Jump to content


  • Posts

  • Joined

  • Last visited

 Content Type 


Member Map




Posts posted by SHA_ndy

  1. 6 hours ago, Heisath said:


    You will have to check the home-assistant documentation on how to remove it completely.   

    armbian-config/softy does not have a remove feature build in.


    See also:



    Thanks for your reply. I realized that docker was also installed when installing home assistant so I completely removed docker (by "apt remove docker-ce*") and did a "find" with *hass*. Afterward I removed all found *hass*-files manually. Worked fine.

  2. I'm sorry but I have a backup running now because I need my server for different services atm, but I will try again tomorrow or tuesday and can provide log then. Can you tell me how to grab a log? I'm not familiar with that.


    I upgraded from jessie 5.23 if that scenario can be tested, too.

    andy@orangepipc:~$ sudo dpkg-query -W -f='${Version}\n' linux-jessie-root-orangepipc
    [sudo] password for andy:


  3. Hi all,


    my orange pi pc ran into a bootloop after upgrading to 5.25...


    Here is the output of apt-get upgrade (1 package has been kept back, I don't know why):

    andy@orangepipc:~$ sudo apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Calculating upgrade... Done
    The following packages have been kept back:
    The following packages will be upgraded:
      armbian-firmware armbian-tools-jessie hostapd libgd3 linux-headers-sun8i linux-image-sun8i
      linux-u-boot-orangepipc-default sunxi-tools
    8 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
    Need to get 20.7 MB of archives.
    After this operation, 3,171 kB of additional disk space will be used.

    After performing the upgrade the orange is stuck in a bootloop...

  4. I also tried to use teamviewer on armbian but failed. I now use logmein hamachi for connections to my orange from outside my home network. You have to install client software on both sides and then you can add your computer at school to your network, connection is via vpn. You could then simply use remotedesktop like VNC...





    Refer to these articles when running on arm devices:








    Good luck

  5. Hi all,


    I'm not very familiar with linux scripting especially for controlling GPIO on Orange Pi. So my question is: is it possible to connect a fan to a GPIO port that is activated when temperature goes above a given value? Does anyone have a script for that or can suggest how to get it done?

    I have a plastic housing for the board and a fan attached to it that is constantly running. But for 95% of the time I don't have load on the pi and don't need the fan...



    Thanks in advance

  • Create New...