barry2212

Hello, I'm planning on building a network router with the Orange Pi Zero Plus, similar to the Raspberry Pi diagram below, but I'm not sure if the Orange Pi supports Vlan. If so, how do I implement it into my OpenWrt image? Thank you all.

Hi all, recently searching on how to connect raspberry pi 3.5 inches TFT display (wave share 's clone) .And lucky for me, i have success to make the display show up the console( according to this post ) Sorry for my bad English Thanks for reading this

Hi,after search around the internet i found out that is nearly impossible to enable I2s interface with new armbian kernel so searching a little bit more i found another solution that i have to rebuilt another armbian kernel by my own to enable but i don't know how. So I'm writing this to ask every pro member in this forum to show me the way or guide me to make the i2s interface success. Thanks all for reading this. P/s sorry for my bad English

Thanks for your suggestion :)))

i have a another problem that wish to be helped that i try to play the cd with mplayer but i cant get the audio out cause unlike the orange pi zero it doesnt have analog audio out so i move on to the orange pi zero.But now this problem came in. So do you know how to get the audio out of the board.That would be great

This is a little bit confuse cause my orange pi one detect the device and it have the /dev/cdrom and the orange pi zero is not

Here is my termian output about the usb cd drive: [ 92.009005] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 92.166692] usb 3-1: New USB device found, idVendor=05e3, idProduct=0701, bcdDevice= 0.33 [ 92.166710] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 92.166720] usb 3-1: Product: USB TO IDE [ 92.167854] usb-storage 3-1:1.0: USB Mass Storage device detected [ 92.168274] usb-storage 3-1:1.0: Quirks match for vid 05e3 pid 0701: 520 [ 92.168447] scsi host0: usb-storage 3-1:1.0 [ 93.277422] scsi 0:0:0:0: CD-ROM TEAC DW-224E-V C.CC PQ: 0 ANSI: 0 [ 93.278267] scsi 0:0:0:0: Attached scsi generic sg0 type 5

Hi, I'm the new guy and I started use orange pi boards so go straight to the problem: I'm trying to turn my orange pi plus board into a fully function cd player.I have done the code. So when I try to connect the USB cd drive to the board and type:"ls /dev/cdrom" And it shown "ls: cannot access '/dev/cdrom': No such file or directory" that happened to "sr0" too. I don't know how to solve this Please help me.Thanks for reading this