Darkyere

Members
  • Content Count

    10
  • Joined

  • Last visited

  1. Ty for pointing me in the right direction. I found this site and it explained what to do. So i choose the current branch and now everything looks like this cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepizeroplus BOARD_NAME="Orange Pi Zero Plus" BOARDFAMILY=sun50iw2 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=eb9dad92 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=20.05.2 LINUXFAMILY=sunxi64 BRANCH=current ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster uname -a Linux orangepizeroplus 5.4.43-sunxi64 #20.05.2 SMP Tue Jun 2 17:20:17 CEST 2020 aarch64 GNU/Linux So i think everything is as it should be. Ty for your time, Darkyere
  2. Is that under Armbian-config -> System Settings -> Other (Switch to other kernels) And then just pick the newest version. Or do i go about it some where else i armbian-config?
  3. I have an OPZ+ server with Armbian buster that has the following information cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepizeroplus BOARD_NAME="Orange Pi Zero Plus" BOARDFAMILY=sun50iw2 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=c865c065-dirty VERSION=5.91 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster uname -a Linux orangepizeroplus 4.19.63-sunxi64 #5.92 SMP Fri Aug 2 00:18:27 CEST 2019 aarch64 GNU/Linux ---- I see on the download page of Armbian OPZ+ That there is a new version of Armbian out. Armbian_20.05.2_Orangepizeroplus_buster_current_5.4.43.img.xz As you can see i am currently running the 4.19 kernel and version 5.91 of Armbian. ---- How do i go around to upgrade my current Armbian to the Newest version of Armbian. As in upgrade or similar. I dont wish to reinstall to much work in that. ---- Ty for reading, Darkyere
  4. BTW, i appreciate all the help just decided it wasn't worth it for me to take the chance and up the CPU freq because of the chance of damaging the device. But i really appreciate the help and effort all. TY for your time. Best regards, Darkyere
  5. I appreciate a lot the attempt from you Guidol. And its good to know it wont work that way. The info from 5kft is also a interesting. Seems like there is missing a MOSFET power regualor which is why Armbian cant clock it to 1.2Ghz. I read the post 5kft mentioned and it seems like that the official Ubuntu image for Orange Pi Zero Plus can make it run at 1.2 Ghz. So just an attempt i will try to burn the Official Image to another SDCard and see if it runs at 1.2Ghz. Then i will take it from there not sure what the result will be. Unfortunately i wont be home until Saturday so i probably wont be able to test it until then.
  6. Since i have never tried this before just to be sure. The overlays i have to delete is cpu-clock-1.3Ghz-1.3v gpio-regulator-1.3v and then proceed ?
  7. Unfortunately my device froze on next reboot and i had to delete the overlay from the armbianEnv.txt file. It's just weird i don't seem to be the only one who have had this issue with a OPIZ+ looking through the net i found OrangePi PC CPU Frequency Where at the bottom of the post one like me originally had 1200Mhz and after kernel update got 1008Mhz. Is it possible its related to something else ? Boot info from TTL looked like U-Boot SPL 2019.04-armbian (Jul 16 2019 - 11:01:14 +0200) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL31: v2.1(debug):3ce3ce0-dirty NOTICE: BL31: Built : 17:00:24, Jul 15 2019 NOTICE: BL31: Detected Allwinner H5 SoC (1718) NOTICE: BL31: Found U-Boot DTB at 0x40899e0, model: Xunlong Orange Pi Zero Plus INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller NOTICE: BL31: PMIC: Defaulting to PortL GPIO according to H5 reference design. INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2019.04-armbian (Jul 16 2019 - 11:01:14 +0200) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: Xunlong Orange Pi Zero Plus DRAM: 512 MiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: No ethernet found. ** Reading file would overwrite reserved memory ** There is no valid bmp file at the given address starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3042 bytes read in 2 ms (1.5 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 236 bytes read in 1 ms (230.5 KiB/s) 28217 bytes read in 10 ms (2.7 MiB/s) 898 bytes read in 5 ms (174.8 KiB/s) Applying kernel provided DT overlay sun50i-h5-cpu-clock-1.3GHz-1.3v.dtbo 1020 bytes read in 4 ms (249 KiB/s) Applying kernel provided DT overlay sun50i-h5-gpio-regulator-1.3v.dtbo 504 bytes read in 4 ms (123 KiB/s) Applying kernel provided DT overlay sun50i-h5-usbhost2.dtbo 504 bytes read in 4 ms (123 KiB/s) Applying kernel provided DT overlay sun50i-h5-usbhost3.dtbo 4155 bytes read in 3 ms (1.3 MiB/s) Applying kernel provided DT fixup script (sun50i-h5-fixup.scr) ## Executing script at 44000000 7867316 bytes read in 386 ms (19.4 MiB/s) 14311432 bytes read in 699 ms (19.5 MiB/s) ## Loading init Ramdisk from Legacy Image at 4fe00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 7867252 Bytes = 7.