 and received sometime around beginning of october (NAS not installed before december)
By the way i also have a Helios4 board since a long time, and i never got any freeze with it.
-
I've had a stable system (with previous kernel) for 30 days, then one freeze, then system corrupted, then reinstall everything, then now several freezes per day (at first with vanilla armbian config)
Same kernel than you :
Linux helios64 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux
I can't test different drives, i've 5 WD digital plugged in as a RAID5 array.
-
Many additional freezes in the meanwhile.
Now (with latest kernel) i'm unable to have a stable situation whatever i do :
- latest kernel
- boot.scr put back
- same min and max freq
- governor on "performance" or "schedutil" or whatever
I always have freeze.
I'm at the point i'm about to be DISGUSTED by this NAS - i've never lost so much time with an electronic device.
What is the expected delay before having something stable for this NAS ?
Is it only worked on by KOBOL ?
How many people have a stable NAS versus an unstable NAS ?
Is my device faulty in any way ?
What is the refund policy on KOBOL ?
-
And another freeze this night (still with fresh install / latest kernel + modified boor.scr put back in place).
-
And (after having lost 2 hours yesterday to reinstall the system), today : yet another freeze (this time with the latest image / kernel and default out-of-the-box configuration).
This really starts to be insane and nearly unusable.
-
And a second freeze one hour after the first one (blinking red light), while upgrading the kernel. Now of course nothing boots up.
-
Okay so i got a freeze today, so even in my previous situation (as described in previous posts) it was not 100% stable (but still way better than at first).
-
On 2/16/2021 at 4:27 PM, SR-G said:
So i don't know if it's enough to say that everything is now under control, but for now my uptime is +12 days (before, i had at least one freeze per week, and often more than that).
So a little bit too soon to be sure.
+ for now i'm avoiding 5.10 kernel installation and corresponding reboot.
So 26 days as uptime now - it seems better.
Quote10:11:49 up 26 days, 16:26, 2 users, load average: 0,13, 0,14, 0,06
-
About why your NAS has been frozen, maybe indeed (it's quite possible), but sadly in addition you are encountering some other issues during the reboot (that I haven't encountered on my side - crossing fingers on that topic ...). But of course these many freezes and reboots can't be good in any way for the operating system on disk or even for the hardware (hdd)...
I would suggest to try a fresh reinstall on a second scarf to see if everything boots up nicely, as a first step ...
-
So i don't know if it's enough to say that everything is now under control, but for now my uptime is +12 days (before, i had at least one freeze per week, and often more than that).
Quoteuptime
15:56:12 up 12 days, 22:10, 3 users, load average: 4,24, 4,12, 3,64
So a little bit too soon to be sure.
+ for now i'm avoiding 5.10 kernel installation and corresponding reboot.
-
Mhh so (per other thread) i tried 2nd proposal (without luck : i still have freeze, as stated in other thread) BUT nothing was said about reverting the CPU governance (so i was still in "performance" mode with same min/max values). To what should i revert the CPU gorvenance values ? (min possible value / max possible value + powersave ?)
-
So i applyed these parameters on 2021/02/01 and today (2 days later) i just got another freeze (this time i had IO but not a lot - was uploading files from NAS to cloud at 40MB/s - but it's of course not the first time i have some IO during hours, it's just that until now most freezes have happened without IO).
No RED LED blinking this time once freezed + all HDD leds are ON but are not blinking.
I had an opened SSH connection and nothing has been printed there, it's just frozen (ping from another host not answered, and so on).
SpoilerQuote[mer. févr. 3 17:45:32 2021] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[mer. févr. 3 17:45:32 2021] Linux version 5.9.14-rockchip64 (root@desktop) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020
[mer. févr. 3 17:45:32 2021] Machine model: Helios64
[mer. févr. 3 17:45:32 2021] efi: UEFI not found.
[mer. févr. 3 17:45:32 2021] cma: Reserved 128 MiB at 0x00000000ec800000
[mer. févr. 3 17:45:32 2021] NUMA: No NUMA configuration found
[mer. févr. 3 17:45:32 2021] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[mer. févr. 3 17:45:32 2021] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
[mer. févr. 3 17:45:32 2021] Zone ranges:
[mer. févr. 3 17:45:32 2021] DMA [mem 0x0000000000200000-0x000000003fffffff]
[mer. févr. 3 17:45:32 2021] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
[mer. févr. 3 17:45:32 2021] Normal empty
[mer. févr. 3 17:45:32 2021] Movable zone start for each node
[mer. févr. 3 17:45:32 2021] Early memory node ranges
[mer. févr. 3 17:45:32 2021] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[mer. févr. 3 17:45:32 2021] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[mer. févr. 3 17:45:32 2021] On node 0 totalpages: 1015296
[mer. févr. 3 17:45:32 2021] DMA zone: 4088 pages used for memmap
[mer. févr. 3 17:45:32 2021] DMA zone: 0 pages reserved
[mer. févr. 3 17:45:32 2021] DMA zone: 261632 pages, LIFO batch:63
[mer. févr. 3 17:45:32 2021] DMA32 zone: 11776 pages used for memmap
[mer. févr. 3 17:45:32 2021] DMA32 zone: 753664 pages, LIFO batch:63
[mer. févr. 3 17:45:32 2021] psci: probing for conduit method from DT.
[mer. févr. 3 17:45:32 2021] psci: PSCIv1.0 detected in firmware.
[mer. févr. 3 17:45:32 2021] psci: Using standard PSCI v0.2 function IDs
[mer. févr. 3 17:45:32 2021] psci: MIGRATE_INFO_TYPE not supported.
[mer. févr. 3 17:45:32 2021] psci: SMC Calling Convention v1.0
[mer. févr. 3 17:45:32 2021] percpu: Embedded 32 pages/cpu s93784 r8192 d29096 u131072
[mer. févr. 3 17:45:32 2021] pcpu-alloc: s93784 r8192 d29096 u131072 alloc=32*4096
[mer. févr. 3 17:45:32 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[mer. févr. 3 17:45:32 2021] Detected VIPT I-cache on CPU0
[mer. févr. 3 17:45:32 2021] CPU features: detected: ARM erratum 845719
[mer. févr. 3 17:45:32 2021] CPU features: detected: GIC system register CPU interface
[mer. févr. 3 17:45:32 2021] Built 1 zonelists, mobility grouping on. Total pages: 999432
[mer. févr. 3 17:45:32 2021] Policy zone: DMA32
[mer. févr. 3 17:45:32 2021] Kernel command line: root=UUID=a79a14c0-3cf4-4fb9-a6c6-838571351371 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=21825e31-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[mer. févr. 3 17:45:32 2021] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[mer. févr. 3 17:45:32 2021] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[mer. févr. 3 17:45:32 2021] mem auto-init: stack:off, heap alloc:on, heap free:off
[mer. févr. 3 17:45:32 2021] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[mer. févr. 3 17:45:32 2021] Memory: 3736004K/4061184K available (14464K kernel code, 2094K rwdata, 5980K rodata, 4224K init, 573K bss, 194108K reserved, 131072K cma-reserved)
[mer. févr. 3 17:45:32 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[mer. févr. 3 17:45:32 2021] rcu: Preemptible hierarchical RCU implementation.
