Jump to content

Mickynuts

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by Mickynuts

  1. Hi sorry for that question. I am running the last image on mega with TX6-P (H6) with 16go Emmc. i want to copy the sd card to emmc. I am using ddbr for backup. but the speed is 0.0 byte. if i just want to install with the script "install-aw-sh" in the root directory. The result is the same. With Iostat or Nmon, the activity is zero. after 2 hours the file created with install-aw.sh is of size 0 (no error) but i kill process. Can someone help me ? have you encountered the same problem? I run with the 5.7.7-aw-h6-tv kernel uname -r see: Linux aw-h6-tv 5.7.7-aw-h6-tv # 20.07 SMP PREEMPT Thu Jul 9 09:38:18 MSK 2020 aarch64 aarch64 aarch64 GNU / Linux see picture and i have past the dmesg in dmesg.txt other image work on emmc ? dmesg.txt
  2. hi guy. Thanx for this image. its work with my Tanix Tx6. but have question. you have solution for work with Front LED LCD FD650B-S. I want to see time on it or other data. you can help me for grab tools or anyone maked code or app ?
  3. Hello everyone :-). I would like help, I checked on the Web and I found using the forum a script (that I modified) to trigger using DTS LEDs. I adapted the script found here at the end of the page: Topic 112-dtb-howto-add-leds I think that for the section "disk-activity" and "netdev" it misses options but I'm not a developer just a scheming. Can you please explain to me how to add options to the mentioned trigger? I searched a lot of time but did not find any information. Here is my script, everything works fine (compiled with armbian-add-overlay), but "disk-activity" and "netdev" do not work. I tested the write / read trigger on disk but did not work either. Can you explain to me how to add the (device) options for disk-activity (with usb-nand-sata on / dev / sda) and netdev (for eth0)? thank you for the one who can help me to understand or to work this script. My card is OrangePi PC2 H5 1GB Sorry for bad english, my mother language is french. (this message is translatted in english from french) here is my script: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h5"; fragment@0 { target = <&pio>; __overlay__ { gpio_pin: gpio_pin { pins = "PA19","PA7","PA8","PA9","PA10","PD11","PA6","PA1","PA0","PA3"; function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { gpiopull: gpiopull { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&gpio_pin>; status = "okay"; gpio_out_19 { label = "P19:orange:wifiRx"; gpios = <&pio 0 19 0>; linux,default-trigger = "phy0rx"; }; gpio_out_7 { label = "P7:red:wifiTX"; gpios = <&pio 0 7 0>; default-state = "om"; linux,default-trigger = "phy0tx"; }; gpio_out_8 { label = "P8:orange:wifiConnect"; gpios = <&pio 0 8 0>; linux,default-trigger = "phy0assoc"; }; gpio_out_9 { label = "P9:green:wifiDetectUSB"; gpios = <&pio 0 9 0>; linux,default-trigger = "phy0radio"; }; gpio_out_10 { label = "P10:blue:cpuOnline"; gpios = <&pio 0 10 0>; linux,default-trigger = "cpu"; }; gpio_out_11 { label = "P11:white:Act"; gpios = <&pio 3 11 0>; linux,default-trigger = "activity"; }; gpio_out_0 { label = "P0:mmc0"; gpios = <&pio 0 0 0>; linux,default-trigger = "mmc0"; }; gpio_out_1 { label = "P1:disk-activity"; gpios = <&pio 0 1 0>; linux,default-trigger = "disk-activity"; }; gpio_out_3 { label = "P3:etherLink1gbps"; gpios = <&pio 0 3 0>; linux,default-trigger = "0.2:01:1Gbps"; }; gpio_out_6 { label = "P6:cpuled"; gpios = <&pio 0 6 0>; linux,default-trigger = "netdev"; }; }; }; }; }; addDTBTest2.dts
  4. hi Alexandr Cherkashin, many thankx for you. with the help of your code i have make final code for control led from trigger event. many thanks for sharing with us
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines