Sagittarius

Members
  • Content Count

    9
  • Joined

  • Last visited

About Sagittarius

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Great work !!! Running Armbian Focal with Linux 5.5.1-arm-64 on Dealdig-Boxd6 (clone of Beelink GT1 Ultimate). Just the eth0 does not work with the Amlogic Meson GXM (S912) Q201 dtb. I'll post elsewhere for that.
  2. On a Dealdig BOXD6 (clone of a Beelink GT1 Ultimate SN:LP1..): System: Host: arm Kernel: 5.5.0-rc2-arm-64 aarch64 bits: 64 compiler: gcc v: 7.4.1 Desktop: Xfce 4.14.1 Distro: Ubuntu 19.10 (Eoan Ermine) Machine: Type: ARM Device System: Amlogic Meson GXM (S912) Q201 Development Board details: N/A Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K230 charge: Normal status: Discharging Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M315/M235 charge: Full status: Discharging CPU: Topology: 8-Core (2-Die) model: ARMv8 v8l variant: cortex-a53 bits: 64 type: MCP MCM arch: v8l rev: 4 features: Use -f option to see features bogomips: 0 Speed: 1512 MHz min/max: 100/1512:1000 MHz Core speeds (MHz): 1: 1512 2: 1512 3: 1512 4: 1512 5: 1000 6: 1000 7: 1000 8: 1000 Graphics: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi v: N/A bus ID: N/A Device-2: meson-gxm-mali driver: N/A bus ID: N/A Display: server: X.Org 1.20.5 driver: modesetting unloaded: fbdev resolution: 1920x1080~60Hz OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.1 direct render: Yes Audio: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi bus ID: N/A Device-2: gx-sound-card driver: gx_sound_card bus ID: N/A Sound Server: ALSA v: k5.5.0-rc2-arm-64 Network: Device-1: meson-gxbb-dwmac driver: meson8b_dwmac v: N/A port: N/A bus ID: N/A IF: eth0 state: down mac: <filter> Device-2: pwm-clock driver: pwm_clock v: N/A port: N/A bus ID: N/A IF-ID-1: wlan0 state: up mac: <filter> Drives: Local Storage: total: 58.63 GiB used: 4.42 GiB (7.5%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB ID-2: /dev/mmcblk1 model: SLD32G size: 28.91 GiB Partition: ID-1: / size: 28.65 GiB used: 4.28 GiB (14.9%) fs: ext4 dev: /dev/mmcblk0p2 ID-2: /boot size: 255.7 MiB used: 98.6 MiB (38.6%) fs: vfat dev: /dev/mmcblk0p1 ID-3: /var/log size: 48.4 MiB used: 15.8 MiB (32.6%) fs: ext4 dev: /dev/zram0 Sensors: Missing: Required tool sensors not installed. Check --recommends Info: Processes: 254 Uptime: 13h 57m Memory: 2.68 GiB used: 1.23 GiB (45.8%) Init: systemd runlevel: 5 Compilers: gcc: 9.2.1 Shell: bash v: 5.0.3 inxi: 3.0.36 I've just blackisted panfrost module here that's why inxi command displays llvmpipe. It works also with panfrost but in this case there are errors with the xcursor mask. Works: bluetooth, wlan... Does not work: eth0 and that's all it seems. That eth0 works with kernel 3.x on CoreELEC with gxm_q201_3g_1gbit.dts instead of here meson-gxm-q201.dtb. I was wondering if it's a matter or dts/dtb or kernel module. Anyway, thank you again balbes150 for the good work.
  3. @balbles150 and NicoD, Great job guys. Latest version tested with mesa on a S912. Panfrost is incredibly promising. I've tried with plasma-desktop ant its effects. It's going to be highly usable for a pocket GNU/Linux desktop computer (on a TV Box). But for the time being it crashes a lot with plasma on my personal configuration. Edit: by disabling many effects of the compositor, it is possible to launch many applications including LibreOffice. There are some issues with the mask of the X cursor arrow, the shadows around the windows... But it's very exciting anyway.
  4. X hangs on Armbian_19.11.3_Aml-g12_buster_current_5.4.0_desktop_20191130.img.xz cat /var/log/Xorg.0.log|grep EE [ 20.595] Current Operating System: Linux DEALDIG-BOXD6 5.4.0-aml-g12 #19.11.3 SMP PREEMPT Sat Nov 30 14:48:45 MSK 2019 aarch64 (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.532] (EE) modeset(0): glamor initialization failed System: Host: DEALDIG-BOXD6 Kernel: 5.4.0-aml-g12 aarch64 bits: 64 compiler: gcc v: 7.4.1 Console: tty 1 Distro: Armbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Amlogic Meson GXM (S912) Q201 Development Board details: N/A Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus charge: N/A status: N/A CPU: Topology: 8-Core (2-Die) model: N/A variant: cortex-a53 bits: 64 type: MCP MCM arch: ARMv8 rev: 4 features: Use -f option to see features bogomips: 0 Speed: 1512 MHz min/max: 100/1512:1000 MHz Core speeds (MHz): 1: 1512 2: 1512 3: 1512 4: 1512 5: 1000 6: 1000 7: 1000 8: 1000 Graphics: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi v: N/A bus ID: N/A Device-2: meson-gxm-mali driver: panfrost v: kernel bus ID: N/A Display: server: X.org 1.20.4 driver: fbdev,modesetting tty: 164x33 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi bus ID: N/A Sound Server: ALSA v: k5.4.0-aml-g12 Network: Device-1: meson-gxbb-dwmac driver: meson8b_dwmac v: N/A port: N/A bus ID: N/A IF: eth0 state: down mac: 98:13:39:bd:48:17 Device-2: pwm-clock driver: pwm_clock v: N/A port: N/A bus ID: N/A Device-3: ASIX AX88179 Gigabit Ethernet type: USB driver: ax88179_178a bus ID: 1-2:3 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: 00:0e:c6:f9:e7:6d IF-ID-1: wlan0 state: up mac: 10:d0:7a:bb:b9:ab
  5. I bought a DEALDIG BOXD6 (s912 3GB/32GB) with seems a clone of a Beelink GT1 Ultimate. This box works great with Armbian (bluetooth, WiFi): _ __ __ _ / \ | \/ | | / _ \ | |\/| | | / ___ \| | | | |___ /_/ \_\_| |_|_____| Welcome to Ubuntu Eoan with Armbian Linux 5.3.0-aml-g12 System load: 0.00 0.14 0.25 Up time: 20 min Local users: 3 Memory usage: 14 % of 2805MB IP: 169.254.5.80 192.168.0.124 CPU temp: 50°C Usage of /: 42% of 28G 0 mise à jour peut être installée immédiatement. 0 de ces mises à jour est une mise à jour de sécurité. *** /dev/mmcblk1p2 will be checked for errors at next reboot *** *** /dev/mmcblk1p2 will be checked for errors at next reboot *** Last login: Fri Dec 6 14:19:08 2019 inxi -Fxs System: Host: Dealdig-BOXD6 Kernel: 5.3.0-aml-g12 aarch64 bits: 64 compiler: gcc v: 7.4.1 Console: N/A Distro: Ubuntu 19.10 (Eoan Ermine) Machine: Type: ARM Device System: Amlogic Meson GXM (S912) Q201 Development Board details: N/A Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus charge: 55% (should be ignored) status: Discharging CPU: Topology: 8-Core (2-Die) model: ARMv8 v8l variant: cortex-a53 bits: 64 type: MCP MCM arch: v8l rev: 4 features: Use -f option to see features bogomips: 0 Speed: 1512 MHz min/max: 100/1512:1000 MHz Core speeds (MHz): 1: 