[mer. févr. 3 17:45:32 2021] rcu: RCU event tracing is enabled.
[mer. févr. 3 17:45:32 2021] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[mer. févr. 3 17:45:32 2021] Trampoline variant of Tasks RCU enabled.
[mer. févr. 3 17:45:32 2021] Rude variant of Tasks RCU enabled.
[mer. févr. 3 17:45:32 2021] Tracing variant of Tasks RCU enabled.
[mer. févr. 3 17:45:32 2021] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[mer. févr. 3 17:45:32 2021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[mer. févr. 3 17:45:32 2021] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[mer. févr. 3 17:45:32 2021] GICv3: GIC: Using split EOI/Deactivate mode
[mer. févr. 3 17:45:32 2021] GICv3: 256 SPIs implemented
[mer. févr. 3 17:45:32 2021] GICv3: 0 Extended SPIs implemented
[mer. févr. 3 17:45:32 2021] GICv3: Distributor has no Range Selector support
[mer. févr. 3 17:45:32 2021] GICv3: 16 PPIs implemented
[mer. févr. 3 17:45:32 2021] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[mer. févr. 3 17:45:32 2021] ITS [mem 0xfee20000-0xfee3ffff]
[mer. févr. 3 17:45:32 2021] ITS@0x00000000fee20000: allocated 65536 Devices @f6d00000 (flat, esz 8, psz 64K, shr 0)
[mer. févr. 3 17:45:32 2021] ITS: using cache flushing for cmd queue
[mer. févr. 3 17:45:32 2021] GICv3: using LPI property table @0x00000000f6cb0000
[mer. févr. 3 17:45:32 2021] GIC: using cache flushing for LPI property table
[mer. févr. 3 17:45:32 2021] GICv3: CPU0: using allocated LPI pending table @0x00000000f6cc0000
[mer. févr. 3 17:45:32 2021] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[mer. févr. 3 17:45:32 2021] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[mer. févr. 3 17:45:32 2021] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
[mer. févr. 3 17:45:32 2021] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[mer. févr. 3 17:45:32 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[mer. févr. 3 17:45:32 2021] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[mer. févr. 3 17:45:32 2021] Console: colour dummy device 80x25
[mer. févr. 3 17:45:32 2021] printk: console [tty1] enabled
[mer. févr. 3 17:45:32 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[mer. févr. 3 17:45:32 2021] pid_max: default: 32768 minimum: 301
[mer. févr. 3 17:45:32 2021] LSM: Security Framework initializing
[mer. févr. 3 17:45:32 2021] Yama: becoming mindful.
[mer. févr. 3 17:45:32 2021] AppArmor: AppArmor initialized
[mer. févr. 3 17:45:32 2021] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[mer. févr. 3 17:45:32 2021] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[mer. févr. 3 17:45:32 2021] rcu: Hierarchical SRCU implementation.
[mer. févr. 3 17:45:32 2021] Platform MSI: interrupt-controller@fee20000 domain created
[mer. févr. 3 17:45:32 2021] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[mer. févr. 3 17:45:32 2021] EFI services will not be available.
[mer. févr. 3 17:45:32 2021] smp: Bringing up secondary CPUs ...
[mer. févr. 3 17:45:32 2021] Detected VIPT I-cache on CPU1
[mer. févr. 3 17:45:32 2021] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[mer. févr. 3 17:45:32 2021] GICv3: CPU1: using allocated LPI pending table @0x00000000f6cd0000
[mer. févr. 3 17:45:32 2021] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[mer. févr. 3 17:45:32 2021] Detected VIPT I-cache on CPU2
[mer. févr. 3 17:45:32 2021] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[mer. févr. 3 17:45:32 2021] GICv3: CPU2: using allocated LPI pending table @0x00000000f6ce0000
[mer. févr. 3 17:45:32 2021] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[mer. févr. 3 17:45:32 2021] Detected VIPT I-cache on CPU3
[mer. févr. 3 17:45:32 2021] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[mer. févr. 3 17:45:32 2021] GICv3: CPU3: using allocated LPI pending table @0x00000000f6cf0000
[mer. févr. 3 17:45:32 2021] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[mer. févr. 3 17:45:32 2021] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[mer. févr. 3 17:45:32 2021] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[mer. févr. 3 17:45:32 2021] Detected PIPT I-cache on CPU4
[mer. févr. 3 17:45:32 2021] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[mer. févr. 3 17:45:32 2021] GICv3: CPU4: using allocated LPI pending table @0x00000000f6d80000
[mer. févr. 3 17:45:32 2021] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[mer. févr. 3 17:45:32 2021] Detected PIPT I-cache on CPU5
[mer. févr. 3 17:45:32 2021] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[mer. févr. 3 17:45:32 2021] GICv3: CPU5: using allocated LPI pending table @0x00000000f6d90000
[mer. févr. 3 17:45:32 2021] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[mer. févr. 3 17:45:32 2021] smp: Brought up 1 node, 6 CPUs
[mer. févr. 3 17:45:32 2021] SMP: Total of 6 processors activated.
[mer. févr. 3 17:45:32 2021] CPU features: detected: 32-bit EL0 Support
[mer. févr. 3 17:45:32 2021] CPU features: detected: CRC32 instructions
[mer. févr. 3 17:45:32 2021] CPU features: detected: 32-bit EL1 Support
[mer. févr. 3 17:45:32 2021] CPU: All CPU(s) started at EL2
[mer. févr. 3 17:45:32 2021] alternatives: patching kernel code
[mer. févr. 3 17:45:32 2021] devtmpfs: initialized
[mer. févr. 3 17:45:32 2021] Registered cp15_barrier emulation handler
[mer. févr. 3 17:45:32 2021] Registered setend emulation handler
[mer. févr. 3 17:45:32 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[mer. févr. 3 17:45:32 2021] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[mer. févr. 3 17:45:32 2021] xor: measuring software checksum speed
[mer. févr. 3 17:45:32 2021] 8regs : 2345.000 MB/sec
[mer. févr. 3 17:45:32 2021] 32regs : 2757.000 MB/sec
[mer. févr. 3 17:45:32 2021] arm64_neon: 2279.000 MB/sec
[mer. févr. 3 17:45:32 2021] xor: using function: 32regs (2757.000 MB/sec)
[mer. févr. 3 17:45:32 2021] pinctrl core: initialized pinctrl subsystem
[mer. févr. 3 17:45:32 2021] DMI not present or invalid.
