Hi,
I am using Linux nanopiair 3.4.113-sun8i distribution on my Nano Pi Neo Air and trying to get the g_ether works.
After using modprobe g_ether and set up the network/interfaces
auto usb0
iface usb0
inet static address 192.168.0.2
netmask 255.255.255.0
then edit /etc/modprobe.d/g_ether.conf:
options g_ether host_addr= 06:7b:95:4c:59:d7
After reboot it shows:
[ 6.868451] usb0: MAC 06:7b:95:4c:59:d7
[ 6.868475] usb0: HOST MAC 5e:5b:65:8f:94:85
[ 11.484526] systemd[1]: Found device /sys/subsystem/net/devices/usb0.
[ 16.249726] ADDRCONF(NETDEV_UP): usb0: link is not ready
in this case my PC can not recognize the usb driver when I plug my nano Pi after I set up the DHCP server on the Nano Pi.
I do not know if it relates to [ 16.249726] ADDRCONF(NETDEV_UP): usb0: link is not ready
Hi, I am using Linux nanopiair 3.4.113-sun8i distribution on my Nano Pi Neo Air and trying to get the g_ether works. After using modprobe g_ether and set up the network/interfaces auto usb0 iface usb0 inet static address 192.168.0.2 netmask 255.255.255.0 then edit /etc/modprobe.d/g_ether.conf: options g_ether host_addr= 06:7b:95:4c:59:d7 After reboot it shows: [ 6.868451] usb0: MAC 06:7b:95:4c:59:d7 [ 6.868475] usb0: HOST MAC 5e:5b:65:8f:94:85 [ 11.484526] systemd[1]: Found device /sys/subsystem/net/devices/usb0. [ 16.249726] ADDRCONF(NETDEV_UP): usb0: link is not ready in this case my PC can not recognize the usb driver when I plug my nano Pi after I set up the DHCP server on the Nano Pi. I do not know if it relates to [ 16.249726] ADDRCONF(NETDEV_UP): usb0: link is not ready