1512 2: 1512 3: 1512 4: 1512 5: 1000 6: 1000 7: 1000 8: 1000 Graphics: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi v: N/A bus ID: N/A Device-2: meson-gxm-mali driver: panfrost v: kernel bus ID: N/A Display: server: X.Org 1.20.5 driver: modesetting unloaded: fbdev resolution: 1920x1080~60Hz OpenGL: renderer: panfrost v: 2.1 Mesa 19.2.1 direct render: Yes Audio: Device-1: meson-gxm-dw-hdmi driver: meson_dw_hdmi bus ID: N/A Device-2: meson-gx-audio-core driver: meson_gx_audio_core bus ID: N/A Device-3: simple-audio-card driver: asoc_simple_card bus ID: N/A Sound Server: ALSA v: k5.3.0-aml-g12 Network: Device-1: meson-gxbb-dwmac driver: meson8b_dwmac v: N/A port: N/A bus ID: N/A IF: eth0 state: down mac: 98:13:39:XX:XX:XX Device-2: pwm-clock driver: pwm_clock v: N/A port: N/A bus ID: N/A IF-ID-1: wlan0 state: up mac: 10:d0:7a:XX:XX:XX Drives: Local Storage: total: 28.91 GiB used: 11.60 GiB (40.1%) ID-1: /dev/mmcblk1 model: SLD32G size: 28.91 GiB Partition: ID-1: / size: 27.57 GiB used: 11.50 GiB (41.7%) fs: ext4 dev: /dev/mmcblk1p2 ID-2: /boot size: 121.7 MiB used: 99.9 MiB (82.1%) fs: vfat dev: /dev/mmcblk1p1 ID-3: /var/log size: 48.4 MiB used: 7.3 MiB (15.1%) fs: ext4 dev: /dev/zram0 Sensors: Message: No sensors data was found. Is sensors configured? Info: Processes: 258 Uptime: 7m Memory: 2.74 GiB used: 914.2 MiB (32.6%) Init: systemd runlevel: 5 Compilers: gcc: 9.2.1 clang: 9.0.0-2 Shell: bash v: 5.0.3 inxi: 3.0.36
  6. Thank you very much srx for the detailed and logical explanation. I am very impressed by the possibility of launching on eMMC a desktop environment on a TV box for less than 30€ (here a DEALDIG BOXD6 S912) with everything working (WiFi, Bluetooth, ethernet). So good project. So I'll follow your guide to update the kernel.
  7. armbian devs, I'm really impressed by the job you've done!!! If possible I'd like to know how to update from cli to the new armbian version? Do we need to use the new image? It seems it's not the same as on a regular debian/ubuntu distribution. Because well, in such case the system tells me it can't update the linux-image-aml-g12 package (my TV Box DEALDIG BOXD6 runs Armbian 5.99_Aml-g12_Ubuntu_disco_default_5.3.0_desktop_20191120).
  8. First of all, thank you very much balbes150 and other devs, It's a great project. I've just come to install Armbian 5.99_Aml-g12_Ubuntu_disco_default_5.3.0_desktop_20191120.img.xz on a S912 DEALDIG BOXD6 (clone of Beelink GT1 Ultimate). For that I've used the beelink dtb and it works great. At the beginning I thought it could be difficult because this TV Box was running initially on its eMMC CoreELEC. But there was no issue at all with the toothpick method. I managed to install Armbian following the instructions on the eMMC, it went like a charm. Therefore to be able to run Xfce, I've modified /etc/X11/xorg.conf.d/01-armbian-defaults.conf like this: Section "ServerFlags" Option "AutoAddGPU" "off" Option "Debug" "dmabuf_capable" EndSection Section "OutputClass" Identifier "Lima" MatchDriver "meson" Driver "modesetting" Option "PrimaryGPU" "true" EndSection Section "Monitor" Identifier "LVDS" Option "PreferredMode" "1920x1080" EndSection Not sure if it's right but it works. Thank you again guys.