I have a Z69 3/32 GB, which hangs on S905X logo at boot. I tried different debian/ubuntu images and DTBs. Instead it boots CoreELEC just fine with "gxl_p212_3g.dtb", but this DTB does not work with armbian.
There is this post, which says, it boots without a DTB, I cannot confirm this. I tried all "gxl-s905x-..." DTBs in /dtb, none of them does work. Tested with different USB-Sticks and SD-Cards.
edit: I bought this device used, CE was already installed to flash, may this be the problem? Flashed stock Android ROM
edit2: tried again after new method you mentioned in "S9xxx kernel 4.1x (>= ver 5.55)", it now works with DTB "meson-gxl-s905x-p212.dtb" set in "uEnv.ini"
ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)
in General Chat
Posted
Hi, at first: thanks for your effort!
I have a Z69 3/32 GB, which hangs on S905X logo at boot. I tried different debian/ubuntu images and DTBs. Instead it boots CoreELEC just fine with "gxl_p212_3g.dtb", but this DTB does not work with armbian.
There is this post, which says, it boots without a DTB, I cannot confirm this. I tried all "gxl-s905x-..." DTBs in /dtb, none of them does work. Tested with different USB-Sticks and SD-Cards.
These are the images I tried so far:
I would be grateful for any hint!
edit: I bought this device used, CE was already installed to flash, may this be the problem?Flashed stock Android ROMedit2: tried again after new method you mentioned in "S9xxx kernel 4.1x (>= ver 5.55)", it now works with DTB "meson-gxl-s905x-p212.dtb" set in "uEnv.ini"