Trying to get the NanoPi Neo Air boot from EMMC,
Did the following steps:
1- nand-sata-install
2- boot from eMMC / NAND, system on eMMC/NAND
3- Shutdown, and remove sd card, and reboot.
4- Get stuck in uboot.
Any helps appreciated. Thanks
This is what I get during boot:
U-Boot SPL 2019.04-armbian (Jul 16 2019 - 00:07:29 +0200)
DRAM: 512 MiB
Trying to boot from MMC2
U-Boot 2019.04-armbian (Jul 16 2019 - 00:07:29 +0200) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi NEO Air
DRAM: 512 MiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from EXT4... MMC: no card present
In: serial
Out: serial
Err: serial
Net: No ethernet found.
starting USB...
No controllers found
Autoboot in 1 seconds, press <Space> to stop
Card did not respond to voltage select!
MMC: no card present
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
starting USB...
No controllers found
No ethernet found.
No ethernet found.
=>