[mer. févr. 3 17:45:32 2021] NET: Registered protocol family 16
[mer. févr. 3 17:45:32 2021] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[mer. févr. 3 17:45:32 2021] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[mer. févr. 3 17:45:32 2021] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[mer. févr. 3 17:45:32 2021] audit: initializing netlink subsys (disabled)
[mer. févr. 3 17:45:32 2021] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
[mer. févr. 3 17:45:32 2021] thermal_sys: Registered thermal governor 'fair_share'
[mer. févr. 3 17:45:32 2021] thermal_sys: Registered thermal governor 'bang_bang'
[mer. févr. 3 17:45:32 2021] thermal_sys: Registered thermal governor 'step_wise'
[mer. févr. 3 17:45:32 2021] thermal_sys: Registered thermal governor 'user_space'
[mer. févr. 3 17:45:32 2021] cpuidle: using governor menu
[mer. févr. 3 17:45:32 2021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[mer. févr. 3 17:45:32 2021] ASID allocator initialised with 65536 entries
[mer. févr. 3 17:45:32 2021] Serial: AMBA PL011 UART driver
[mer. févr. 3 17:45:32 2021] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[mer. févr. 3 17:45:32 2021] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[mer. févr. 3 17:45:32 2021] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[mer. févr. 3 17:45:32 2021] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[mer. févr. 3 17:45:32 2021] cryptd: max_cpu_qlen set to 1000
[mer. févr. 3 17:45:32 2021] raid6: neonx8 gen() 1665 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx8 xor() 1224 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx4 gen() 1688 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx4 xor() 1267 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx2 gen() 1506 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx2 xor() 1161 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx1 gen() 1177 MB/s
[mer. févr. 3 17:45:32 2021] raid6: neonx1 xor() 933 MB/s
[mer. févr. 3 17:45:32 2021] raid6: int64x8 gen() 997 MB/s
[mer. févr. 3 17:45:32 2021] raid6: int64x8 xor() 575 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x4 gen() 990 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x4 xor() 589 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x2 gen() 927 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x2 xor() 522 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x1 gen() 724 MB/s
[mer. févr. 3 17:45:33 2021] raid6: int64x1 xor() 390 MB/s
[mer. févr. 3 17:45:33 2021] raid6: using algorithm neonx4 gen() 1688 MB/s
[mer. févr. 3 17:45:33 2021] raid6: .... xor() 1267 MB/s, rmw enabled
[mer. févr. 3 17:45:33 2021] raid6: using neon recovery algorithm
[mer. févr. 3 17:45:33 2021] vcc12v_dcin_bkup: supplied by vcc12v_dcin
[mer. févr. 3 17:45:33 2021] vcc12v_hdd: supplied by vcc12v_dcin_bkup
[mer. févr. 3 17:45:33 2021] vcc5v0_perdev: supplied by vcc12v_dcin_bkup
[mer. févr. 3 17:45:33 2021] pcie_power: supplied by vcc5v0_perdev
[mer. févr. 3 17:45:33 2021] vcc5v0_usb: supplied by vcc5v0_perdev
[mer. févr. 3 17:45:33 2021] vcc5v0_typec: supplied by vcc5v0_usb
[mer. févr. 3 17:45:33 2021] vcc5v0_hdd: supplied by vcc12v_dcin_bkup
[mer. févr. 3 17:45:33 2021] vcc5v0_sys: supplied by vcc12v_dcin_bkup
[mer. févr. 3 17:45:33 2021] vcc3v3_sys_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:33 2021] vcc0v9_s3: supplied by vcc3v3_sys_s3
[mer. févr. 3 17:45:33 2021] avdd_1v8_s0: supplied by vcc3v3_sys_s3
[mer. févr. 3 17:45:33 2021] vcc3v0_sd: supplied by vcc3v3_sys_s3
[mer. févr. 3 17:45:33 2021] usblan_power: supplied by vcc5v0_usb
[mer. févr. 3 17:45:33 2021] iommu: Default domain type: Translated
[mer. févr. 3 17:45:33 2021] vgaarb: loaded
[mer. févr. 3 17:45:33 2021] SCSI subsystem initialized
[mer. févr. 3 17:45:33 2021] libata version 3.00 loaded.
[mer. févr. 3 17:45:33 2021] usbcore: registered new interface driver usbfs
[mer. févr. 3 17:45:33 2021] usbcore: registered new interface driver hub
[mer. févr. 3 17:45:33 2021] usbcore: registered new device driver usb
[mer. févr. 3 17:45:33 2021] pps_core: LinuxPPS API ver. 1 registered
[mer. févr. 3 17:45:33 2021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[mer. févr. 3 17:45:33 2021] PTP clock support registered
[mer. févr. 3 17:45:33 2021] EDAC MC: Ver: 3.0.0
[mer. févr. 3 17:45:33 2021] NetLabel: Initializing
[mer. févr. 3 17:45:33 2021] NetLabel: domain hash size = 128
[mer. févr. 3 17:45:33 2021] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[mer. févr. 3 17:45:33 2021] NetLabel: unlabeled traffic allowed by default
[mer. févr. 3 17:45:33 2021] clocksource: Switched to clocksource arch_sys_counter
[mer. févr. 3 17:45:33 2021] VFS: Disk quotas dquot_6.6.0
[mer. févr. 3 17:45:33 2021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[mer. févr. 3 17:45:33 2021] AppArmor: AppArmor Filesystem Enabled
[mer. févr. 3 17:45:33 2021] NET: Registered protocol family 2
[mer. févr. 3 17:45:33 2021] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[mer. févr. 3 17:45:33 2021] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[mer. févr. 3 17:45:33 2021] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[mer. févr. 3 17:45:33 2021] TCP: Hash tables configured (established 32768 bind 32768)
[mer. févr. 3 17:45:33 2021] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[mer. févr. 3 17:45:33 2021] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[mer. févr. 3 17:45:33 2021] NET: Registered protocol family 1
[mer. févr. 3 17:45:33 2021] NET: Registered protocol family 44
[mer. févr. 3 17:45:33 2021] PCI: CLS 0 bytes, default 64
[mer. févr. 3 17:45:33 2021] Trying to unpack rootfs image as initramfs...