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4987f000, end 49fffb74 ... OK Loading Device Tree to 000000004980f000, end 000000004987efff ... OK Starting kernel ... Loading, please wait... Starting version 241 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: recovering journal /dev/mmcblk0p1: clean, 56098/936448 files, 586337/3839744 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to Debian GNU/Linux 10 (buster)! [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket. Starting Nameserver information manager... [ OK ] Reached target Remote File Systems. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Slices. [ OK ] Reached target System Time Synchronized. Mounting Huge Pages File System... Starting Set the console keyboard layout... Starting Load Kernel Modules... [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Reached target Swap. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Syslog Socket. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. Starting Create list of re…odes for the current kernel... [ OK ] Created slice system-openvpn.slice. Starting Restore / save the current clock... Mounting Kernel Debug File System... Mounting POSIX Message Queue File System... [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... Starting Uncomplicated firewall... [ OK ] Reached target Paths. [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Mounted Huge Pages File System. [ OK ] Started Set the console keyboard layout. [ OK ] Started Create list of req… nodes for the current kernel. [ OK ] Started Restore / save the current clock. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Nameserver information manager. Starting Load/Save Random Seed... Starting Create System Users... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... [ OK ] Started Journal Service. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. Starting Flush Journal to Persistent Storage... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Armbian ZRAM config... Starting Raise network interfaces... Starting Create Volatile Files and Directories... Starting Set console font and keymap... [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Started udev Kernel Device Manager. [ OK ] Found device /dev/ttyGS0. [ OK ] Started Update UTMP about System Boot/Shutdown. [ 9.593791] Unable to handle kernel paging request at virtual address 0000801 e0f258010 Thanks both for giving it a got would like those 20% extra speed.
  8. I changed it and my /boot/armbianEnv.txt added overlays=gpio-regulator-1.3v usbhost2 usbhost3 And i felt happy that it rebooted an is running with this new setting. But unfortuantely the bord is still maximum clocked at 1008Mhz. Changing /etc/default/cpufrequtils doenst help and going into armbian-config doesnt give me higher options but 1008Mhz Do you have any clue what could be the reason? And what our next step would be ?
  9. It is great to hear that it is not the kernel and that a solution might be available already now. So if I get it correctly I go into armbian-config > software > hardware # And enable gpio-regulator-1.3v That is the only option in that category that has something related to regulator. And if you say that is the one I will enable it and reboot. I appreciate the quick respond. Unfortunately I wont be home until Wednesday so I wont be able to really test it until then. Not taking any chances and risking to make it unbootable with 48 hours till I can physically access it
  10. About 3 months ago i bought the Orange PI Zero Plus Orange Pi Zero Plus I installed Armbian Stretch and started playing around. I noticed that it got up to 71c which was to much so i shut it down and went on the net to buy some 5v fans to cool it. A month ago I received the first fans and noticed now that Armbian Buster had arrived. Since I hadn't gotten far with the config of Armbian Stretch I started on a new image. But to my disappointment the ARM processor is now clocked to 1008Mhz and not the 1.2Ghz the device is set to by manufacturer. I can guess that it is because of the heat problem that it is now set to 1008Mhz. The problem is through armbian-config there is no longer any an 1.2Ghz option only 1008Mhz . And setting nano /etc/default/cpufrequtils service cpufrequtils restart Doesn't change the actual speed from 1Ghz to 1.2Ghz Some info My kernel is uname -a Linux orangepizeroplus 4.19.63-sunxi64 #5.92 SMP Fri Aug 2 00:18:27 CEST 2019 aarch64 GNU/Linux My /etc/default/cpufrequtils looks like # WARNING: this file will be replaced on board support package (linux-root-...) upgrade ENABLE=true MIN_SPEED=480000 MAX_SPEED=1010000 GOVERNOR=ondemand And cpufreq-info shows hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 480 MHz, 648 MHz, 816 MHz, 960 MHz, 1.01 GHz I suppose it's the kernel which decides what is allowed. And I do get that it will keep the heat down and that setting it to 1008Mhz as default is a good idea. But I was hoping to get the option back to choose 1.2Ghz even if it should default to 1008Mhz now where I have bought both 5v fans and NPN transistors to make a little ARM fan for my OPZ+. Ty for reading and best regards, Darkyere