congtm

Thank you so much! I will try again with h3droid_installer.img.xz file. Furthermore, I know that android box tv r69 have more PCB versions. My board using Allwinner sun8iw7p1 (max 1008 MHz), ram 1GB ddr2 (Max 400MHz), NAND 8GB. It is a blue board. Code on board is "R69-8X4XDDR3_V2.0", "2018-04-08". But data log default about ram is ram 1GB ddr2.

Dear you, Thank you for your helps. Lot's of other differences from the pics. I think that, too. So, my board can't boot images. I know this link: https://github.com/karabek/SunvellR69 https://github.com/armbian/build It is open source code link. I can get and rebuild it. But it is very difficult to change config in source code to apply for my board correctly. Thank you.

Dear you, I think your board and my board is different version. I having a blue board. Below is picture about it. It using Allwinner sun8iw7p1 (max 1008 MHz), ram 1GB ddr2 (Max 400MHz), NAND 8GB (dolphin-fvd-p1). How is your board? Excuseme! Do you get image directly and burn to sdcrad? Or do you rebuild from open source code? I think we have to config about dram (speed clock,etc...) correctly. After that, we can re build open source code, to get new image.

Dear you, I have just tried h3droid_installer.img.xz. Use tool 'Etcher' or use dd command to burn image to my sdcard. My sdcard which I tried all. - sandisk sd card class 4 , 8GB. - sandisk sd card extreme pro class 10, 16GB. - samsung evo plus class 10, 32GB. My OS is ubuntu 18.04 LTS. But, I have the same error. U-Boot SPL 2017.07-00494-g19d1f1a2f3-dirty (May 30 2019 - 18:01:48) DRAM: 0 MiB ### ERROR ### Please RESET the board ### Can you check it to help me, please? Below is log booting default on my board, not use sdcard on board. log_r69_default.txt

log_r69_default.txt Dear raschid, Did you try that image on your android box tv r69 , Allwinner sun8iw7p1, ram 1GB, NAND 8GB (dolphin-fvd-p1)? Because I got below error on my board. I'm tried: - sandisk sd card class 4 , 8GB. - sandisk sd card extreme pro class 10, 16GB. - samsung evo plus class 10, 32GB. Burn tool: Etcher or use dd command. "U-Boot SPL 2019.04-armbian (Oct 23 2019 - 21:32:04 +0200) DRAM: 0 MiB ### ERROR ### Please RESET the board ###" Below is log booting default on my board, not use sdcard on board. Can you check it, please? log_r69_default.txt

Dear TheLinuxBug, I want ask you clearly. Can you, please? Below is some thing which i need install, isn't it? https://h3droid.com/download Step 1: Download h3droid_installer-1.3.5.tar. Step 2: Extract the tar archive (tar -xf filename.tar) in a folder with enough space to hold the contents (~450MB) Step 3: Update 00_conf file to set OUTDEV variable. It should contain either device or plain file path (ex: OUTDEV=/dev/mmcblkX or OUTDEV=/dev/sdX or OUTDEV=/some/path/to/somefile.img) Step 4: Copy your PUBLIC SSH key(s) to the install folder (ex: cp /root/.ssh/mykey.pub ./) (Optional, but required to have root access via SSH) Step 5: Execute 10_init_new_card.sh to write image to your SDCard or somefile.img (in case of a file, you can use it later with dd/etcher/winimager to write to real device) Step 6: Note: run only 10.. script, other files are meant to be called from it in order. (for example 20.. prepares partitions.dat used in 30..)

Below is step by step which I did: Step 1: Download images .img from link: https://www.armbian.com/beelinkx2/ https://www.armbian.com/orange-pi-one/ using the same chipset. Step 2: Use 'Etcher' tool to write .img to the sdcard. https://www.balena.io/etcher/ Step 3: Insert sdcard to the board android box tv r69, Allwinner sun8iw7p1, ram 1GB. Step 4: Power on and get log result from uart debug on board. Error is: "DRAM: 0 MiB ### ERROR ### Please RESET the board ###"

Dear you, I have the same board. I tried many image files from armbian but failed. https://www.armbian.com/beelinkx2/ https://www.armbian.com/orange-pi-one/ Can you install linux images successfully on this android tv box r69? Can you tell me about the way to install that, please? Thank you so much!