[mer. févr. 3 17:45:34 2021] Freeing initrd memory: 19828K
[mer. févr. 3 17:45:34 2021] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[mer. févr. 3 17:45:34 2021] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[mer. févr. 3 17:45:34 2021] kvm [1]: IPA Size Limit: 40bits
[mer. févr. 3 17:45:34 2021] kvm [1]: vgic-v2@fff20000
[mer. févr. 3 17:45:34 2021] kvm [1]: GIC system register CPU interface enabled
[mer. févr. 3 17:45:34 2021] kvm [1]: vgic interrupt IRQ10
[mer. févr. 3 17:45:34 2021] kvm [1]: Hyp mode initialized successfully
[mer. févr. 3 17:45:34 2021] Initialise system trusted keyrings
[mer. févr. 3 17:45:34 2021] Key type blacklist registered
[mer. févr. 3 17:45:34 2021] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[mer. févr. 3 17:45:34 2021] zbud: loaded
[mer. févr. 3 17:45:34 2021] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[mer. févr. 3 17:45:34 2021] fuse: init (API version 7.31)
[mer. févr. 3 17:45:34 2021] integrity: Platform Keyring initialized
[mer. févr. 3 17:45:35 2021] Key type asymmetric registered
[mer. févr. 3 17:45:35 2021] Asymmetric key parser 'x509' registered
[mer. févr. 3 17:45:35 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[mer. févr. 3 17:45:35 2021] io scheduler mq-deadline registered
[mer. févr. 3 17:45:35 2021] io scheduler kyber registered
[mer. févr. 3 17:45:35 2021] io scheduler bfq registered
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[mer. févr. 3 17:45:35 2021] OF: /pcie@f8000000: Missing device_type
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[mer. févr. 3 17:45:35 2021] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[mer. févr. 3 17:45:35 2021] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[mer. févr. 3 17:45:35 2021] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[mer. févr. 3 17:45:35 2021] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[mer. févr. 3 17:45:35 2021] vdd_log: supplied by regulator-dummy
[mer. févr. 3 17:45:35 2021] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[mer. févr. 3 17:45:35 2021] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[mer. févr. 3 17:45:35 2021] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[mer. févr. 3 17:45:35 2021] printk: console [ttyS2] enabled
[mer. févr. 3 17:45:35 2021] Serial: AMBA driver
[mer. févr. 3 17:45:35 2021] cacheinfo: Unable to detect cache hierarchy for CPU 0
[mer. févr. 3 17:45:35 2021] loop: module loaded
[mer. févr. 3 17:45:35 2021] libphy: Fixed MDIO Bus: probed
[mer. févr. 3 17:45:35 2021] tun: Universal TUN/TAP device driver, 1.6
[mer. févr. 3 17:45:35 2021] thunder_xcv, ver 1.0
[mer. févr. 3 17:45:35 2021] thunder_bgx, ver 1.0
[mer. févr. 3 17:45:35 2021] nicpf, ver 1.0
[mer. févr. 3 17:45:35 2021] e1000e: Intel(R) PRO/1000 Network Driver
[mer. févr. 3 17:45:35 2021] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[mer. févr. 3 17:45:35 2021] igb: Intel(R) Gigabit Ethernet Network Driver
[mer. févr. 3 17:45:35 2021] igb: Copyright (c) 2007-2014 Intel Corporation.
[mer. févr. 3 17:45:35 2021] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[mer. févr. 3 17:45:35 2021] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[mer. févr. 3 17:45:35 2021] sky2: driver version 1.30
[mer. févr. 3 17:45:35 2021] VFIO - User Level meta-driver version: 0.3
[mer. févr. 3 17:45:35 2021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[mer. févr. 3 17:45:35 2021] ehci-pci: EHCI PCI platform driver
[mer. févr. 3 17:45:35 2021] ehci-platform: EHCI generic platform driver
[mer. févr. 3 17:45:35 2021] ehci-platform fe380000.usb: EHCI Host Controller
[mer. févr. 3 17:45:35 2021] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[mer. févr. 3 17:45:35 2021] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[mer. févr. 3 17:45:35 2021] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[mer. févr. 3 17:45:35 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[mer. févr. 3 17:45:35 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:35 2021] usb usb1: Product: EHCI Host Controller
[mer. févr. 3 17:45:35 2021] usb usb1: Manufacturer: Linux 5.9.14-rockchip64 ehci_hcd
[mer. févr. 3 17:45:35 2021] usb usb1: SerialNumber: fe380000.usb
[mer. févr. 3 17:45:35 2021] hub 1-0:1.0: USB hub found
[mer. févr. 3 17:45:35 2021] hub 1-0:1.0: 1 port detected
[mer. févr. 3 17:45:35 2021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[mer. févr. 3 17:45:35 2021] ohci-pci: OHCI PCI platform driver
[mer. févr. 3 17:45:35 2021] ohci-platform: OHCI generic platform driver
[mer. févr. 3 17:45:35 2021] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[mer. févr. 3 17:45:35 2021] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
[mer. févr. 3 17:45:35 2021] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[mer. févr. 3 17:45:35 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.09
[mer. févr. 3 17:45:35 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:35 2021] usb usb2: Product: Generic Platform OHCI controller
[mer. févr. 3 17:45:35 2021] usb usb2: Manufacturer: Linux 5.9.14-rockchip64 ohci_hcd
[mer. févr. 3 17:45:35 2021] usb usb2: SerialNumber: fe3a0000.usb
[mer. févr. 3 17:45:35 2021] hub 2-0:1.0: USB hub found
[mer. févr. 3 17:45:35 2021] hub 2-0:1.0: 1 port detected
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe900000
[mer. févr. 3 17:45:35 2021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[mer. févr. 3 17:45:35 2021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:35 2021] usb usb3: Product: xHCI Host Controller
[mer. févr. 3 17:45:35 2021] usb usb3: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
[mer. févr. 3 17:45:35 2021] usb usb3: SerialNumber: xhci-hcd.0.auto
[mer. févr. 3 17:45:35 2021] hub 3-0:1.0: USB hub found
[mer. févr. 3 17:45:35 2021] hub 3-0:1.0: 1 port detected
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[mer. févr. 3 17:45:35 2021] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[mer. févr. 3 17:45:35 2021] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[mer. févr. 3 17:45:35 2021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[mer. févr. 3 17:45:35 2021] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:35 2021] usb usb4: Product: xHCI Host Controller
[mer. févr. 3 17:45:35 2021] usb usb4: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
[mer. févr. 3 17:45:35 2021] usb usb4: SerialNumber: xhci-hcd.0.auto
[mer. févr. 3 17:45:35 2021] hub 4-0:1.0: USB hub found
[mer. févr. 3 17:45:35 2021] hub 4-0:1.0: 1 port detected
[mer. févr. 3 17:45:35 2021] usbcore: registered new interface driver usb-storage
[mer. févr. 3 17:45:35 2021] mousedev: PS/2 mouse device common for all mice
[mer. févr. 3 17:45:35 2021] i2c /dev entries driver
[mer. févr. 3 17:45:35 2021] pca953x 2-0020: using no AI
[mer. févr. 3 17:45:35 2021] rk808 0-001b: chip id: 0x0
