ebalcsk

yes thank you

Hello Sorry it was my fault The IO PIN layout 180' was rotated. Used a wrong PIN. Thank you for your help

root@orangepioneplus:~# dtc -@ -I dtb -O dts -o /root/sun50i-h6-orangepi-one-plus.dts-5.10.12 /boot/dtb/allwinner/sun50i-h6-orangepi-one-plus.dtb /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@480000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@720000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@816000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@888000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1080000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1320000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1488000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1608000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1704000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (unit_address_vs_reg): /cpu-opp-table/opp@1800000000: node has a unit name, but no reg property /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (graph_child_address): /soc/tcon-top@6510000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary /root/sun50i-h6-orangepi-one-plus.dts-5.10.12: Warning (graph_child_address): /soc/tcon-top@6510000/ports/port@4: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary root@orangepioneplus:~# sun50i-h6-orangepi-one-plus.dts-5.10.12

root@orangepioneplus:~# uname -r 5.10.12-sunxi64

it looks like exist: root@orangepioneplus:~# ll /proc/device-tree/soc/serial@5000c00 total 0 -r--r--r-- 1 root root 8 Feb 10 21:50 clocks -r--r--r-- 1 root root 17 Feb 10 21:50 compatible -r--r--r-- 1 root root 12 Feb 10 21:50 interrupts -r--r--r-- 1 root root 7 Feb 10 21:50 name -r--r--r-- 1 root root 4 Feb 10 21:50 phandle -r--r--r-- 1 root root 4 Feb 10 21:50 pinctrl-0 -r--r--r-- 1 root root 8 Feb 10 21:50 pinctrl-names -r--r--r-- 1 root root 8 Feb 10 21:50 reg -r--r--r-- 1 root root 4 Feb 10 21:50 reg-io-width -r--r--r-- 1 root root 4 Feb 10 21:50 reg-shift -r--r--r-- 1 root root 8 Feb 10 21:50 resets -r--r--r-- 1 root root 5 Feb 10 21:50 status root@orangepioneplus:~#

Hello, I try to communicate on UART3 (pin 11/13) just TTL, but cannot see any data on the lines. After first attempt i added overlays=uart3 to /boot/armbianEnv.txt and rebooted the system. oot@orangepioneplus:~# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=d7bd3629-b17f-4c85-9031-909157a0ce7e rootfstype=ext4 overlays=uart3 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Then i also executed update-initramfs -u and rebooted the board. None of these are helped I wonder what i am doing wrong? I see the following in the logs: root@orangepioneplus:~# dmesg | egrep --color 'serial|ttyS' [ 1.944312] printk: console [ttyS0] disabled [ 1.944394] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 31, base_baud = 1500000) is a 16550A [ 1.944599] printk: console [ttyS0] enabled [ 1.945269] sun50i-h6-pinctrl 300b000.pinctrl: pin-119 (5000c00.serial) status -517 [ 1.945284] dw-apb-uart 5000c00.serial: Error applying setting, reverse things back [ 1.971491] sun50i-h6-pinctrl 300b000.pinctrl: pin-119 (5000c00.serial) status -517 [ 1.971505] dw-apb-uart 5000c00.serial: Error applying setting, reverse things back [ 1.973846] sun50i-h6-pinctrl 300b000.pinctrl: pin-119 (5000c00.serial) status -517 [ 1.973860] dw-apb-uart 5000c00.serial: Error applying setting, reverse things back [ 1.975764] sun50i-h6-pinctrl 300b000.pinctrl: pin-119 (5000c00.serial) status -517 [ 1.975778] dw-apb-uart 5000c00.serial: Error applying setting, reverse things back [ 2.376127] sun50i-h6-pinctrl 300b000.pinctrl: pin-119 (5000c00.serial) status -517 [ 2.376141] dw-apb-uart 5000c00.serial: Error applying setting, reverse things back [ 2.401927] 5000c00.serial: ttyS3 at MMIO 0x5000c00 (irq = 32, base_baud = 1500000) is a 16550A [ 5.035583] systemd[1]: Created slice system-serial\x2dgetty.slice. I think it is looks okey. Also i can connect to UART0. During testing i used the same setting on minicom as UART0 +-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyS3 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 9600 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+ Also just done a same test with a USB-serial adapter which is worked so i can rule out at least problem with my testing mythology. Thank you!

Hello, I am using a orangepi one plus, but that might be no connection with my issue. I am having the following network configuration: # Network is managed by Network manager auto lo iface lo inet loopback allow-hotplug eth0 eth0.1 eth0.10 auto eth0 iface eth0 inet manual pre-up ifconfig $IFACE up post-down ifconfig $IFACE down auto eth0.1 iface eth0.1 inet static address 192.168.1.250 netmask 255.255.255.0 gateway 192.168.1.1 auto eth0.10 iface eth0.10 inet static address 192.168.10.1 netmask 255.255.255.0 if i disconnect the network cable and connect back the interface is not come up automatically from the state it is loks like up (docker interfaces are omitted): eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 46188 bytes 4058716 (3.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5741 bytes 592928 (579.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 eth0.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 54 bytes 3950 (3.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 80 bytes 7233 (7.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0.10: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 10603 bytes 611155 (596.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 184 bytes 14270 (13.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 but cannot ping if i restart the interfaces connection is restored ifdown eth0.10 ifdown eth0.1 ifdown eth0 ifup eth0 ifup eth0.1 ifup eth0.10 interface output looks the same: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 49742 bytes 4332006 (4.1 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6201 bytes 637517 (622.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 eth0.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.250 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::7:e8ff:fe23:49f2 prefixlen 64 scopeid 0x20<link> ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 61 bytes 4730 (4.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 155 bytes 12779 (12.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0.10: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.1 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::7:e8ff:fe23:49f2 prefixlen 64 scopeid 0x20<link> ether 02:07:e8:23:49:f2 txqueuelen 1000 (Ethernet) RX packets 1844 bytes 135220 (132.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 235 bytes 18193 (17.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I wonder what is the problem? Thank you

Hello Igor, Sorry tho bord is "Orange Pi one +" yesterday i left out a one. Yes i found that one and tryed it. /boot/armbianEnv.txt line overlays=analog-codec but unfourtunatly didnt worked. Also tryed a couple of other thing. When i arrived home will attach a log's. thanks Balazs

Hello, I wonder how to use built in microphone on Orange Pi one +? root@orangepioneplus:~# arecord -l arecord: device_list:272: no soundcards found... Thanks