[mer. févr. 3 17:45:35 2021] rk808-regulator rk808-regulator: there is no dvs0 gpio
[mer. févr. 3 17:45:35 2021] rk808-regulator rk808-regulator: there is no dvs1 gpio
[mer. févr. 3 17:45:35 2021] vdd_center: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vdd_cpu_l: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc_ddr_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc1v8_sys_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc1v8_dvp: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc3v0_touch: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc1v8_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
[mer. févr. 3 17:45:35 2021] vcc_sdio_s0: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcca3v0_codec: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc1v5_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcca1v8_codec: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc3v0_s3: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] vcc3v3_sys_s0: failed to get the current voltage(-517)
[mer. févr. 3 17:45:35 2021] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
[mer. févr. 3 17:45:35 2021] vcc3v3_s0: supplied by vcc3v3_sys_s3
[mer. févr. 3 17:45:35 2021] rk808-rtc rk808-rtc: registered as rtc0
[mer. févr. 3 17:45:35 2021] rk808-rtc rk808-rtc: setting system clock to 2021-02-03T16:45:36 UTC (1612370736)
[mer. févr. 3 17:45:35 2021] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[mer. févr. 3 17:45:35 2021] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[mer. févr. 3 17:45:35 2021] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[mer. févr. 3 17:45:35 2021] vdd_cpu_b: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[mer. févr. 3 17:45:35 2021] random: fast init done
[mer. févr. 3 17:45:35 2021] vdd_gpu: supplied by vcc5v0_sys
[mer. févr. 3 17:45:35 2021] dw_wdt ff848000.watchdog: No valid TOPs array specified
[mer. févr. 3 17:45:35 2021] sdhci: Secure Digital Host Controller Interface driver
[mer. févr. 3 17:45:35 2021] sdhci: Copyright(c) Pierre Ossman
[mer. févr. 3 17:45:35 2021] Synopsys Designware Multimedia Card Interface Driver
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[mer. févr. 3 17:45:35 2021] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[mer. févr. 3 17:45:35 2021] sdhci-pltfm: SDHCI platform and OF driver helper
[mer. févr. 3 17:45:35 2021] mmc1: CQHCI version 5.10
[mer. févr. 3 17:45:35 2021] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[mer. févr. 3 17:45:35 2021] ledtrig-cpu: registered to indicate activity on CPUs
[mer. févr. 3 17:45:35 2021] hid: raw HID events driver (C) Jiri Kosina
[mer. févr. 3 17:45:35 2021] usbcore: registered new interface driver usbhid
[mer. févr. 3 17:45:35 2021] usbhid: USB HID core driver
[mer. févr. 3 17:45:35 2021] drop_monitor: Initializing network drop monitor service
[mer. févr. 3 17:45:35 2021] NET: Registered protocol family 10
[mer. févr. 3 17:45:35 2021] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[mer. févr. 3 17:45:35 2021] Segment Routing with IPv6
[mer. févr. 3 17:45:35 2021] NET: Registered protocol family 17
[mer. févr. 3 17:45:35 2021] 8021q: 802.1Q VLAN Support v1.8
[mer. févr. 3 17:45:35 2021] Key type dns_resolver registered
[mer. févr. 3 17:45:35 2021] registered taskstats version 1
[mer. févr. 3 17:45:35 2021] Loading compiled-in X.509 certificates
[mer. févr. 3 17:45:35 2021] Loaded X.509 cert 'Build time autogenerated kernel key: dccf44bd6a6a6c80c8ebb43ecbfc03e645b516d0'
[mer. févr. 3 17:45:35 2021] zswap: loaded using pool lzo/zbud
[mer. févr. 3 17:45:35 2021] Key type ._fscrypt registered
[mer. févr. 3 17:45:35 2021] Key type .fscrypt registered
[mer. févr. 3 17:45:35 2021] Key type fscrypt-provisioning registered
[mer. févr. 3 17:45:35 2021] mmc1: mmc_select_hs200 failed, error -110
[mer. févr. 3 17:45:35 2021] mmc1: error -110 whilst initialising MMC card
[mer. févr. 3 17:45:35 2021] Btrfs loaded, crc32c=crc32c-generic
[mer. févr. 3 17:45:35 2021] Key type encrypted registered
[mer. févr. 3 17:45:35 2021] AppArmor: AppArmor sha1 policy hashing enabled
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[mer. févr. 3 17:45:35 2021] mmc1: mmc_select_hs200 failed, error -110
[mer. févr. 3 17:45:35 2021] mmc1: error -110 whilst initialising MMC card
[mer. févr. 3 17:45:35 2021] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[mer. févr. 3 17:45:35 2021] pci_bus 0000:00: root bus resource [bus 00-1f]
[mer. févr. 3 17:45:35 2021] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[mer. févr. 3 17:45:35 2021] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: supports D1
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: PME# supported from D3hot
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[mer. févr. 3 17:45:35 2021] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[mer. févr. 3 17:45:35 2021] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: PCI bridge to [bus 01]
[mer. févr. 3 17:45:35 2021] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[mer. févr. 3 17:45:35 2021] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[mer. févr. 3 17:45:35 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 239
[mer. févr. 3 17:45:35 2021] pcieport 0000:00:00.0: AER: enabled with IRQ 239
[mer. févr. 3 17:45:35 2021] ahci 0000:01:00.0: version 3.0
[mer. févr. 3 17:45:35 2021] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[mer. févr. 3 17:45:35 2021] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[mer. févr. 3 17:45:35 2021] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[mer. févr. 3 17:45:35 2021] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[mer. févr. 3 17:45:35 2021] scsi host0: ahci
[mer. févr. 3 17:45:35 2021] scsi host1: ahci
[mer. févr. 3 17:45:35 2021] scsi host2: ahci
[mer. févr. 3 17:45:35 2021] scsi host3: ahci
[mer. févr. 3 17:45:35 2021] scsi host4: ahci
[mer. févr. 3 17:45:35 2021] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 240
[mer. févr. 3 17:45:35 2021] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 241
[mer. févr. 3 17:45:35 2021] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 242
[mer. févr. 3 17:45:35 2021] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 243
[mer. févr. 3 17:45:35 2021] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 244
[mer. févr. 3 17:45:35 2021] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[mer. févr. 3 17:45:35 2021] of_cfs_init
[mer. févr. 3 17:45:35 2021] of_cfs_init: OK
[mer. févr. 3 17:45:35 2021] mmc1: mmc_select_hs200 failed, error -110
[mer. févr. 3 17:45:35 2021] mmc1: error -110 whilst initialising MMC card
[mer. févr. 3 17:45:35 2021] usb 3-1: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04
[mer. févr. 3 17:45:35 2021] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[mer. févr. 3 17:45:35 2021] usb 3-1: Product: USB2.0 Hub
[mer. févr. 3 17:45:35 2021] usb 3-1: Manufacturer: VIA Labs, Inc.
[mer. févr. 3 17:45:35 2021] hub 3-1:1.0: USB hub found
[mer. févr. 3 17:45:35 2021] hub 3-1:1.0: 4 ports detected
[mer. févr. 3 17:45:35 2021] mmc1: mmc_select_hs200 failed, error -110
[mer. févr. 3 17:45:35 2021] mmc1: error -110 whilst initialising MMC card
[mer. févr. 3 17:45:35 2021] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[mer. févr. 3 17:45:35 2021] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 210
[mer. févr. 3 17:45:35 2021] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[mer. févr. 3 17:45:35 2021] mmcblk0: mmc0:0001 ED4QT 119 GiB
[mer. févr. 3 17:45:35 2021] mmcblk0: p1
[mer. févr. 3 17:45:35 2021] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[mer. févr. 3 17:45:35 2021] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[mer. févr. 3 17:45:35 2021] usb 4-1: Product: USB3.0 Hub
[mer. févr. 3 17:45:35 2021] usb 4-1: Manufacturer: VIA Labs, Inc.
[mer. févr. 3 17:45:36 2021] hub 4-1:1.0: USB hub found
[mer. févr. 3 17:45:36 2021] hub 4-1:1.0: 4 ports detected
[mer. févr. 3 17:45:36 2021] usb 3-1.4: new high-speed USB device number 3 using xhci-hcd
[mer. févr. 3 17:45:37 2021] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[mer. févr. 3 17:45:37 2021] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[mer. févr. 3 17:45:37 2021] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[mer. févr. 3 17:45:37 2021] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[mer. févr. 3 17:45:37 2021] usb 4-1.4: Manufacturer: Realtek
[mer. févr. 3 17:45:37 2021] usb 4-1.4: SerialNumber: 000000001
[mer. févr. 3 17:45:45 2021] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[mer. févr. 3 17:45:45 2021] ata1.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:46 2021] ata1.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133
[mer. févr. 3 17:45:46 2021] ata1.00: 27344764928 sectors, multi 0: LBA48 NCQ (depth 32), AA
[mer. févr. 3 17:45:46 2021] ata1.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:46 2021] ata1.00: configured for UDMA/133
[mer. févr. 3 17:45:46 2021] scsi 0:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 5
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB)
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] 4096-byte physical blocks
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] Write Protect is off
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[mer. févr. 3 17:45:46 2021] sda: sda1
[mer. févr. 3 17:45:46 2021] sd 0:0:0:0: [sda] Attached SCSI disk
[mer. févr. 3 17:45:46 2021] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[mer. févr. 3 17:45:46 2021] ata2.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:46 2021] ata2.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133
[mer. févr. 3 17:45:46 2021] ata2.00: 27344764928 sectors, multi 0: LBA48 NCQ (depth 32), AA
[mer. févr. 3 17:45:46 2021] ata2.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:46 2021] ata2.00: configured for UDMA/133
[mer. févr. 3 17:45:46 2021] scsi 1:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 5
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB)
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] Write Protect is off
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[mer. févr. 3 17:45:46 2021] sdb: sdb1
[mer. févr. 3 17:45:46 2021] sd 1:0:0:0: [sdb] Attached SCSI disk
[mer. févr. 3 17:45:47 2021] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[mer. févr. 3 17:45:47 2021] ata3.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:47 2021] ata3.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133
[mer. févr. 3 17:45:47 2021] ata3.00: 27344764928 sectors, multi 0: LBA48 NCQ (depth 32), AA
[mer. févr. 3 17:45:47 2021] ata3.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:47 2021] ata3.00: configured for UDMA/133
[mer. févr. 3 17:45:47 2021] scsi 2:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 5
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB)
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] Write Protect is off
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[mer. févr. 3 17:45:47 2021] sdc: sdc1
[mer. févr. 3 17:45:47 2021] sd 2:0:0:0: [sdc] Attached SCSI disk
[mer. févr. 3 17:45:47 2021] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[mer. févr. 3 17:45:47 2021] ata4.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:47 2021] ata4.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133
[mer. févr. 3 17:45:47 2021] ata4.00: 27344764928 sectors, multi 0: LBA48 NCQ (depth 32), AA
[mer. févr. 3 17:45:47 2021] ata4.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:47 2021] ata4.00: configured for UDMA/133
[mer. févr. 3 17:45:47 2021] scsi 3:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 5
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB)
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] Write Protect is off
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[mer. févr. 3 17:45:47 2021] sdd: sdd1
[mer. févr. 3 17:45:47 2021] sd 3:0:0:0: [sdd] Attached SCSI disk
[mer. févr. 3 17:45:48 2021] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[mer. févr. 3 17:45:48 2021] ata5.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:48 2021] ata5.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133
[mer. févr. 3 17:45:48 2021] ata5.00: 27344764928 sectors, multi 0: LBA48 NCQ (depth 32), AA
[mer. févr. 3 17:45:48 2021] ata5.00: supports DRM functions and may not be fully accessible
[mer. févr. 3 17:45:48 2021] ata5.00: configured for UDMA/133
[mer. févr. 3 17:45:48 2021] scsi 4:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 5
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB)
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] 4096-byte physical blocks
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] Write Protect is off
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[mer. févr. 3 17:45:48 2021] sde: sde1
[mer. févr. 3 17:45:48 2021] sd 4:0:0:0: [sde] Attached SCSI disk
[mer. févr. 3 17:45:48 2021] Freeing unused kernel memory: 4224K
[mer. févr. 3 17:45:48 2021] Run /init as init process
[mer. févr. 3 17:45:48 2021] with arguments:
[mer. févr. 3 17:45:48 2021] /init
[mer. févr. 3 17:45:48 2021] with environment:
[mer. févr. 3 17:45:48 2021] HOME=/
[mer. févr. 3 17:45:48 2021] TERM=linux
[mer. févr. 3 17:45:48 2021] ubootpart=21825e31-01
[mer. févr. 3 17:45:48 2021] cgroup_enable=memory
[mer. févr. 3 17:45:48 2021] cgroup_memory=1
[mer. févr. 3 17:45:48 2021] input: adc-keys as /devices/platform/adc-keys/input/input1
[mer. févr. 3 17:45:48 2021] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[mer. févr. 3 17:45:48 2021] rockchip-vop ff900000.vop: Adding to iommu group 3
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[mer. févr. 3 17:45:48 2021] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[mer. févr. 3 17:45:48 2021] panfrost ff9a0000.gpu: clock rate = 500000000
[mer. févr. 3 17:45:48 2021] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[mer. févr. 3 17:45:48 2021] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[mer. févr. 3 17:45:48 2021] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[mer. févr. 3 17:45:48 2021] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[mer. févr. 3 17:45:49 2021] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[mer. févr. 3 17:45:49 2021] libphy: stmmac: probed
[mer. févr. 3 17:45:49 2021] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[mer. févr. 3 17:45:49 2021] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[mer. févr. 3 17:45:49 2021] random: crng init done
[mer. févr. 3 17:45:49 2021] async_tx: api initialized (async)
[mer. févr. 3 17:45:49 2021] md/raid:md0: device sde1 operational as raid disk 4
[mer. févr. 3 17:45:49 2021] md/raid:md0: device sdd1 operational as raid disk 3
[mer. févr. 3 17:45:49 2021] md/raid:md0: device sdc1 operational as raid disk 2
[mer. févr. 3 17:45:49 2021] md/raid:md0: device sdb1 operational as raid disk 1
[mer. févr. 3 17:45:49 2021] md/raid:md0: device sda1 operational as raid disk 0
[mer. févr. 3 17:45:49 2021] md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2
[mer. févr. 3 17:45:49 2021] md0: detected capacity change from 0 to 56001531215872
[mer. févr. 3 17:45:49 2021] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[mer. févr. 3 17:45:56 2021] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[mer. févr. 3 17:45:57 2021] systemd[1]: Inserted module 'autofs4'
[mer. févr. 3 17:45:57 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[mer. févr. 3 17:45:57 2021] systemd[1]: Detected architecture arm64.
[mer. févr. 3 17:45:57 2021] systemd[1]: Set hostname to <helios64>.
[mer. févr. 3 17:45:57 2021] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[mer. févr. 3 17:45:57 2021] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[mer. févr. 3 17:45:57 2021] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[mer. févr. 3 17:45:58 2021] systemd[1]: Listening on udev Kernel Socket.
[mer. févr. 3 17:45:58 2021] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[mer. févr. 3 17:45:58 2021] systemd[1]: Created slice system-serial\x2dgetty.slice.
[mer. févr. 3 17:45:58 2021] systemd[1]: Listening on initctl Compatibility Named Pipe.
[mer. févr. 3 17:45:58 2021] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[mer. févr. 3 17:45:58 2021] lm75 2-004c: hwmon2: sensor 'lm75'
[mer. févr. 3 17:45:59 2021] input: beeper as /devices/platform/beeper/input/input2
[mer. févr. 3 17:45:59 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0
[mer. févr. 3 17:45:59 2021] sd 1:0:0:0: Attached scsi generic sg1 type 0
[mer. févr. 3 17:45:59 2021] sd 2:0:0:0: Attached scsi generic sg2 type 0
[mer. févr. 3 17:45:59 2021] sd 3:0:0:0: Attached scsi generic sg3 type 0
[mer. févr. 3 17:45:59 2021] sd 4:0:0:0: Attached scsi generic sg4 type 0
[mer. févr. 3 17:45:59 2021] mc: Linux media interface: v0.10
[mer. févr. 3 17:45:59 2021] videodev: Linux video capture interface: v2.00
[mer. févr. 3 17:45:59 2021] rockchip-rga ff680000.rga: HW Version: 0x03.02
[mer. févr. 3 17:45:59 2021] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[mer. févr. 3 17:45:59 2021] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[mer. févr. 3 17:45:59 2021] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[mer. févr. 3 17:45:59 2021] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[mer. févr. 3 17:45:59 2021] [drm] unsupported AFBC format[3231564e]
[mer. févr. 3 17:45:59 2021] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[mer. févr. 3 17:45:59 2021] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[mer. févr. 3 17:45:59 2021] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[mer. févr. 3 17:45:59 2021] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[mer. févr. 3 17:45:59 2021] rkvdec ff660000.video-codec: Adding to iommu group 1
[mer. févr. 3 17:45:59 2021] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[mer. févr. 3 17:45:59 2021] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: irq 227, io mem 0xfe800000
[mer. févr. 3 17:45:59 2021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[mer. févr. 3 17:45:59 2021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:59 2021] usb usb5: Product: xHCI Host Controller
[mer. févr. 3 17:45:59 2021] usb usb5: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
[mer. févr. 3 17:45:59 2021] usb usb5: SerialNumber: xhci-hcd.3.auto
[mer. févr. 3 17:45:59 2021] hub 5-0:1.0: USB hub found
[mer. févr. 3 17:45:59 2021] hub 5-0:1.0: 1 port detected
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 6
[mer. févr. 3 17:45:59 2021] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[mer. févr. 3 17:45:59 2021] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[mer. févr. 3 17:45:59 2021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[mer. févr. 3 17:45:59 2021] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[mer. févr. 3 17:45:59 2021] usb usb6: Product: xHCI Host Controller
[mer. févr. 3 17:45:59 2021] usb usb6: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
[mer. févr. 3 17:45:59 2021] usb usb6: SerialNumber: xhci-hcd.3.auto
[mer. févr. 3 17:45:59 2021] hub 6-0:1.0: USB hub found
[mer. févr. 3 17:45:59 2021] hub 6-0:1.0: 1 port detected
[mer. févr. 3 17:45:59 2021] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[mer. févr. 3 17:45:59 2021] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[mer. févr. 3 17:45:59 2021] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[mer. févr. 3 17:45:59 2021] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
[mer. févr. 3 17:45:59 2021] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[mer. févr. 3 17:45:59 2021] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[mer. févr. 3 17:45:59 2021] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
[mer. févr. 3 17:45:59 2021] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.[mer. févr. 3 17:45:59 2021] usbcore: registered new interface driver r8152
[mer. févr. 3 17:46:00 2021] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[mer. févr. 3 17:46:03 2021] EXT4-fs (md0): recovery complete
[mer. févr. 3 17:46:03 2021] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[mer. févr. 3 17:46:03 2021] systemd[1]: Mounted /mnt/internal/raid.
[mer. févr. 3 17:46:03 2021] systemd[1]: Reached target Local File Systems.
[mer. févr. 3 17:46:03 2021] systemd[1]: Starting Armbian ZRAM config...
[mer. févr. 3 17:46:03 2021] systemd[1]: Starting Set console font and keymap...
[mer. févr. 3 17:46:03 2021] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[mer. févr. 3 17:46:03 2021] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[mer. févr. 3 17:46:03 2021] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
[mer. févr. 3 17:46:03 2021] systemd[1]: Starting Raise network interfaces...
[mer. févr. 3 17:46:03 2021] systemd[1]: Started Set console font and keymap.
[mer. févr. 3 17:46:03 2021] systemd[1]: Received SIGRTMIN+20 from PID 373 (plymouthd).
[mer. févr. 3 17:46:03 2021] zram: Added device: zram0
[mer. févr. 3 17:46:03 2021] zram: Added device: zram1
[mer. févr. 3 17:46:03 2021] zram: Added device: zram2
[mer. févr. 3 17:46:03 2021] zram0: detected capacity change from 0 to 1992257536
[mer. févr. 3 17:46:03 2021] Adding 1945560k swap on /dev/zram0. Priority:5 extents:1 across:1945560k SSFS
[mer. févr. 3 17:46:04 2021] zram1: detected capacity change from 0 to 52428800
[mer. févr. 3 17:46:04 2021] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[mer. févr. 3 17:46:04 2021] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[mer. févr. 3 17:46:05 2021] vcc5v0_typec: disabling
[mer. févr. 3 17:46:07 2021] systemd-journald[795]: Received request to flush runtime journal from PID 1
[mer. févr. 3 17:46:09 2021] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[mer. févr. 3 17:46:09 2021] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[mer. févr. 3 17:46:09 2021] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[mer. févr. 3 17:46:09 2021] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[mer. févr. 3 17:46:12 2021] broken atomic modeset userspace detected, disabling atomic
[mer. févr. 3 17:46:12 2021] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[mer. févr. 3 17:46:12 2021] Bridge firewalling registered
[mer. févr. 3 17:46:13 2021] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[mer. févr. 3 17:46:13 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[mer. févr. 3 17:46:13 2021] Initializing XFRM netlink socket
dmesg -T (during reboot after freeze)
the MMC errors are new
I don't know for the error about voltage that can't be read
edit : to be noted, i was still in "performance" mode for CPU governance, with same min/max possible values (here : https://forum.armbian.com/topic/16944-crazy-instability/ it is suggested to not be in that mode -> have just reverted to min possible value / max possible + powersave mode)
-
Ok i just applyed the suggested modifications this morning (by modifying the boot.cmd file + regenerating the boot.scr file).
Reboot has been OK.
Let's see ...
+ what exactly are these values / are they related to the CPU speed and if yes, how are they different than what is applyed when modifying the CPU governance configuration through armbian-config ?
Previous armbianEnv.txt (for reference) (untouched) :
```
verbosity=1
bootlogo=false
overlay_prefix=rockchip
rootdev=UUID=a79a14c0-3cf4-4fb9-a6c6-838571351371
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
```Previous boot.cmd file, for reference (modified as requested with the 4 new lines) :
```
# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#setenv load_addr "0x9000000"
setenv overlay_error "false"
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv rootfstype "ext4"
setenv docker_optimizations "on"
setenv earlycon "off"echo "Boot script loaded from ${devtype} ${devnum}"
if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
env import -t ${load_addr} ${filesize}
fiif test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,1500000 ${consoleargs}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fisetenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Imageload ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
fdt apply ${load_addr} || setenv overlay_error "true"
fi
done
for overlay_file in ${user_overlays}; do
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
fdt apply ${load_addr} || setenv overlay_error "true"
fi
done
if test "${overlay_error}" = "true"; then
echo "Error applying DT overlays, restoring original DT"
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-fixup.scr; then
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
source ${load_addr}
fi
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
echo "Applying user provided fixup script (fixup.scr)"
source ${load_addr}
fi
fi
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
``````
(...)
lrwxrwxrwx 1 root root 25 2021-01-10 14:30 uInitrd -> uInitrd-5.9.14-rockchip64
-rw-r--r-- 1 root root 3,2K 2021-02-01 09:13 boot.cmd
-rw-rw-r-- 1 root root 3,3K 2021-02-01 09:13 boot.scr
-rw-r--r-- 1 root root 166 2021-02-01 09:15 armbianEnv.txt
``` -
No (and i'm using MDADM, no ZFS), until now, hopefully (otherwise i'll get mad about losing time and datas just because of these errors ...) i haven't encountered broken raid or any errors (mdadm --misc detail is fine, no errors in dmesg -T, and so on).
Indeed maybe there are different problems ... anyway it's far away from being stable in the current state
Also i don't think i have overheat issue, my sensors are (even when copying files, ...) :
Quotelm75-i2c-2-4c
Adapter: rk3x-i2c
temp1: +37.4°C (high = +80.0°C, hyst = +75.0°C)cpu-virtual-0
Adapter: Virtual device
temp1: +46.2°C (crit = +100.0°C)tcpm_source_psy_4_0022-i2c-4-22
Adapter: rk3x-i2c
in0: +0.00 V (min = +0.00 V, max = +0.00 V)
curr1: +0.00 A (max = +0.00 A)gpu-virtual-0
Adapter: Virtual device
temp1: +46.2°C (crit = +95.0°C)
-
@Seneca
I would suggest to upgrade to kernel 5.9.14 : i have freezes with both, but i had way more freezes with 5.8.14 compared to 5.9.14
Otherwise, on my side, it is 100% clear that in my situation the freezes are not related to disk I/O : i have nearly nothing in crontab, and i'm encountering some freezes during the night, with 0 CPU activity / 0 disk usage (and as said before, i have nearly no processes configured outside MDADM, SSH, and NETDATA).
-
I would be fine with this solution on my side if it was working
(but on my side it's not enough to have same freq. for min and max value (also with 1.8 Ghz, i haven't tryed with lower values) + "performance" or "governor" mode.
-
Yes, as stated in previous message, i tried "conservative" and then "performance" governor mode (which i'm still running on), with same (max) values for both min/max CPU speed, without any real benefits (maybe this is enough for some users, but clearly not in my situation).
And i really don't have a lot of things installed : SMB, SSH, docker (with one container : netdata), MDADM, and that's all (no extra containers, no OMV, ...). And no "load" from a CPU point of view, and not a lot of RAID I/O (at least not during most of the crashes).
And same, i'm not always in a setup with a usb cable connected (but i would suspect these freezes to be the same ones than the first i encountered and for which some traces are at the beginning of this post).
Helios64 - freeze whatever the kernel is.
in Rockchip
Posted
Well, my HELIOS64 board died a long time ago (with no possible replacment), but before that, about the freezes :
- in the end the root cause of the problem has never been corrected, but had been identified at some point in time as being related to the CPU freq changes / governance
- hence the workaround about stabilizing the board with a fixed governance and a lower speed of 1.2Ghx
- as far as i remember, this was nearly allowing to not encounter the issue anymore
(not sure however what you are calling "DSF" + this had nothing to do with disks - SSD or regular HDD)